keyboard/hhkb/Makefile

   1 #----------------------------------------------------------------------------
   2 # On command line:
   3 #
   4 # make all = Make software.
   5 #
   6 # make clean = Clean out built project files.
   7 #
   8 # make coff = Convert ELF to AVR COFF.
   9 #
  10 # make extcoff = Convert ELF to AVR Extended COFF.
  11 #
  12 # make program = Download the hex file to the device.
  13 #                Please customize your programmer settings(PROGRAM_CMD)
  14 #
  15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
  16 #               (must have teensy_loader_cli installed).
  17 #
  18 # make dfu = Download the hex file to the device, using dfu-programmer (must
  19 #            have dfu-programmer installed).
  20 #
  21 # make flip = Download the hex file to the device, using Atmel FLIP (must
  22 #             have Atmel FLIP installed).
  23 #
  24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  25 #               (must have dfu-programmer installed).
  26 #
  27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  28 #                (must have Atmel FLIP installed).
  29 #
  30 # make debug = Start either simulavr or avarice as specified for debugging,
  31 #              with avr-gdb or avr-insight as the front end for debugging.
  32 #
  33 # make filename.s = Just compile filename.c into the assembler code only.
  34 #
  35 # make filename.i = Create a preprocessed source file for use in submitting
  36 #                   bug reports to the GCC project.
  37 #
  38 # To rebuild project do "make clean" then "make all".
  39 #----------------------------------------------------------------------------
  40
  41 # Target file name (without extension).
  42 TARGET = hhkb_lufa
  43
  44 # Directory common source filess exist
  45 TMK_DIR = ../../tmk_core
  46
  47 # Directory keyboard dependent files exist
  48 TARGET_DIR = .
  49
  50
  51 # List C source files here. (C dependencies are automatically generated.)
  52 SRC +=  matrix.c \
  53         led.c
  54
  55 CONFIG_H = config.h
  56
  57
  58 # MCU name
  59 # PJRC Teensy++ 2.0
  60 #MCU = at90usb1286
  61 # TMK Alt Controller or PJRC Teensy 2.0
  62 MCU = atmega32u4
  63
  64 # Processor frequency.
  65 #     This will define a symbol, F_CPU, in all source code files equal to the
  66 #     processor frequency in Hz. You can then use this symbol in your source code to
  67 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  68 #     automatically to create a 32-bit value in your source code.
  69 #
  70 #     This will be an integer division of F_USB below, as it is sourced by
  71 #     F_USB after it has run through any CPU prescalers. Note that this value
  72 #     does not *change* the processor frequency - it should merely be updated to
  73 #     reflect the processor speed set externally so that the code can use accurate
  74 #     software delays.
  75 F_CPU = 16000000
  76
  77
  78 #
  79 # LUFA specific
  80 #
  81 # Target architecture (see library "Board Types" documentation).
  82 ARCH = AVR8
  83
  84 # Input clock frequency.
  85 #     This will define a symbol, F_USB, in all source code files equal to the
  86 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  87 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  88 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  89 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  90 #     at the end, this will be done automatically to create a 32-bit value in your
  91 #     source code.
  92 #
  93 #     If no clock division is performed on the input clock inside the AVR (via the
  94 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  95 F_USB = $(F_CPU)
  96
  97 # Interrupt driven control endpoint task
  98 #OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  99
 100
 101 # Boot Section Size in *bytes*
 102 #   Teensy halfKay   512
 103 #   Teensy++ halfKay 1024
 104 #   Atmel DFU loader 4096       (TMK Alt Controller)
 105 #   LUFA bootloader  4096
 106 #   USBaspLoader     2048
 107 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 108
 109
 110 # Build Options
 111 #   comment out to disable the options.
 112 #
 113 BOOTMAGIC_ENABLE = yes          # Virtual DIP switch configuration
 114 MOUSEKEY_ENABLE = yes           # Mouse keys
 115 EXTRAKEY_ENABLE = yes           # Audio control and System control
 116 CONSOLE_ENABLE = yes            # Console for debug
 117 COMMAND_ENABLE = yes            # Commands for debug and configuration
 118 NKRO_ENABLE = yes               # USB Nkey Rollover
 119 #KEYMAP_SECTION_ENABLE = yes    # fixed address keymap for keymap editor
 120 #HHKB_JP = yes                  # HHKB JP support
 121 #UNIMAP_ENABLE = yes
 122 #ACTIONMAP_ENABLE = yes         # Use 16bit actionmap instead of 8bit keymap
 123 #KEYMAP_SECTION_ENABLE = yes    # fixed address keymap for keymap editor
 124
 125 #OPT_DEFS += -DNO_ACTION_TAPPING
 126 #OPT_DEFS += -DNO_ACTION_LAYER
 127 #OPT_DEFS += -DNO_ACTION_MACRO
 128
 129
 130 #
 131 # Keymap file
 132 #
 133 ifdef UNIMAP_ENABLE
 134     KEYMAP_FILE = unimap
 135 else
 136     ifdef ACTIONMAP_ENABLE
 137         KEYMAP_FILE = actionmap
 138     else
 139         KEYMAP_FILE = keymap
 140     endif
 141 endif
 142 ifdef KEYMAP
 143     SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
 144 else
 145     ifdef HHKB_JP
 146         SRC := $(KEYMAP_FILE)_jp.c $(SRC)
 147     else
 148         SRC := $(KEYMAP_FILE)_hhkb.c $(SRC)
 149     endif
 150 endif
 151
 152
 153 ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
 154     OPT_DEFS += -DHHKB_JP
 155 endif
 156
 157
 158 # Search Path
 159 VPATH += $(TARGET_DIR)
 160 VPATH += $(TMK_DIR)
 161
 162 include $(TMK_DIR)/protocol/lufa.mk
 163 include $(TMK_DIR)/common.mk
 164 include $(TMK_DIR)/rules.mk
 165
 166 debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 167 debug-on: all
 168
 169 debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
 170 debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
 171 debug-off: all