README.md

   1 TMK Keyboard Firmware Collection
   2 ================================
   3 This is a keyboard firmware with some useful features for Atmel AVR controller.
   4
   5 Source code is available here: <http://github.com/tmk/tmk_keyboard>
   6
   7
   8 Features
   9 --------
  10 These features can be used in your keyboard.
  11
  12 * Multi-layer Keymap  - Multiple keyboard layouts with layer switching
  13 * Mouse key           - Mouse control with keyboard
  14 * System Control Key  - Power Down, Sleep, Wake Up and USB Remote Wake up
  15 * Media Control Key   - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
  16 * USB NKRO            - 120 keys(+ 8 modifiers) simultaneously
  17 * PS/2 mouse support  - PS/2 mouse(TrackPoint) as composite device
  18 * Keyboard protocols  - PS/2, ADB, M0110, Sun and other old keyboard protocols
  19 * User Function       - Customizable function of key with writing code
  20 * Macro               - Very primitive at this time
  21 * Keyboard Tricks     - Oneshot modifier and modifier with tapping feature
  22 * Debug Console       - Messages for debug and interaction with firmware
  23 * Virtual DIP Switch  - Configurations stored EEPROM(Boot Magic)
  24 * Locking CapsLock    - Mechanical switch support for CapsLock
  25 * Breathing Sleep LED - Sleep indicator with charm during USB suspend
  26 * Backlight           - Control backlight levels
  27
  28
  29 Projects
  30 --------
  31 You can find some keyboard specific projects under `converter` and `keyboard` directory.
  32
  33 ### converter
  34 * [ps2_usb](converter/ps2_usb/)             - [PS/2 keyboard to USB][GH_ps2]
  35 * [adb_usb](converter/adb_usb/)             - [ADB keyboard to USB][GH_adb]
  36 * [m0110_usb](converter/m0110_usb)          - [Machintosh 128K/512K/Plus keyboard to USB][GH_m0110]
  37 * [terminal_usb](converter/terminal_usb/)   - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
  38 * [news_usb](converter/news_usb/)           - [Sony NEWS keyboard to USB][GH_news]
  39 * [x68k_usb](converter/x68k_usb/)           - [Sharp X68000 keyboard to USB][GH_x68k]
  40 * [sun_usb](converter/sun_usb/)             - [Sun] to USB(type4, 5 and 3?)
  41 * [pc98_usb](converter/pc98_usb/)           - [PC98] to USB
  42 * [usb_usb](converter/usb_usb/)             - USB to USB(experimental)
  43
  44 ### keyboard
  45 * [hhkb](keyboard/hhkb/)                    - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
  46 * [gh60](keyboard/gh60/)                    - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
  47 * [hbkb](keyboard/hbkb/)                    - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
  48 * [hid_liber](keyboard/hid_liber/)          - [HID liberation][HID_liber] controller (by alaricljs)
  49 * [phantom](keyboard/phantom/)              - [Phantom] keyboard (by Tranquilite)
  50 * [IIgs_Standard](keyboard/IIgs/)           - Apple [IIGS] keyboard mod(by JeffreySung)
  51 * [macway](keyboard/macway/)                - [Compact keyboard mod][GH_macway] [retired]
  52 * [KMAC](keyboard/kmac/)                    - Korean custom keyboard
  53
  54 [GH_macway]:    http://geekhack.org/showwiki.php?title=Island:11930
  55 [GH_hhkb]:      http://geekhack.org/showwiki.php?title=Island:12047
  56 [GH_ps2]:       http://geekhack.org/showwiki.php?title=Island:14618
  57 [GH_adb]:       http://geekhack.org/showwiki.php?title=Island:14290
  58 [GH_hhkb_bt]:   http://geekhack.org/showwiki.php?title=Island:20851
  59 [GH_m0110]:     http://geekhack.org/showwiki.php?title=Island:24965
  60 [GH_news]:      http://geekhack.org/showwiki.php?title=Island:25759
  61 [GH_terminal]:  http://geekhack.org/showwiki.php?title=Island:27272
  62 [GH_x68k]:      http://geekhack.org/showwiki.php?title=Island:29060
  63 [GH_hbkb]:      http://geekhack.org/showwiki.php?title=Island:29483
  64 [HID_liber]:    http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
  65 [Phantom]:      http://geekhack.org/index.php?topic=26742
  66 [GH60]:         http://geekhack.org/index.php?topic=34959
  67 [GH60_proto]:   http://geekhack.org/index.php?topic=37570.0
  68 [PC98]:         http://en.wikipedia.org/wiki/NEC_PC-9801
  69 [Sun]:          http://en.wikipedia.org/wiki/Sun-3
  70 [IIGS]:         http://en.wikipedia.org/wiki/Apple_IIGS
  71
  72
  73
  74 License
  75 -------
  76 **GPLv2** or later. Some protocol files are under **Modified BSD License**.
  77 LUFA, PJRC and V-USB stack have their own license respectively.
  78
  79
  80
  81 Build Firmware and Program Controller
  82 -------------------------------------
  83 See [doc/build.md](doc/build.md).
  84
  85
  86
  87 Change your keymap
  88 ------------------
  89 See [doc/keymap.md](doc/keymap.md).
  90
  91
  92
  93 Magic Comannds
  94 --------------
  95 To see help press `Magic` + `H`.
  96
  97  `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
  98
  99 Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
 100
 101     ----- Command Help -----
 102     c:      enter console mode
 103     d:      toggle debug enable
 104     x:      toggle matrix debug
 105     k:      toggle keyboard debug
 106     m:      toggle mouse debug
 107     v:      print device version & info
 108     t:      print timer count
 109     s:      print status
 110     e:      print eeprom config
 111     n:      toggle NKRO
 112     0/F10:  switch to Layer0
 113     1/F1:   switch to Layer1
 114     2/F2:   switch to Layer2
 115     3/F3:   switch to Layer3
 116     4/F4:   switch to Layer4
 117     PScr:   power down/remote wake-up
 118     Caps:   Lock Keyboard(Child Proof)
 119     Paus:   jump to bootloader
 120
 121 **TBD**
 122
 123 ### Boot Magic Configuration - Virtual DIP Switch
 124 Boot Magic are executed during boot up time. Press Magic key below then pulgin keyboard cable.
 125 Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
 126
 127 To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h).
 128
 129 #### General
 130 - Skip reading EEPROM to start with default configuration(`ESC`)
 131 - Clear configuration stored in EEPROM to reset configuration(`Backspace`)
 132
 133 #### Bootloader
 134 - Kick up Bootloader(`B`)
 135
 136 #### Debug
 137 - Debug enable(`D`)
 138 - Debug matrix enable(`D`+`X`)
 139 - Debug keyboard enable(`D`+`K`)
 140 - Debug mouse enable(`D`+`M`)
 141
 142 #### Keymap
 143 - Swap Control and CapsLock(`Left Control`)
 144 - Change CapsLock to Control(`Casp Lock`)
 145 - Swap LeftAlt and Gui(`Left Alt`)
 146 - Swap RightAlt and Gui(`Right Alt`)
 147 - Disable Gui(`Left Gui`)
 148 - Swap Grave and Escape(`Grave`)
 149 - Swap BackSlash and BackSpace(`Back Slash`)
 150
 151 #### Default Layer
 152 - Set Default Layer to 0(`0`)
 153 - Set Default Layer to 1(`1`)
 154 - Set Default Layer to 2(`2`)
 155 - Set Default Layer to 3(`3`)
 156 - Set Default Layer to 4(`4`)
 157 - Set Default Layer to 5(`5`)
 158 - Set Default Layer to 6(`6`)
 159 - Set Default Layer to 7(`7`)
 160
 161 #### Caution
 162 Unintentional use of this feature will cause user confusion.
 163
 164 TODO: Magic key combination to avoid unintentional press during plug in
 165
 166 **TBD**
 167
 168
 169 Mechanical Locking support
 170 --------------------------
 171 This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state.
 172
 173     #define LOCKING_SUPPORT_ENABLE
 174     #define LOCKING_RESYNC_ENABLE
 175
 176
 177 Start Your Own Project
 178 -----------------------
 179 **TBD**
 180 ### Config.h Options
 181 #### 1. USB vendor/product ID and device description
 182     #define VENDOR_ID       0xFEED
 183     #define PRODUCT_ID      0xBEEF
 184     #define MANUFACTURER    t.m.k.
 185     #define PRODUCT         Macway mod
 186     #define DESCRIPTION     t.m.k. keyboard firmware for Macway mod
 187
 188 #### 2. Keyboard matrix configuration
 189     #define MATRIX_ROWS 8
 190     #define MATRIX_COLS 8
 191     #define MATRIX_HAS_GHOST
 192
 193
 194
 195 Architecture
 196 ------------
 197     Architecture Diagram
 198                                +---------------+---------------+-------------+
 199                                |    Host       |   Keyboard    | Matrix, LED |
 200        ___________             |-----------+-+ +-------------+ | +-----------|
 201       /          /| Keys/Mouse | Protocol  |d| | Action      | | | Protocol  |
 202      /__________/ |<-----------|  LUFA     |r| |  Layer, Tap | | |  Matrix   |
 203      |.--------.| |   LED      |  V-USB    |i| |-------------| | |  PS/2,IBM |             __________________
 204      ||        || |----------->|  PJRC     |v| | Keymap      | | |  ADB,M0110|  Keys      / /_/_/_/_/_/_/_/ /|
 205      ||  Host  || |  Console   |  iWRAP(BT)|e| | Mousekey    | | |  SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
 206      ||________||/.<-----------|  UART     |r| | Report      | | |  X68K/PC98| Control  / /_/_/_/_/_/_/_/ / /
 207      `_========_'/|            |---------------------------------------------|-------->/___ /_______/ ___/ /
 208      |_o______o_|/             | Sendchar, Print, Debug, Command, ...        |         |_________________|/
 209                                +---------------------------------------------+              Keyboard
 210
 211
 212
 213 Debuging
 214 --------
 215 Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
 216
 217 You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`.
 218
 219
 220
 221 Files and Directories
 222 -------------------
 223 ### Top
 224 * common/       - common codes
 225 * protocol/     - keyboard protocol support
 226 * keyboard/     - keyboard projects
 227 * converter/    - protocol converter projects
 228 * doc/          - documents
 229 * common.mk     - Makefile for common
 230 * protoco.mk    - Makefile for protocol
 231 * rules.mk      - Makefile for build rules
 232
 233 ### Common
 234 * host.h
 235 * host_driver.h
 236 * keyboard.h
 237 * command.h
 238 * keymap.h
 239 * action.h
 240 * keycode.h
 241 * matrix.h
 242 * led.h
 243 * mousekey.h
 244 * report.h
 245 * debug.h
 246 * print.h
 247 * bootloader.h
 248 * sendchar.h
 249 * timer.h
 250 * util.h
 251
 252 ### Keyboard Protocols
 253 * lufa/     - LUFA USB stack
 254 * pjrc/     - PJRC USB stack
 255 * vusb/     - Objective Development V-USB
 256 * iwrap/    - Bluetooth HID for Bluegiga iWRAP
 257 * ps2.c     - PS/2 protocol
 258 * adb.c     - Apple Desktop Bus protocol
 259 * m0110.c   - Macintosh 128K/512K/Plus keyboard protocol
 260 * news.c    - Sony NEWS keyboard protocol
 261 * x68k.c    - Sharp X68000 keyboard protocol
 262 * serial_soft.c - Asynchronous Serial protocol implemented by software
 263
 264
 265
 266 Conding Style
 267 -------------
 268 - Doesn't use Tab to indent, use 4-spaces instead.
 269
 270
 271
 272 Other Keyboard Firmware Projects
 273 ------------------
 274 See [doc/other_projects.md](doc/other_projects.md).