protocol/lufa/LUFA-git/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2014.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaims all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *
  33  *  Main source file for the RNDISEthernet demo. This file contains the main tasks of the demo and
  34  *  is responsible for the initial application hardware configuration.
  35  */
  36
  37 #include "RNDISEthernet.h"
  38
  39 /** Main program entry point. This routine configures the hardware required by the application, then
  40  *  enters a loop to run the application tasks in sequence.
  41  */
  42 int main(void)
  43 {
  44         SetupHardware();
  45
  46         /* Webserver Initialization */
  47         TCP_Init();
  48         Webserver_Init();
  49
  50         LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
  51         GlobalInterruptEnable();
  52
  53         for (;;)
  54         {
  55                 Ethernet_Task();
  56                 TCP_Task();
  57                 RNDIS_Task();
  58                 USB_USBTask();
  59         }
  60 }
  61
  62 /** Configures the board hardware and chip peripherals for the demo's functionality. */
  63 void SetupHardware(void)
  64 {
  65 #if (ARCH == ARCH_AVR8)
  66         /* Disable watchdog if enabled by bootloader/fuses */
  67         MCUSR &= ~(1 << WDRF);
  68         wdt_disable();
  69
  70         /* Disable clock division */
  71         clock_prescale_set(clock_div_1);
  72 #elif (ARCH == ARCH_XMEGA)
  73         /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
  74         XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
  75         XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
  76
  77         /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
  78         XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
  79         XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
  80
  81         PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
  82 #endif
  83
  84         /* Hardware Initialization */
  85         LEDs_Init();
  86         Serial_Init(9600, false);
  87         USB_Init();
  88
  89         /* Create a stdio stream for the serial port for stdin and stdout */
  90         Serial_CreateStream(NULL);
  91 }
  92
  93 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
  94  *  starts the library USB task to begin the enumeration and USB management process.
  95  */
  96 void EVENT_USB_Device_Connect(void)
  97 {
  98         /* Indicate USB enumerating */
  99         LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
 100 }
 101
 102 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
 103  *  the status LEDs and stops all the relevant tasks.
 104  */
 105 void EVENT_USB_Device_Disconnect(void)
 106 {
 107         /* Indicate USB not ready */
 108         LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 109 }
 110
 111 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
 112  *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
 113  */
 114 void EVENT_USB_Device_ConfigurationChanged(void)
 115 {
 116         bool ConfigSuccess = true;
 117
 118         /* Setup RNDIS Data Endpoints */
 119         ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
 120         ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
 121         ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
 122
 123         /* Indicate endpoint configuration success or failure */
 124         LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
 125 }
 126
 127 /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
 128  *  the device from the USB host before passing along unhandled control requests to the library for processing
 129  *  internally.
 130  */
 131 void EVENT_USB_Device_ControlRequest(void)
 132 {
 133         /* Process RNDIS class commands */
 134         switch (USB_ControlRequest.bRequest)
 135         {
 136                 case RNDIS_REQ_SendEncapsulatedCommand:
 137                         if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
 138                         {
 139                                 Endpoint_ClearSETUP();
 140
 141                                 /* Read in the RNDIS message into the message buffer */
 142                                 Endpoint_Read_Control_Stream_LE(RNDISMessageBuffer, USB_ControlRequest.wLength);
 143                                 Endpoint_ClearIN();
 144
 145                                 /* Process the RNDIS message */
 146                                 ProcessRNDISControlMessage();
 147                         }
 148
 149                         break;
 150                 case RNDIS_REQ_GetEncapsulatedResponse:
 151                         if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
 152                         {
 153                                 /* Check if a response to the last message is ready */
 154                                 if (!(MessageHeader->MessageLength))
 155                                 {
 156                                         /* Set the response to a single 0x00 byte to indicate that no response is ready */
 157                                         RNDISMessageBuffer[0] = 0;
 158                                         MessageHeader->MessageLength = 1;
 159                                 }
 160
 161                                 Endpoint_ClearSETUP();
 162
 163                                 /* Write the message response data to the endpoint */
 164                                 Endpoint_Write_Control_Stream_LE(RNDISMessageBuffer, MessageHeader->MessageLength);
 165                                 Endpoint_ClearOUT();
 166
 167                                 /* Reset the message header once again after transmission */
 168                                 MessageHeader->MessageLength = 0;
 169                         }
 170
 171                         break;
 172         }
 173 }
 174
 175 /** Task to manage the sending and receiving of encapsulated RNDIS data and notifications. This removes the RNDIS
 176  *  wrapper from received Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
 177  *  to a frame in the FrameOUT global before sending the buffer contents to the host.
 178  */
 179 void RNDIS_Task(void)
 180 {
 181         /* Select the notification endpoint */
 182         Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPADDR);
 183
 184         /* Check if a message response is ready for the host */
 185         if (Endpoint_IsINReady() && ResponseReady)
 186         {
 187                 USB_Request_Header_t Notification = (USB_Request_Header_t)
 188                         {
 189                                 .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
 190                                 .bRequest      = RNDIS_NOTIF_ResponseAvailable,
 191                                 .wValue        = 0,
 192                                 .wIndex        = 0,
 193                                 .wLength       = 0,
 194                         };
 195
 196                 /* Indicate that a message response is ready for the host */
 197                 Endpoint_Write_Stream_LE(&Notification, sizeof(Notification), NULL);
 198
 199                 /* Finalize the stream transfer to send the last packet */
 200                 Endpoint_ClearIN();
 201
 202                 /* Indicate a response is no longer ready */
 203                 ResponseReady = false;
 204         }
 205
 206         /* Don't process the data endpoints until the system is in the data initialized state, and the buffer is free */
 207         if ((CurrRNDISState == RNDIS_Data_Initialized) && !(MessageHeader->MessageLength))
 208         {
 209                 /* Create a new packet header for reading/writing */
 210                 RNDIS_Packet_Message_t RNDISPacketHeader;
 211
 212                 /* Select the data OUT endpoint */
 213                 Endpoint_SelectEndpoint(CDC_RX_EPADDR);
 214
 215                 /* Check if the data OUT endpoint contains data, and that the IN buffer is empty */
 216                 if (Endpoint_IsOUTReceived() && !(FrameIN.FrameLength))
 217                 {
 218                         /* Read in the packet message header */
 219                         Endpoint_Read_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
 220
 221                         /* Stall the request if the data is too large */
 222                         if (RNDISPacketHeader.DataLength > ETHERNET_FRAME_SIZE_MAX)
 223                         {
 224                                 Endpoint_StallTransaction();
 225                                 return;
 226                         }
 227
 228                         /* Read in the Ethernet frame into the buffer */
 229                         Endpoint_Read_Stream_LE(FrameIN.FrameData, RNDISPacketHeader.DataLength, NULL);
 230
 231                         /* Finalize the stream transfer to send the last packet */
 232                         Endpoint_ClearOUT();
 233
 234                         /* Store the size of the Ethernet frame */
 235                         FrameIN.FrameLength = RNDISPacketHeader.DataLength;
 236                 }
 237
 238                 /* Select the data IN endpoint */
 239                 Endpoint_SelectEndpoint(CDC_TX_EPADDR);
 240
 241                 /* Check if the data IN endpoint is ready for more data, and that the IN buffer is full */
 242                 if (Endpoint_IsINReady() && FrameOUT.FrameLength)
 243                 {
 244                         /* Clear the packet header with all 0s so that the relevant fields can be filled */
 245                         memset(&RNDISPacketHeader, 0, sizeof(RNDIS_Packet_Message_t));
 246
 247                         /* Construct the required packet header fields in the buffer */
 248                         RNDISPacketHeader.MessageType   = REMOTE_NDIS_PACKET_MSG;
 249                         RNDISPacketHeader.MessageLength = (sizeof(RNDIS_Packet_Message_t) + FrameOUT.FrameLength);
 250                         RNDISPacketHeader.DataOffset    = (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t));
 251                         RNDISPacketHeader.DataLength    = FrameOUT.FrameLength;
 252
 253                         /* Send the packet header to the host */
 254                         Endpoint_Write_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
 255
 256                         /* Send the Ethernet frame data to the host */
 257                         Endpoint_Write_Stream_LE(FrameOUT.FrameData, RNDISPacketHeader.DataLength, NULL);
 258
 259                         /* Finalize the stream transfer to send the last packet */
 260                         Endpoint_ClearIN();
 261
 262                         /* Indicate Ethernet OUT buffer no longer full */
 263                         FrameOUT.FrameLength = 0;
 264                 }
 265         }
 266 }
 267
 268 /** Ethernet frame processing task. This task checks to see if a frame has been received, and if so hands off the processing
 269  *  of the frame to the Ethernet processing routines.
 270  */
 271 void Ethernet_Task(void)
 272 {
 273         /* Task for Ethernet processing. Incoming ethernet frames are loaded into the FrameIN structure, and
 274            outgoing frames should be loaded into the FrameOUT structure. Both structures can only hold a single
 275            Ethernet frame at a time, so the FrameInBuffer bool is used to indicate when the buffers contain data. */
 276
 277         /* Device must be connected and configured for the task to run */
 278         if (USB_DeviceState != DEVICE_STATE_Configured)
 279           return;
 280
 281         /* Check if a frame has been written to the IN frame buffer */
 282         if (FrameIN.FrameLength)
 283         {
 284                 /* Indicate packet processing started */
 285                 LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
 286
 287                 /* Process the ethernet frame - replace this with your own Ethernet handler code as desired */
 288                 Ethernet_ProcessPacket();
 289
 290                 /* Indicate packet processing complete */
 291                 LEDs_SetAllLEDs(LEDMASK_USB_READY);
 292         }
 293 }
 294