Merge branch 'unimap'
[tmk_keyboard.git] / converter / x68k_usb / config.h
CommitLineData
38d61ee1 1/*
2Copyright 2012 Jun Wako <wakojun@gmail.com>
3
4This program is free software: you can redistribute it and/or modify
5it under the terms of the GNU General Public License as published by
6the Free Software Foundation, either version 2 of the License, or
7(at your option) any later version.
8
9This program is distributed in the hope that it will be useful,
10but WITHOUT ANY WARRANTY; without even the implied warranty of
11MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12GNU General Public License for more details.
13
14You should have received a copy of the GNU General Public License
15along with this program. If not, see <http://www.gnu.org/licenses/>.
16*/
17
18#ifndef CONFIG_H
19#define CONFIG_H
20
38d61ee1 21
22#define VENDOR_ID 0xFEED
23#define PRODUCT_ID 0x6800
e3994a62 24#define DEVICE_VER 0x0001
38d61ee1 25#define MANUFACTURER t.m.k.
26#define PRODUCT SHARP X68000 keyboard converter
27#define DESCRIPTION converts SHARP X68000 keyboard protocol into USB
28
29
30/* matrix size */
31#define MATRIX_ROWS 16
32#define MATRIX_COLS 8
33
34
35/* key combination for command */
36#define IS_COMMAND() ( \
ce2e06c3 37 keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
f45f4193 38 keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
39 keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) \
38d61ee1 40)
41
38d61ee1 42
43/* USART configuration
44 * asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
45 */
e3994a62 46#if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__)
42c96241 47 #define SERIAL_UART_BAUD 2400
48 #define SERIAL_UART_DATA UDR1
49 #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
50 #define SERIAL_UART_RXD_VECT USART1_RX_vect
51 #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
52 #define SERIAL_UART_INIT() do { \
53 UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
54 UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
55 UCSR1B = (1<<RXCIE1) | (1<<RXEN1) | /* RX: interrupt, RX: enable */ \
56 (1<<TXEN1); /* TX: enable */ \
f45f4193 57 UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
58 (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
42c96241 59 sei(); \
38d61ee1 60 } while(0)
61#else
62# error "USART configuration is needed."
63#endif
64
65#endif
Imprint / Impressum