]> git.gir.st - tmk_keyboard.git/blame - keyboard/fc980c/README.md
git://git.gir.st / tmk_keyboard.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
remove experimental return, cleanup slash_question key
[tmk_keyboard.git] / keyboard / fc980c / README.md
CommitLineData
86225e25 1FC980C Alt controller
2=====================
e3036006 32017/07/21
86225e25 4
e3036006 5This controler replaces original controller of Leopold FC980C and makes the keyboard programmable.
6
7Discuss this here: https://geekhack.org/index.php?topic=90681.0
8
9The keyboard is very similar electronically to its sibling model FC660C you can also refer this.
86225e25 10
11FC660C Alt Controller: https://geekhack.org/index.php?topic=88439.0
12
13
e3036006 14Hardware
86225e25 15--------
e3036006 16This project uses common and familiar ATmega32u4 but any microcontroller with 5V I/O will work.
86225e25 17
e3036006 18- Schematic of Alt controller: schematic.pdf
86225e25 19
20
e3036006 21Pin configuration
22-----------------
23Connector bridging between switch board and controller is Hirose DF14A-20P-1.25H.
86225e25 24
25 |Switch |Controller |
26 | board | board |Description |Function |ATmega32u4
27 |--------|-----------|--------------------------------------|-----------|------------
28 | 1 |20 | FG |FG |GND
29 | 2 |19 | GND |GND |GND
30 | 3 |18 | GND |GND |GND
31 | 4 |17 | 3.3V |V33 |3.3V/5V
32 | 5 |16 | 5V |Vcc |5V
33 | 6 |15 |*Z6-TP1684-4-HYS(o) |KEY_HYS |PC7
34 | 7 |14 |*Z6-TP1684-2-KEY(i) |KEY_STATE |PC6
e3036006 35 | 8 |13 |*Z7-AD5258-5-SCL(I2C) |I2C_SCL |PD0(TWI)
86225e25 36 | 9 |12 |*Z7-AD5258-4-SDA(I2C) |I2C_SDA |PD1(TWI)
e3036006 37 |10 |11 |*Z5/4-LV4051A-6-~EN(Lo:Z5 Hi:Z4) |COL_bit3 |PB3
38 |11 |10 |+Z3-LV07A-5 (LV4051A-9-C) |COL_bit2 |PB2
39 |12 | 9 |+Z3-LV07A-1 (LV4051A-10-B) |COL_bit1 |PB1
40 |13 | 8 |+Z3-LV07A-3 (LV4051A-11-A) |COL_bit0 |PB0
41 |14 | 7 |+Z1-LVC138A-3-C |ROW_bit2 |PD6
42 |15 | 6 |+Z1-LVC138A-2-B |ROW_bit1 |PD5
43 |16 | 5 |+Z1-LVC138A-1-A |ROW_bit0 |PD4
44 |17 | 4 |+Z1-LVC138A-4-~G2A Z6-TP1684-5-~EN |KEY_ENABLE |PD7
45 |18 | 3 |+Q4-NPN-B-NumLock_LED(Hi:On) |LED_NUML |PB4
46 |19 | 2 |+Q3-NPN-B-CapsLock_LED(Hi:On) |LED_CAPS |PB5
47 |20 | 1 |+Q2-NPN-B-ScrollLock_LED(Hi:On) |LED_SCRL |PB6
86225e25 48
49```
50* 5V intferface
51+ 3.3V interface
52```
53
86225e25 54
e3036006 55Switch matrix
56-------------
86225e25 57
58 | |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |A |B |C |D |E |F |
59 |----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|----|
60 | 0|Left|RCtl|RAlt| |Down|P. |Righ|P0 |X |LGui|` |V | |Esc |M |Spc |
6ec73941 61 | 1|Fn |. | | |P1 |PEnt|P2 |P3 |Z |LAlt|LCtl|C |K | |N |B |
86225e25 62 | 2|' |/ |, | |P4 |P+ |P5 |P6 |D |A |LSft|F |J |F1 |H |G |
63 | 3|RSft|; |L |] |Up | | | |S |Q |Caps|R |I |F3 |U |T |
64 | 4| | | | | | | | | | | | | | | | |
65 | 5|= |- |0 |\ |NLck|BSpc|P/ |P* |3 |2 | |4 |9 |F2 |7 |6 |
66 | 6|[ |P |O |Ent |P7 |P- |P8 |P9 |W |1 |Tab |E |8 |F4 |Y |5 |
67 | 7|F11 |F10 |F9 |F12 |Del |PgDn|Ins |PgUp| | | | |F8 |F5 |F7 |F6 |
68
69
e3036006 70Row designation
71---------------
72LV138A(Z1) selects one of 8 row lines and gives strobe by enabling with ~G2A(17).
86225e25 73
e3036006 74 |ROW |bit0|bit1|bit2|
86225e25 75 |----|----|----|----|
76 |0 |0 |0 |0 |
77 |1 |1 |0 |0 |
78 |2 |0 |1 |0 |
79 |3 |1 |1 |0 |
80 |4 |0 |0 |1 |
81 |5 |1 |0 |1 |
82 |6 |0 |1 |1 |
83 |7 |1 |1 |1 |
84
85
e3036006 86Column designation
87------------------
86225e25 88LV4051A(Z4, Z5) select one of 16 column lines to sense capacitance of switches.
89
e3036006 90 |COL |bit0|bit1|bit2|bit3|
91 |----|----|----|----|----|
92 |0 |0 |0 |0 |0 |
93 |1 |1 |0 |0 |0 |
94 |2 |0 |1 |0 |0 |
95 |3 |1 |1 |0 |0 |
96 |4 |0 |0 |1 |0 |
97 |5 |1 |0 |1 |0 |
98 |6 |0 |1 |1 |0 |
99 |7 |1 |1 |1 |0 |
100 |8 |0 |0 |0 |1 |
101 |9 |1 |0 |0 |1 |
102 |A |0 |1 |0 |1 |
103 |B |1 |1 |0 |1 |
104 |C |0 |0 |1 |1 |
105 |D |1 |0 |1 |1 |
106 |E |0 |1 |1 |1 |
107 |F |1 |1 |1 |1 |
108
109
110Firmware
111--------
112Just `make` to build firmware. And consult with wiki for further information.
113
114- https://github.com/tmk/tmk_keyboard/tree/master/keyboard/fc660c
115- https://github.com/tmk/tmk_keyboard/wiki
86225e25 116
117
118Datasheets
119----------
120- Hirose DF14A-20P-1.25H: http://www.mouser.com/ds/2/185/DF14_catalog-939195.pdf
121- LV07A: http://www.ti.com/lit/ds/symlink/sn74lv07a.pdf
122- LV138A: http://www.ti.com/lit/ds/symlink/sn74lvc138a.pdf
123- LV4051A: http://www.ti.com/lit/ds/symlink/sn74lv4051a.pdf
124- AD5258: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5258.pdf
e3036006 125- JST S5B-PH-SM4: http://www.jst-mfg.com/product/pdf/eng/ePH.pdf
126- Hirose UX60SC-MB-5S8: https://www.hirose.com/product/en/products/UX/UX60SC-MB-5S8%2880%29/
127- TYU TU1252WNR-05S: http://php2.twinner.com.tw/files/tyu/TU1252series.pdf
128- Tr(E42) for LED?: http://cj-elec.com/txUpfile/2013614923661845.pdf
86225e25 129
130
1313.3V power supply
132-----------------
133LV07A and LVC138A are 5V-tolerant and can be powered with 5V, the keyboard will work only with 5V power supply. It may not be completely safe to operate LV138A with 5V Vcc, its datasheet says:
134
135> Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
136
e3036006 137
86225e25 138Digipot AD5258
139--------------
140Controller can operate AD5258 via I2C to change actuation point of keys. This may make keyboard unusable accidentally and it will be difficult to recovery in some situation. For safety firmware doesn't support it at this point, though.
141
142Lower value of RDAC register causes shallower actuation point.
143
e3036006 144
145USB connector board
146-------------------
147The keyboard has USB receptacle on small separate 1.0mm-thick PCB. USB receptacle is Hirose UX60SC-MB-5S8 while wire-to-PCB connector is TYU TU1252WNR-05S.
148
149http://i.imgur.com/Nucn6h9.jpg
150
151
86225e25 152Resources
153---------
154- Pics: http://imgur.com/a/HhyIq
custom keymap for my minivan; forked from http://github.com/evangs/tmk_keyboard
Imprint / Impressum