keyboard/hhkb/Makefile.vusb

   1 #
   2 # Makefile for V-USB
   3 #
   4
   5
   6 # Target file name (without extension).
   7 TARGET = hhkb_vusb
   8
   9 # Directory common source filess exist
  10 TOP_DIR = ../..
  11
  12 # Directory keyboard dependent files exist
  13 TARGET_DIR = .
  14
  15 # keyboard dependent files
  16 SRC =   \
  17         keymap.c \
  18         matrix.c \
  19         led.c
  20
  21 CONFIG_H = config_vusb.h
  22
  23
  24 # V-USB debug level: To use ps2_usart.c level must be 0
  25 # ps2_usart.c requires USART to receive PS/2 signal.
  26 OPT_DEFS = -DDEBUG_LEVEL=0
  27
  28
  29 # MCU name, you MUST set this to match the board you are using
  30 # type "make clean" after changing this, so all files will be rebuilt
  31 MCU = atmega328p
  32 # avrdude doesn't know atmega168p
  33 AVRDUDE_MCU = $(MCU)
  34
  35
  36 # Processor frequency.
  37 #   Normally the first thing your program should do is set the clock prescaler,
  38 #   so your program will run at the correct speed.  You should also set this
  39 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  40 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  41 F_CPU = 12000000
  42
  43
  44 # Build Options
  45 #   comment out to disable the options.
  46 #
  47 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
  48 MOUSEKEY_ENABLE = yes   # Mouse keys
  49 EXTRAKEY_ENABLE = yes   # Audio control and System control
  50 CONSOLE_ENABLE = yes    # Console for debug
  51 COMMAND_ENABLE = yes    # Commands for debug and configuration
  52 #NKRO_ENABLE = yes      # USB Nkey Rollover
  53
  54
  55
  56 #---------------- Programming Options --------------------------
  57 AVRDUDE = avrdude
  58 # Type: avrdude -c ? to get a full listing.
  59 AVRDUDE_PROGRAMMER = usbasp
  60 AVRDUDE_PORT =
  61 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  62 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  63
  64 # Uncomment the following if you want avrdude's erase cycle counter.
  65 # Note that this counter needs to be initialized first using -Yn,
  66 # see avrdude manual.
  67 #AVRDUDE_ERASE_COUNTER = -y
  68
  69 # Uncomment the following if you do /not/ wish a verification to be
  70 # performed after programming the device.
  71 #AVRDUDE_NO_VERIFY = -V
  72
  73 # Increase verbosity level.  Please use this when submitting bug
  74 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  75 # to submit bug reports.
  76 #AVRDUDE_VERBOSE = -v -v
  77
  78 #AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  79 AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
  80 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  81 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  82 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  83
  84 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  85
  86
  87
  88 # Search Path
  89 VPATH += $(TARGET_DIR)
  90 VPATH += $(TOP_DIR)
  91
  92 include $(TOP_DIR)/protocol/vusb.mk
  93 include $(TOP_DIR)/common.mk
  94 include $(TOP_DIR)/rules.mk
  95
  96 debug-on: EXTRAFLAGS += -DDEBUG
  97 debug-on: all