change sec1210 footprint to handsoldering should ease qfn soldering by hand due to the elongated pads. this also required moveing some traces out of the way on the pcb.
use realistic colors for 5.2mm tact switches as it turns out, step files are plain text -- so search and replace can be used to modify colors reliably search for colors: grep COLOUR_RGB SKQGAF-realcolors.STEP|awk -F= '{print $2}'|sort|uniq -c replace them with sed -i "s/$OLDCOLOR/$NEWCOLOR/" SKQGAF-realcolors.STEP
redesign frontend with 5.2mm tact switches reason being, those are flat enough so they don't protrude above the oled. I'm thinking about putting a lasercut sheet of plexiglass as a protecting case in front
seperate hardpass-frontend from hardpass-sci, II (I) was sci (II) is frontend also general cleanup and version bump to 0.2.5
seperate hardpass and hardpass-sci kicad projects
small fixes schematic: add either-or text to card-led pcb: connect c10 to card-pin1
switch smartcard chip to microchip SEC1210
ssd1306: 3d model flatflex; correct thickness also includes blender model and wings-file (for coloring)
add model for ssd1306 i finally managed to convince joe su to relicense monitor_tinyscreen under a free license. his model has now been included in hardpass' kicad project, and he is credited inhardpass.3dshapes/README.md
PCB cleanup silkscreen, fab-layer on the fabrication layer all the values of the small components like resistors and capactiors are now inside the footprints for easier referencing. the silk screen markings have been cleaned up as well, most notably moved them off the footprints on hardpass, and aligned them neatly on hardpass-sci, where some of the automatically placed ones were even on top of solder pads.