| | 1 | The Ghost Squid controller |
| | 2 | ========================== |
| | 3 | Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany. |
| | 4 | |
| | 5 | *Note that this is not the official firmware* |
| | 6 | |
| | 7 | Build |
| | 8 | ----- |
| | 9 | Move to this directory then just run `make` like: |
| | 10 | |
| | 11 | $ make -f Makefile.lufa |
| | 12 | |
| | 13 | At the moment only the LUFA stack is supported. |
| | 14 | |
| | 15 | |
| | 16 | Bootloader |
| | 17 | --------- |
| | 18 | To enter bootloader by hardware use a magnet above the controller before connecting the usb cable. |
| | 19 | |
| | 20 | It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though. |
git://git.gir.st / tmk_keyboard.git / blame_incremental