[tmk_keyboard.git] / orphan / ascii_usb / Makefile

# Target file name (without extension).
TARGET = ascii_usb

# Directory common source filess exist
TMK_DIR = ../../tmk_core

# Directory keyboard dependent files exist
TARGET_DIR = .

# keyboard dependent files
SRC =	keymap.c \
	matrix.c \
	led.c \
	protocol/serial_uart.c

CONFIG_H = config.h


# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162       # Teensy 1.0
MCU = atmega32u4       # Teensy 2.0
#MCU = at90usb646       # Teensy++ 1.0
#MCU = at90usb1286      # Teensy++ 2.0


# Processor frequency.
#   Normally the first thing your program should do is set the clock prescaler,
#   so your program will run at the correct speed.  You should also set this
#   variable to same clock speed.  The _delay_ms() macro uses this, and many
#   examples use this variable to calculate timings.  Do not add a "UL" here.
F_CPU = 16000000


#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8

# Input clock frequency.
#     This will define a symbol, F_USB, in all source code files equal to the
#     input clock frequency (before any prescaling is performed) in Hz. This value may
#     differ from F_CPU if prescaling is used on the latter, and is required as the
#     raw input clock is fed directly to the PLL sections of the AVR for high speed
#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
#     at the end, this will be done automatically to create a 32-bit value in your
#     source code.
#
#     If no clock division is performed on the input clock inside the AVR (via the
#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)

# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT


# Build Options
#   *Comment out* to disable the options.
#
#MOUSEKEY_ENABLE = yes	# Mouse keys
#EXTRAKEY_ENABLE = yes	# Audio control and System control
CONSOLE_ENABLE = yes	# Console for debug
#NKRO_ENABLE = yes	# USB Nkey Rollover


# Boot Section Size in bytes
#   Teensy halfKay   512
#   Atmel DFU loader 4096
#   LUFA bootloader  4096
OPT_DEFS += -DBOOTLOADER_SIZE=4096


# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)


include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk
Commit	Line	Data
92cda14f	1	# Target file name (without extension).
	2	TARGET = ascii_usb
	3
	4	# Directory common source filess exist
7860d099	5	TMK_DIR = ../../tmk_core
92cda14f	6
	7	# Directory keyboard dependent files exist
	8	TARGET_DIR = .
	9
	10	# keyboard dependent files
	11	SRC = keymap.c \
	12	matrix.c \
	13	led.c \
	14	protocol/serial_uart.c
	15
	16	CONFIG_H = config.h
	17
	18
	19	# MCU name, you MUST set this to match the board you are using
	20	# type "make clean" after changing this, so all files will be rebuilt
	21	#MCU = at90usb162 # Teensy 1.0
	22	MCU = atmega32u4 # Teensy 2.0
	23	#MCU = at90usb646 # Teensy++ 1.0
	24	#MCU = at90usb1286 # Teensy++ 2.0
	25
	26
	27	# Processor frequency.
	28	# Normally the first thing your program should do is set the clock prescaler,
	29	# so your program will run at the correct speed. You should also set this
	30	# variable to same clock speed. The _delay_ms() macro uses this, and many
	31	# examples use this variable to calculate timings. Do not add a "UL" here.
	32	F_CPU = 16000000
	33
	34
	35	#
	36	# LUFA specific
	37	#
	38	# Target architecture (see library "Board Types" documentation).
	39	ARCH = AVR8
	40
	41	# Input clock frequency.
	42	# This will define a symbol, F_USB, in all source code files equal to the
	43	# input clock frequency (before any prescaling is performed) in Hz. This value may
	44	# differ from F_CPU if prescaling is used on the latter, and is required as the
	45	# raw input clock is fed directly to the PLL sections of the AVR for high speed
	46	# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
	47	# at the end, this will be done automatically to create a 32-bit value in your
	48	# source code.
	49	#
	50	# If no clock division is performed on the input clock inside the AVR (via the
	51	# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
	52	F_USB = $(F_CPU)
	53
	54	# Interrupt driven control endpoint task
	55	OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
	56
	57
	58	# Build Options
	59	# Comment out to disable the options.
	60	#
	61	#MOUSEKEY_ENABLE = yes # Mouse keys
	62	#EXTRAKEY_ENABLE = yes # Audio control and System control
	63	CONSOLE_ENABLE = yes # Console for debug
	64	#NKRO_ENABLE = yes # USB Nkey Rollover
	65
	66
	67	# Boot Section Size in bytes
	68	# Teensy halfKay 512
	69	# Atmel DFU loader 4096
70	# LUFA bootloader 4096
71	OPT_DEFS += -DBOOTLOADER_SIZE=4096
72
73
74	# Search Path
75	VPATH += $(TARGET_DIR)
b4e2d325	76	VPATH += $(TMK_DIR)
92cda14f	77
92cda14f	78
b4e2d325	79	include $(TMK_DIR)/protocol/lufa.mk
	80	include $(TMK_DIR)/protocol.mk
	81	include $(TMK_DIR)/common.mk
	82	include $(TMK_DIR)/rules.mk