converter/ps2_usb/Makefile.vusb

   1 # Target file name (without extension).
   2 TARGET = ps2_usb_vusb
   3
   4 # Directory common source filess exist
   5 TOP_DIR = ../..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap.c \
  12         matrix.c \
  13         led.c
  14
  15 # Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
  16 SRC += protocol/ps2_usart.c
  17 OPT_DEFS += -DPS2_USE_USART
  18
  19 CONFIG_H = config.h
  20
  21
  22 # V-USB debug level: To use ps2_usart.c level must be 0
  23 # ps2_usart.c requires USART to receive PS/2 signal.
  24 OPT_DEFS += -DDEBUG_LEVEL=0
  25
  26
  27 # MCU name, you MUST set this to match the board you are using
  28 # type "make clean" after changing this, so all files will be rebuilt
  29 #MCU = at90usb162       # Teensy 1.0
  30 #MCU = atmega32u4       # Teensy 2.0
  31 #MCU = at90usb646       # Teensy++ 1.0
  32 #MCU = at90usb1286      # Teensy++ 2.0
  33 MCU = atmega168
  34
  35
  36 # Processor frequency.
  37 #   Normally the first thing your program should do is set the clock prescaler,
  38 #   so your program will run at the correct speed.  You should also set this
  39 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  40 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  41 F_CPU = 20000000
  42
  43
  44 # Build Options
  45 #   comment out to disable the options.
  46 #
  47 MOUSEKEY_ENABLE = yes   # Mouse keys
  48 EXTRAKEY_ENABLE = yes   # Audio control and System control
  49 #NKRO_ENABLE = yes      # USB Nkey Rollover
  50 NO_UART = yes           # UART is unavailable
  51
  52
  53
  54 #---------------- Programming Options --------------------------
  55 AVRDUDE = avrdude
  56 # Type: avrdude -c ? to get a full listing.
  57 AVRDUDE_PROGRAMMER = usbasp
  58 AVRDUDE_PORT =
  59 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  60 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  61
  62 # Uncomment the following if you want avrdude's erase cycle counter.
  63 # Note that this counter needs to be initialized first using -Yn,
  64 # see avrdude manual.
  65 #AVRDUDE_ERASE_COUNTER = -y
  66
  67 # Uncomment the following if you do /not/ wish a verification to be
  68 # performed after programming the device.
  69 #AVRDUDE_NO_VERIFY = -V
  70
  71 # Increase verbosity level.  Please use this when submitting bug
  72 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  73 # to submit bug reports.
  74 #AVRDUDE_VERBOSE = -v -v
  75
  76 #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  77 AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
  78 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  79 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  80 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  81
  82 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  83
  84
  85 # Boot Section Size in bytes
  86 #   Teensy halfKay   512
  87 #   Atmel DFU loader 4096
  88 #   LUFA bootloader  4096
  89 #   USBasp           2048
  90 OPT_DEFS += -DBOOTLOADER_SIZE=2048
  91
  92
  93 # Search Path
  94 VPATH += $(TARGET_DIR)
  95 VPATH += $(TOP_DIR)
  96
  97
  98 include $(TOP_DIR)/protocol/vusb.mk
  99 include $(TOP_DIR)/protocol.mk
 100 include $(TOP_DIR)/common.mk
 101 include $(TOP_DIR)/rules.mk