converter/m0110_usb/Makefile

   1 # Target file name (without extension).
   2 TARGET = m0110
   3
   4 # Directory common source filess exist
   5 TOP_DIR = ../..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap.c \
  12         matrix.c \
  13         led.c \
  14         m0110.c
  15
  16 CONFIG_H = config.h
  17
  18
  19 # MCU name, you MUST set this to match the board you are using
  20 # type "make clean" after changing this, so all files will be rebuilt
  21 #MCU = at90usb162       # Teensy 1.0
  22 MCU = atmega32u4       # Teensy 2.0
  23 #MCU = at90usb646       # Teensy++ 1.0
  24 #MCU = at90usb1286      # Teensy++ 2.0
  25
  26
  27 # Processor frequency.
  28 #   Normally the first thing your program should do is set the clock prescaler,
  29 #   so your program will run at the correct speed.  You should also set this
  30 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  31 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  32 F_CPU = 16000000
  33
  34
  35 # Boot Section Size in bytes
  36 #   Teensy halfKay   512
  37 #   Atmel DFU loader 4096
  38 #   LUFA bootloader  4096
  39 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  40
  41
  42 # Build Options
  43 #   *Comment out* to disable the options.
  44 #
  45 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
  46 MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
  47 EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
  48 CONSOLE_ENABLE = yes    # Console for debug(+400)
  49 COMMAND_ENABLE = yes    # Commands for debug and configuration
  50 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  51 #NKRO_ENABLE = yes      # USB Nkey Rollover - not yet supported in LUFA
  52
  53
  54
  55 #---------------- Programming Options --------------------------
  56 PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  57
  58
  59 # Search Path
  60 VPATH += $(TARGET_DIR)
  61 VPATH += $(TOP_DIR)
  62
  63
  64 include $(TOP_DIR)/protocol/pjrc.mk
  65 include $(TOP_DIR)/protocol.mk
  66 include $(TOP_DIR)/common.mk
  67 include $(TOP_DIR)/rules.mk