Fix Makefiles.
[tmk_keyboard.git] / converter / x68k_usb / Makefile
CommitLineData
38d61ee1 1#
2# Makefile for PJRC Teensy
3#
4
5
6# Target file name (without extension).
7TARGET = x68k_usb_pjrc
8
9# Directory common source filess exist
afb08462 10TOP_DIR = ../..
38d61ee1 11
12# Directory keyboard dependent files exist
13TARGET_DIR = .
14
15# keyboard dependent files
2769f09d 16SRC = keymap.c \
38d61ee1 17 matrix.c \
18 led.c \
19 x68k.c
20
21CONFIG_H = config_pjrc.h
22
23
24# MCU name, you MUST set this to match the board you are using
25# type "make clean" after changing this, so all files will be rebuilt
26#MCU = at90usb162 # Teensy 1.0
27MCU = atmega32u4 # Teensy 2.0
28#MCU = at90usb646 # Teensy++ 1.0
29#MCU = at90usb1286 # Teensy++ 2.0
30
31
32# Processor frequency.
33# Normally the first thing your program should do is set the clock prescaler,
34# so your program will run at the correct speed. You should also set this
35# variable to same clock speed. The _delay_ms() macro uses this, and many
36# examples use this variable to calculate timings. Do not add a "UL" here.
37F_CPU = 16000000
38
39
40# Build Options
41# *Comment out* to disable the options.
42#
43MOUSEKEY_ENABLE = yes # Mouse keys
44EXTRAKEY_ENABLE = yes # Audio control and System control
45NKRO_ENABLE = yes # USB Nkey Rollover
46
47
48
49#---------------- Programming Options --------------------------
50AVRDUDE = avrdude
51# Type: avrdude -c ? to get a full listing.
52AVRDUDE_PROGRAMMER = avr109
53AVRDUDE_PORT = /dev/ttyACM0
54AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
55#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
56
57# Uncomment the following if you want avrdude's erase cycle counter.
58# Note that this counter needs to be initialized first using -Yn,
59# see avrdude manual.
60#AVRDUDE_ERASE_COUNTER = -y
61
62# Uncomment the following if you do /not/ wish a verification to be
63# performed after programming the device.
64#AVRDUDE_NO_VERIFY = -V
65
66# Increase verbosity level. Please use this when submitting bug
67# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
68# to submit bug reports.
69#AVRDUDE_VERBOSE = -v -v
70
71AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
72#AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
73AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
74AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
75AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
76
77#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
78#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
79PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
80
81
2769f09d 82# Search Path
83VPATH += $(TARGET_DIR)
84VPATH += $(TOP_DIR)
85
38d61ee1 86
63d82fca 87include $(TOP_DIR)/protocol/pjrc.mk
88include $(TOP_DIR)/protocol.mk
89include $(TOP_DIR)/common.mk
90include $(TOP_DIR)/rules.mk
Imprint / Impressum