]>
Commit | Line | Data |
---|---|---|
1 | # Target file name (without extension). | |
2 | TARGET = terminal_lufa | |
3 | ||
4 | # Directory common source filess exist | |
5 | TMK_DIR = ../../tmk_core | |
6 | ||
7 | # Directory keyboard dependent files exist | |
8 | TARGET_DIR = . | |
9 | ||
10 | # keyboard dependent files | |
11 | SRC = keymap.c \ | |
12 | matrix.c \ | |
13 | led.c | |
14 | ||
15 | CONFIG_H = config.h | |
16 | ||
17 | ||
18 | # MCU name, you MUST set this to match the board you are using | |
19 | # type "make clean" after changing this, so all files will be rebuilt | |
20 | #MCU = at90usb162 # Teensy 1.0 | |
21 | MCU = atmega32u4 # Teensy 2.0 | |
22 | #MCU = at90usb646 # Teensy++ 1.0 | |
23 | #MCU = at90usb1286 # Teensy++ 2.0 | |
24 | ||
25 | ||
26 | # Processor frequency. | |
27 | # Normally the first thing your program should do is set the clock prescaler, | |
28 | # so your program will run at the correct speed. You should also set this | |
29 | # variable to same clock speed. The _delay_ms() macro uses this, and many | |
30 | # examples use this variable to calculate timings. Do not add a "UL" here. | |
31 | F_CPU = 16000000 | |
32 | ||
33 | ||
34 | # | |
35 | # LUFA specific | |
36 | # | |
37 | # Target architecture (see library "Board Types" documentation). | |
38 | ARCH = AVR8 | |
39 | ||
40 | # Input clock frequency. | |
41 | # This will define a symbol, F_USB, in all source code files equal to the | |
42 | # input clock frequency (before any prescaling is performed) in Hz. This value may | |
43 | # differ from F_CPU if prescaling is used on the latter, and is required as the | |
44 | # raw input clock is fed directly to the PLL sections of the AVR for high speed | |
45 | # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' | |
46 | # at the end, this will be done automatically to create a 32-bit value in your | |
47 | # source code. | |
48 | # | |
49 | # If no clock division is performed on the input clock inside the AVR (via the | |
50 | # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. | |
51 | F_USB = $(F_CPU) | |
52 | ||
53 | # Interrupt driven control endpoint task | |
54 | OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT | |
55 | ||
56 | ||
57 | # Boot Section Size in bytes | |
58 | # Teensy halfKay 512 | |
59 | # Atmel DFU loader 4096 | |
60 | # LUFA bootloader 4096 | |
61 | OPT_DEFS += -DBOOTLOADER_SIZE=4096 | |
62 | ||
63 | ||
64 | # Build Options | |
65 | # comment out to disable the options. | |
66 | # | |
67 | #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) | |
68 | #MOUSEKEY_ENABLE = yes # Mouse keys(+4700) | |
69 | #EXTRAKEY_ENABLE = yes # Audio control and System control(+450) | |
70 | CONSOLE_ENABLE = yes # Console for debug(+400) | |
71 | COMMAND_ENABLE = yes # Commands for debug and configuration | |
72 | #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend | |
73 | #NKRO_ENABLE = yes # USB Nkey Rollover | |
74 | ||
75 | ||
76 | # | |
77 | # PS/2 protocol implementations | |
78 | # USART is recommended if it is available, others are for reference purpose. | |
79 | # INT implementation will drop simultaneous key strokes. | |
80 | # | |
81 | PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) | |
82 | #PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin | |
83 | #PS2_USE_BUSYWAIT = yes # uses primitive reference code | |
84 | ||
85 | ||
86 | #---------------- Programming Options -------------------------- | |
87 | PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex | |
88 | ||
89 | ||
90 | # Search Path | |
91 | VPATH += $(TARGET_DIR) | |
92 | VPATH += $(TMK_DIR) | |
93 | ||
94 | ||
95 | include $(TMK_DIR)/protocol/lufa.mk | |
96 | include $(TMK_DIR)/protocol.mk | |
97 | include $(TMK_DIR)/common.mk | |
98 | include $(TMK_DIR)/rules.mk |