| | 1 | # Target file name (without extension). |
| | 2 | TARGET = sun_usb |
| | 3 | |
| | 4 | # Directory common source filess exist |
| | 5 | TMK_DIR = ../../tmk_core |
| | 6 | |
| | 7 | # Directory keyboard dependent files exist |
| | 8 | TARGET_DIR = . |
| | 9 | |
| | 10 | # keyboard dependent files |
| | 11 | SRC = keymap.c \ |
| | 12 | matrix.c \ |
| | 13 | led.c \ |
| | 14 | command_extra.c |
| | 15 | |
| | 16 | |
| | 17 | CONFIG_H = config.h |
| | 18 | |
| | 19 | |
| | 20 | # MCU name, you MUST set this to match the board you are using |
| | 21 | # type "make clean" after changing this, so all files will be rebuilt |
| | 22 | #MCU = at90usb162 # Teensy 1.0 |
| | 23 | #MCU = atmega32u4 # Teensy 2.0 |
| | 24 | #MCU = at90usb646 # Teensy++ 1.0 |
| | 25 | #MCU = at90usb1286 # Teensy++ 2.0 |
| | 26 | MCU = atmega32u2 |
| | 27 | |
| | 28 | |
| | 29 | # Processor frequency. |
| | 30 | # Normally the first thing your program should do is set the clock prescaler, |
| | 31 | # so your program will run at the correct speed. You should also set this |
| | 32 | # variable to same clock speed. The _delay_ms() macro uses this, and many |
| | 33 | # examples use this variable to calculate timings. Do not add a "UL" here. |
| | 34 | F_CPU = 16000000 |
| | 35 | |
| | 36 | |
| | 37 | # |
| | 38 | # LUFA specific |
| | 39 | # |
| | 40 | # Target architecture (see library "Board Types" documentation). |
| | 41 | ARCH = AVR8 |
| | 42 | |
| | 43 | # Input clock frequency. |
| | 44 | # This will define a symbol, F_USB, in all source code files equal to the |
| | 45 | # input clock frequency (before any prescaling is performed) in Hz. This value may |
| | 46 | # differ from F_CPU if prescaling is used on the latter, and is required as the |
| | 47 | # raw input clock is fed directly to the PLL sections of the AVR for high speed |
| | 48 | # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' |
| | 49 | # at the end, this will be done automatically to create a 32-bit value in your |
| | 50 | # source code. |
| | 51 | # |
| | 52 | # If no clock division is performed on the input clock inside the AVR (via the |
| | 53 | # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. |
| | 54 | F_USB = $(F_CPU) |
| | 55 | |
| | 56 | # Interrupt driven control endpoint task |
| | 57 | OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT |
| | 58 | |
| | 59 | |
| | 60 | # Build Options |
| | 61 | # *Comment out* to disable the options. |
| | 62 | # |
| | 63 | MOUSEKEY_ENABLE = yes # Mouse keys |
| | 64 | EXTRAKEY_ENABLE = yes # Audio control and System control |
| | 65 | CONSOLE_ENABLE = yes # Console for debug |
| | 66 | COMMAND_ENABLE = yes # Commands for debug and configuration |
| | 67 | #HARDWARE_SERIAL = yes # Use hardware serial (requires inverted serial, see README) |
| | 68 | #NKRO_ENABLE = yes # USB Nkey Rollover |
| | 69 | |
| | 70 | ifdef HARDWARE_SERIAL |
| | 71 | SRC := protocol/serial_uart.c $(SRC) |
| | 72 | OPT_DEFS += -DHARDWARE_SERIAL |
| | 73 | else |
| | 74 | SRC := protocol/serial_soft.c $(SRC) |
| | 75 | endif |
| | 76 | |
| | 77 | # Boot Section Size in bytes |
| | 78 | # Teensy halfKay 512 |
| | 79 | # Atmel DFU loader 4096 |
| | 80 | # LUFA bootloader 4096 |
| | 81 | OPT_DEFS += -DBOOTLOADER_SIZE=4096 |
| | 82 | |
| | 83 | |
| | 84 | # Search Path |
| | 85 | VPATH += $(TARGET_DIR) |
| | 86 | VPATH += $(TMK_DIR) |
| | 87 | |
| | 88 | |
| | 89 | include $(TMK_DIR)/protocol/lufa.mk |
| | 90 | include $(TMK_DIR)/protocol.mk |
| | 91 | include $(TMK_DIR)/common.mk |
| | 92 | include $(TMK_DIR)/rules.mk |
git://git.gir.st / tmk_keyboard.git / blame_incremental