x68k_usb/Makefile

   1 #
   2 # Makefile for PJRC Teensy
   3 #
   4
   5
   6 # Target file name (without extension).
   7 TARGET = x68k_usb_pjrc
   8
   9 # Directory common source filess exist
  10 TOP_DIR = ..
  11
  12 # Directory keyboard dependent files exist
  13 TARGET_DIR = .
  14
  15 # keyboard dependent files
  16 SRC =   main.c \
  17         keymap.c \
  18         matrix.c \
  19         led.c \
  20         x68k.c
  21
  22 CONFIG_H = config_pjrc.h
  23
  24
  25 # MCU name, you MUST set this to match the board you are using
  26 # type "make clean" after changing this, so all files will be rebuilt
  27 #MCU = at90usb162       # Teensy 1.0
  28 MCU = atmega32u4       # Teensy 2.0
  29 #MCU = at90usb646       # Teensy++ 1.0
  30 #MCU = at90usb1286      # Teensy++ 2.0
  31
  32
  33 # Processor frequency.
  34 #   Normally the first thing your program should do is set the clock prescaler,
  35 #   so your program will run at the correct speed.  You should also set this
  36 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  37 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  38 F_CPU = 16000000
  39
  40
  41 # Build Options
  42 #   *Comment out* to disable the options.
  43 #
  44 MOUSEKEY_ENABLE = yes   # Mouse keys
  45 EXTRAKEY_ENABLE = yes   # Audio control and System control
  46 NKRO_ENABLE = yes       # USB Nkey Rollover
  47
  48
  49
  50 #---------------- Programming Options --------------------------
  51 AVRDUDE = avrdude
  52 # Type: avrdude -c ? to get a full listing.
  53 AVRDUDE_PROGRAMMER = avr109
  54 AVRDUDE_PORT = /dev/ttyACM0
  55 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  56 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  57
  58 # Uncomment the following if you want avrdude's erase cycle counter.
  59 # Note that this counter needs to be initialized first using -Yn,
  60 # see avrdude manual.
  61 #AVRDUDE_ERASE_COUNTER = -y
  62
  63 # Uncomment the following if you do /not/ wish a verification to be
  64 # performed after programming the device.
  65 #AVRDUDE_NO_VERIFY = -V
  66
  67 # Increase verbosity level.  Please use this when submitting bug
  68 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  69 # to submit bug reports.
  70 #AVRDUDE_VERBOSE = -v -v
  71
  72 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  73 #AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
  74 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  75 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  76 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  77
  78 #PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  79 #PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  80 PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
  81
  82
  83
  84 include $(TOP_DIR)/protocol/pjrc.mk
  85 include $(TOP_DIR)/protocol.mk
  86 include $(TOP_DIR)/common.mk
  87 include $(TOP_DIR)/rules.mk