converter/ascii_usb/config.h

   1 /*
   2 Copyright 2014 Jun Wako <wakojun@gmail.com>
   3
   4 This program is free software: you can redistribute it and/or modify
   5 it under the terms of the GNU General Public License as published by
   6 the Free Software Foundation, either version 2 of the License, or
   7 (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 GNU General Public License for more details.
  13
  14 You should have received a copy of the GNU General Public License
  15 along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16 */
  17
  18 #ifndef CONFIG_H
  19 #define CONFIG_H
  20
  21 #define VENDOR_ID       0xFEED
  22 #define PRODUCT_ID      0x5C01
  23 #define DEVICE_VER      0x0100
  24 #define MANUFACTURER    t.m.k.
  25 #define PRODUCT         ASCII keyboard converter
  26 #define DESCRIPTION     converts Serial Console Terminal into USB keyboard
  27
  28
  29 /* matrix size */
  30 #define MATRIX_ROWS     16
  31 #define MATRIX_COLS     16
  32
  33 /* key combination for command */
  34 #define IS_COMMAND()    ( \
  35     host_get_first_key() == KC_BRK \
  36 )
  37
  38
  39 /*
  40  * Serial(USART) configuration
  41  *     asynchronous, positive logic, 19200baud, bit order: LSB first
  42  *     1-start bit, 8-data bit, odd parity, 1-stop bit
  43  */
  44 #ifdef __AVR_ATmega32U4__
  45     #define SERIAL_UART_BAUD       19200
  46     #define SERIAL_UART_DATA       UDR1
  47     #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
  48     #define SERIAL_UART_RXD_VECT   USART1_RX_vect
  49     #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
  50     #define SERIAL_UART_INIT()     do { \
  51         UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
  52         UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
  53         UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
  54         UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
  55         UCSR1C |= (1<<UPM11) | (1<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
  56         sei(); \
  57     } while(0)
  58 #else
  59     #error "USART configuration is needed."
  60 #endif
  61
  62 /* disable action features */
  63 #define NO_ACTION_LAYER
  64 #define NO_ACTION_TAPPING
  65 #define NO_ACTION_ONESHOT
  66 #define NO_ACTION_MACRO
  67 #define NO_ACTION_FUNCTION
  68
  69
  70 #endif