README.md

   1 TMK Keyboard Firmware Collection
   2 ================================
   3 This is a keyboard firmware with some useful features for Atmel AVR controller.
   4
   5 Source code is available here: <http://github.com/tmk/tmk_keyboard>
   6
   7
   8 Features
   9 --------
  10 These features can be used in your keyboard.
  11
  12 * Multi-layer Keymap  - Multiple keyboard layouts with layer switching
  13 * Mouse key           - Mouse control with keyboard
  14 * System Control Key  - Power Down, Sleep, Wake Up and USB Remote Wake up
  15 * Media Control Key   - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
  16 * USB NKRO            - 120 keys(+ 8 modifiers) simultaneously
  17 * PS/2 mouse support  - PS/2 mouse(TrackPoint) as composite device
  18 * Keyboard protocols  - PS/2, ADB, M0110, Sun and other old keyboard protocols
  19 * User Function       - Customizable function of key with writing code
  20 * Macro               - Very primitive at this time
  21 * Keyboard Tricks     - Oneshot modifier and modifier with tapping feature
  22 * Debug Console       - Messages for debug and interaction with firmware
  23 * Virtual DIP Switch  - Configurations stored EEPROM(Boot Magic)
  24 * Locking CapsLock    - Mechanical switch support for CapsLock
  25 * Breathing Sleep LED - Sleep indicator with charm during USB suspend
  26 * Backlight           - Control backlight levels
  27
  28
  29 Projects
  30 --------
  31 You can find some keyboard specific projects under `converter` and `keyboard` directory.
  32
  33 ### converter
  34 * [ps2_usb](converter/ps2_usb/)             - [PS/2 keyboard to USB][GH_ps2]
  35 * [adb_usb](converter/adb_usb/)             - [ADB keyboard to USB][GH_adb]
  36 * [m0110_usb](converter/m0110_usb)          - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
  37 * [terminal_usb](converter/terminal_usb/)   - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
  38 * [news_usb](converter/news_usb/)           - [Sony NEWS keyboard to USB][GH_news]
  39 * [x68k_usb](converter/x68k_usb/)           - [Sharp X68000 keyboard to USB][GH_x68k]
  40 * [sun_usb](converter/sun_usb/)             - [Sun] to USB(type4, 5 and 3?)
  41 * [pc98_usb](converter/pc98_usb/)           - [PC98] to USB
  42 * [usb_usb](converter/usb_usb/)             - USB to USB(experimental)
  43 * [ascii_usb](converter/ascii_usb/)         - ASCII(Serial console terminal) to USB
  44 * [ibm4704_usb](converter/ibm4704_usb)      - [IBM 4704 keyboard Converter][GH_ibm4704]
  45
  46 ### keyboard
  47 * [hhkb](keyboard/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
  48 * [gh60](keyboard/gh60/)                    - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
  49 * [hbkb](keyboard/hbkb/)                    - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
  50 * [hid_liber](keyboard/hid_liber/)          - [HID liberation][HID_liber] controller (by alaricljs)
  51 * [phantom](keyboard/phantom/)              - [Phantom] keyboard (by Tranquilite)
  52 * [IIgs_Standard](keyboard/IIgs/)           - Apple [IIGS] keyboard mod(by JeffreySung)
  53 * [macway](keyboard/macway/)                - [Compact keyboard mod][GH_macway] [retired]
  54 * [KMAC](keyboard/kmac/)                    - Korean custom keyboard
  55 * [Lightsaber](keyboard/lightsaber/)        - Korean custom keyboard
  56
  57 [GH_macway]:    http://geekhack.org/showwiki.php?title=Island:11930
  58 [GH_hhkb]:      http://geekhack.org/showwiki.php?title=Island:12047
  59 [GH_ps2]:       http://geekhack.org/showwiki.php?title=Island:14618
  60 [GH_adb]:       http://geekhack.org/showwiki.php?title=Island:14290
  61 [GH_hhkb_bt]:   http://geekhack.org/showwiki.php?title=Island:20851
  62 [GH_m0110]:     http://geekhack.org/showwiki.php?title=Island:24965
  63 [GH_news]:      http://geekhack.org/showwiki.php?title=Island:25759
  64 [GH_terminal]:  http://geekhack.org/showwiki.php?title=Island:27272
  65 [GH_x68k]:      http://geekhack.org/showwiki.php?title=Island:29060
  66 [GH_hbkb]:      http://geekhack.org/showwiki.php?title=Island:29483
  67 [GH_ibm4704]:   http://geekhack.org/index.php?topic=54706.0
  68 [HID_liber]:    http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
  69 [Phantom]:      http://geekhack.org/index.php?topic=26742
  70 [GH60]:         http://geekhack.org/index.php?topic=34959
  71 [GH60_proto]:   http://geekhack.org/index.php?topic=37570.0
  72 [PC98]:         http://en.wikipedia.org/wiki/NEC_PC-9801
  73 [Sun]:          http://en.wikipedia.org/wiki/Sun-3
  74 [IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
  75
  76
  77
  78 License
  79 -------
  80 **GPLv2** or later. Some protocol files are under **Modified BSD License**.
  81 LUFA, PJRC and V-USB stack have their own license respectively.
  82
  83
  84
  85 Build Firmware and Program Controller
  86 -------------------------------------
  87 See [doc/build.md](doc/build.md).
  88
  89
  90
  91 Change your keymap
  92 ------------------
  93 See [doc/keymap.md](doc/keymap.md).
  94
  95
  96
  97 Magic Commands
  98 --------------
  99 To see help press `Magic` + `H`.
 100
 101  `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
 102
 103 Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
 104
 105     ----- Command Help -----
 106     c:      enter console mode
 107     d:      toggle debug enable
 108     x:      toggle matrix debug
 109     k:      toggle keyboard debug
 110     m:      toggle mouse debug
 111     v:      print device version & info
 112     t:      print timer count
 113     s:      print status
 114     e:      print eeprom config
 115     n:      toggle NKRO
 116     0/F10:  switch to Layer0
 117     1/F1:   switch to Layer1
 118     2/F2:   switch to Layer2
 119     3/F3:   switch to Layer3
 120     4/F4:   switch to Layer4
 121     PScr:   power down/remote wake-up
 122     Caps:   Lock Keyboard(Child Proof)
 123     Paus:   jump to bootloader
 124
 125 **TBD**
 126
 127 ### Boot Magic Configuration - Virtual DIP Switch
 128 Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
 129 Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
 130
 131 To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h).
 132
 133 #### General
 134 - Skip reading EEPROM to start with default configuration(`ESC`)
 135 - Clear configuration stored in EEPROM to reset configuration(`Backspace`)
 136
 137 #### Bootloader
 138 - Kick up Bootloader(`B`)
 139
 140 #### Debug
 141 - Debug enable(`D`)
 142 - Debug matrix enable(`D`+`X`)
 143 - Debug keyboard enable(`D`+`K`)
 144 - Debug mouse enable(`D`+`M`)
 145
 146 #### Keymap
 147 - Swap Control and CapsLock(`Left Control`)
 148 - Change CapsLock to Control(`Caps Lock`)
 149 - Swap LeftAlt and Gui(`Left Alt`)
 150 - Swap RightAlt and Gui(`Right Alt`)
 151 - Disable Gui(`Left Gui`)
 152 - Swap Grave and Escape(`Grave`)
 153 - Swap BackSlash and BackSpace(`Back Slash`)
 154 - Enable NKRO on boot(`N`)
 155
 156 #### Default Layer
 157 - Set Default Layer to 0(`0`)
 158 - Set Default Layer to 1(`1`)
 159 - Set Default Layer to 2(`2`)
 160 - Set Default Layer to 3(`3`)
 161 - Set Default Layer to 4(`4`)
 162 - Set Default Layer to 5(`5`)
 163 - Set Default Layer to 6(`6`)
 164 - Set Default Layer to 7(`7`)
 165
 166 #### Caution
 167 Unintentional use of this feature will cause user confusion.
 168
 169 TODO: Magic key combination to avoid unintentional press during plug in
 170
 171 **TBD**
 172
 173
 174 Mechanical Locking support
 175 --------------------------
 176 This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state.
 177
 178     #define LOCKING_SUPPORT_ENABLE
 179     #define LOCKING_RESYNC_ENABLE
 180
 181
 182 Start Your Own Project
 183 -----------------------
 184 **TBD**
 185 ### Config.h Options
 186 #### 1. USB vendor/product ID and device description
 187     #define VENDOR_ID       0xFEED
 188     #define PRODUCT_ID      0xBEEF
 189     #define MANUFACTURER    t.m.k.
 190     #define PRODUCT         Macway mod
 191     #define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
 192
 193 #### 2. Keyboard matrix configuration
 194     #define MATRIX_ROWS 8
 195     #define MATRIX_COLS 8
 196     #define MATRIX_HAS_GHOST
 197
 198
 199
 200 Architecture
 201 ------------
 202     Architecture Diagram
 203                                +---------------+---------------+-------------+
 204                                |    Host       |   Keyboard    | Matrix, LED |
 205        ___________             |-----------+-+ +-------------+ | +-----------|
 206       /          /| Keys/Mouse | Protocol  |d| | Action      | | | Protocol  |
 207      /__________/ |<-----------|  LUFA     |r| |  Layer, Tap | | |  Matrix   |
 208      |.--------.| |   LED      |  V-USB    |i| |-------------| | |  PS/2,IBM |             __________________
 209      ||        || |----------->|  PJRC     |v| | Keymap      | | |  ADB,M0110|  Keys      / /_/_/_/_/_/_/_/ /|
 210      ||  Host  || |  Console   |  iWRAP(BT)|e| | Mousekey    | | |  SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
 211      ||________||/.<-----------|  UART     |r| | Report      | | |  X68K/PC98| Control  / /_/_/_/_/_/_/_/ / /
 212      `_========_'/|            |---------------------------------------------|-------->/___ /_______/ ___/ /
 213      |_o______o_|/             | Sendchar, Print, Debug, Command, ...        |         |_________________|/
 214                                +---------------------------------------------+              Keyboard
 215
 216
 217
 218 Debugging
 219 --------
 220 Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
 221
 222 You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`.
 223
 224
 225
 226 Files and Directories
 227 -------------------
 228 ### Top
 229 * common/       - common codes
 230 * protocol/     - keyboard protocol support
 231 * keyboard/     - keyboard projects
 232 * converter/    - protocol converter projects
 233 * doc/          - documents
 234 * common.mk     - Makefile for common
 235 * protocol.mk    - Makefile for protocol
 236 * rules.mk      - Makefile for build rules
 237
 238 ### Common
 239 * host.h
 240 * host_driver.h
 241 * keyboard.h
 242 * command.h
 243 * keymap.h
 244 * action.h
 245 * keycode.h
 246 * matrix.h
 247 * led.h
 248 * mousekey.h
 249 * report.h
 250 * debug.h
 251 * print.h
 252 * bootloader.h
 253 * sendchar.h
 254 * timer.h
 255 * util.h
 256
 257 ### Keyboard Protocols
 258 * lufa/     - LUFA USB stack
 259 * pjrc/     - PJRC USB stack
 260 * vusb/     - Objective Development V-USB
 261 * iwrap/    - Bluetooth HID for Bluegiga iWRAP
 262 * ps2.c     - PS/2 protocol
 263 * adb.c     - Apple Desktop Bus protocol
 264 * m0110.c   - Macintosh 128K/512K/Plus keyboard protocol
 265 * news.c    - Sony NEWS keyboard protocol
 266 * x68k.c    - Sharp X68000 keyboard protocol
 267 * serial_soft.c - Asynchronous Serial protocol implemented by software
 268
 269
 270
 271 Coding Style
 272 -------------
 273 - Doesn't use Tab to indent, use 4-spaces instead.
 274
 275
 276
 277 Other Keyboard Firmware Projects
 278 ------------------
 279 See [doc/other_projects.md](doc/other_projects.md).