]>
git.gir.st - hardpass.git/log
summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
girst [Sat, 16 Sep 2017 12:54:58 +0000 (14:54 +0200)]
use relative paths for custom 3d models
i tried to do this before, but pcbnew just moved up the directory tree until it hit root (using ../), then used the absolute path again.
kicad.info forums suggested to use ${KIPRJMOD}, which works.
girst [Wed, 30 Aug 2017 20:33:13 +0000 (22:33 +0200)]
PCB cleanup silkscreen, fab-layer
on the fabrication layer all the values of the small components like
resistors and capactiors are now inside the footprints for easier
referencing.
the silk screen markings have been cleaned up as well, most notably
moved them off the footprints on hardpass, and aligned them neatly on
hardpass-sci, where some of the automatically placed ones were even on
top of solder pads.
girst [Fri, 25 Aug 2017 17:15:11 +0000 (19:15 +0200)]
fix missing trace on hardpass-scm
also removes a small not-connected-to-anything trace under the oled.
girst [Sun, 23 Jul 2017 14:52:05 +0000 (16:52 +0200)]
minimal cleanup on pcb
girst [Sun, 23 Jul 2017 11:06:06 +0000 (13:06 +0200)]
increase version number on pcb
girst [Sat, 22 Jul 2017 18:14:31 +0000 (20:14 +0200)]
reset circuit works; cleanup on it
girst [Sat, 10 Jun 2017 21:48:11 +0000 (23:48 +0200)]
remove other non-ic reset methods
girst [Sat, 10 Jun 2017 20:41:42 +0000 (22:41 +0200)]
reset circuit redesign WARN: multiple defined@once
girst [Thu, 23 Mar 2017 00:01:19 +0000 (01:01 +0100)]
fixed multiple things, add gnu logo
fixed:
* mounting holes now non plated
* fixed a few wires here and there
* added a gnu/gpl logo for testing graphics
girst [Sun, 19 Mar 2017 21:51:43 +0000 (22:51 +0100)]
cleanup tracks around xtal
girst [Sun, 19 Mar 2017 07:39:49 +0000 (08:39 +0100)]
add 3d model to pcb
used absolute filepath because kicad won't show it otherwise. bummer.
girst [Sun, 19 Mar 2017 07:32:53 +0000 (08:32 +0100)]
idiot me can't double check pwd
girst [Sun, 19 Mar 2017 07:30:30 +0000 (08:30 +0100)]
created 3d model for sim holder
accuracy is questionable, but i call it good enough for a first try.
girst [Fri, 17 Mar 2017 19:43:44 +0000 (20:43 +0100)]
update README to include adafruit license
forgive me, for i have sinned by not including the adafruit license text
for their awesome sd1306 footprint. the footprint was extracted from the
eagle library with kicad's library editor.
girst [Fri, 17 Mar 2017 19:33:08 +0000 (20:33 +0100)]
more file cleanup
noticed some backup and drc files in there. oops
girst [Sat, 11 Mar 2017 21:31:10 +0000 (22:31 +0100)]
delete unnecessary files
girst [Sat, 11 Mar 2017 21:27:11 +0000 (22:27 +0100)]
added markers around potentially unnecessary capacitors
keeping them in the schema until testing on physical board has been
done.
girst [Sat, 11 Mar 2017 21:13:02 +0000 (22:13 +0100)]
change crystal to smd
also added GND-netname to sim-mech-pads from within pcbnew. this will
sadly automatically be reverted everytime you load the netlist, as i
haven't bothered updating the footprint itself (then i'd have to add it
in the schematic too, and that part is already pretty cluttered)
girst [Sat, 11 Mar 2017 20:25:04 +0000 (21:25 +0100)]
Revert "cleanup, but accidentally deleted smartcard-pcb"
This reverts commit
a86da60cfe61b4d59f182c2c3fe14bc6cea5c2cc .
girst [Sat, 11 Mar 2017 20:20:01 +0000 (21:20 +0100)]
cleanup, but accidentally deleted smartcard-pcb
girst [Sat, 21 Jan 2017 15:44:54 +0000 (16:44 +0100)]
board design work
girst [Sat, 21 Jan 2017 15:11:27 +0000 (16:11 +0100)]
fixed bug (shdn_N), removed caps
according to data sheet, shdn_n needs to be high to activate card (page43)
2 bypass caps have been removed according to page 8 of AN00046
girst [Thu, 19 Jan 2017 15:44:57 +0000 (16:44 +0100)]
routed 2nd board
not finished, but a start
girst [Thu, 19 Jan 2017 14:45:45 +0000 (15:45 +0100)]
added pin header for second board
girst [Thu, 19 Jan 2017 14:24:20 +0000 (15:24 +0100)]
created footprint for sim slot
will use a linkconn sim connector, available from aliexpress using the term 'samsung note n7000 i9000 9003 sim connector'
girst [Wed, 18 Jan 2017 23:09:10 +0000 (00:09 +0100)]
added note to schema
possible driver to use with the tda
girst [Wed, 18 Jan 2017 23:06:47 +0000 (00:06 +0100)]
moving stuff around the tda8029
rotated schema back to normal
girst [Wed, 18 Jan 2017 22:28:58 +0000 (23:28 +0100)]
wired up tda8029
girst [Wed, 18 Jan 2017 21:23:31 +0000 (22:23 +0100)]
add tda8029 footprint
girst [Sat, 7 Jan 2017 14:44:33 +0000 (15:44 +0100)]
added logo
girst [Sat, 7 Jan 2017 14:42:24 +0000 (15:42 +0100)]
re-done pcb for 30 pin oled
pcb was completely redone, fixing header-misalignment (hopefully) and removing ugly silk screen from the front
girst [Mon, 21 Nov 2016 17:59:08 +0000 (18:59 +0100)]
removed a few footprint labels for cleaner look
girst [Mon, 21 Nov 2016 17:51:46 +0000 (18:51 +0100)]
Merge branch 'master' of https://github.com/girst/hardpass-passwordmanager
girst [Mon, 21 Nov 2016 17:49:12 +0000 (18:49 +0100)]
removed spi labels from oled (won#t happen anyways)
girst [Mon, 21 Nov 2016 17:48:26 +0000 (18:48 +0100)]
added reset circuit to oled
girst [Mon, 12 Sep 2016 17:38:33 +0000 (19:38 +0200)]
Actually use the device argument
see https://github.com/girst/hardpass-sendHID/pull/2/files
girst [Sat, 20 Aug 2016 19:09:10 +0000 (21:09 +0200)]
updated README
girst [Sat, 20 Aug 2016 19:07:58 +0000 (21:07 +0200)]
removed .git from subdirectories
girst [Sat, 20 Aug 2016 18:55:10 +0000 (20:55 +0200)]
Code import into new repository (long overdue)