Added SHARP X68000 keyboard support.
[tmk_keyboard.git] / x68k_usb / Makefile
CommitLineData
38d61ee1 1#
2# Makefile for PJRC Teensy
3#
4
5
6# Target file name (without extension).
7TARGET = x68k_usb_pjrc
8
9# Directory common source filess exist
10COMMON_DIR = ..
11
12# Directory keyboard dependent files exist
13TARGET_DIR = .
14
15# keyboard dependent files
16SRC = main.c \
17 keymap.c \
18 matrix.c \
19 led.c \
20 x68k.c
21
22CONFIG_H = config_pjrc.h
23
24
25# MCU name, you MUST set this to match the board you are using
26# type "make clean" after changing this, so all files will be rebuilt
27#MCU = at90usb162 # Teensy 1.0
28MCU = atmega32u4 # Teensy 2.0
29#MCU = at90usb646 # Teensy++ 1.0
30#MCU = at90usb1286 # Teensy++ 2.0
31
32
33# Processor frequency.
34# Normally the first thing your program should do is set the clock prescaler,
35# so your program will run at the correct speed. You should also set this
36# variable to same clock speed. The _delay_ms() macro uses this, and many
37# examples use this variable to calculate timings. Do not add a "UL" here.
38F_CPU = 16000000
39
40
41# Build Options
42# *Comment out* to disable the options.
43#
44MOUSEKEY_ENABLE = yes # Mouse keys
45EXTRAKEY_ENABLE = yes # Audio control and System control
46NKRO_ENABLE = yes # USB Nkey Rollover
47
48
49
50#---------------- Programming Options --------------------------
51AVRDUDE = avrdude
52# Type: avrdude -c ? to get a full listing.
53AVRDUDE_PROGRAMMER = avr109
54AVRDUDE_PORT = /dev/ttyACM0
55AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
56#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
57
58# Uncomment the following if you want avrdude's erase cycle counter.
59# Note that this counter needs to be initialized first using -Yn,
60# see avrdude manual.
61#AVRDUDE_ERASE_COUNTER = -y
62
63# Uncomment the following if you do /not/ wish a verification to be
64# performed after programming the device.
65#AVRDUDE_NO_VERIFY = -V
66
67# Increase verbosity level. Please use this when submitting bug
68# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
69# to submit bug reports.
70#AVRDUDE_VERBOSE = -v -v
71
72AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
73#AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
74AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
75AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
76AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
77
78#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
79#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
80PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
81
82
83
84include $(COMMON_DIR)/pjrc.mk
85include $(COMMON_DIR)/common.mk
Imprint / Impressum