keyboard/hhkb/Makefile

   1 #----------------------------------------------------------------------------
   2 # On command line:
   3 #
   4 # make all = Make software.
   5 #
   6 # make clean = Clean out built project files.
   7 #
   8 # make coff = Convert ELF to AVR COFF.
   9 #
  10 # make extcoff = Convert ELF to AVR Extended COFF.
  11 #
  12 # make program = Download the hex file to the device.
  13 #                Please customize your programmer settings(PROGRAM_CMD)
  14 #
  15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
  16 #               (must have teensy_loader_cli installed).
  17 #
  18 # make dfu = Download the hex file to the device, using dfu-programmer (must
  19 #            have dfu-programmer installed).
  20 #
  21 # make flip = Download the hex file to the device, using Atmel FLIP (must
  22 #             have Atmel FLIP installed).
  23 #
  24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  25 #               (must have dfu-programmer installed).
  26 #
  27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  28 #                (must have Atmel FLIP installed).
  29 #
  30 # make debug = Start either simulavr or avarice as specified for debugging,
  31 #              with avr-gdb or avr-insight as the front end for debugging.
  32 #
  33 # make filename.s = Just compile filename.c into the assembler code only.
  34 #
  35 # make filename.i = Create a preprocessed source file for use in submitting
  36 #                   bug reports to the GCC project.
  37 #
  38 # To rebuild project do "make clean" then "make all".
  39 #----------------------------------------------------------------------------
  40
  41 # Target file name (without extension).
  42 TARGET ?= hhkb
  43
  44 # Directory common source filess exist
  45 TMK_DIR ?= ../../tmk_core
  46
  47 # Directory keyboard dependent files exist
  48 TARGET_DIR ?= .
  49
  50
  51 # List C source files here. (C dependencies are automatically generated.)
  52 SRC ?=  matrix.c \
  53         led.c
  54
  55 ifeq (yes,$(strip $(RN42_ENABLE)))
  56 CONFIG_H ?= config_rn42.h
  57 else
  58 CONFIG_H ?= config.h
  59 endif
  60
  61
  62 # MCU name
  63 MCU ?= atmega32u4
  64
  65 # Processor frequency.
  66 #     This will define a symbol, F_CPU, in all source code files equal to the
  67 #     processor frequency in Hz. You can then use this symbol in your source code to
  68 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  69 #     automatically to create a 32-bit value in your source code.
  70 #
  71 #     This will be an integer division of F_USB below, as it is sourced by
  72 #     F_USB after it has run through any CPU prescalers. Note that this value
  73 #     does not *change* the processor frequency - it should merely be updated to
  74 #     reflect the processor speed set externally so that the code can use accurate
  75 #     software delays.
  76 F_CPU ?= 16000000
  77
  78
  79 #
  80 # LUFA specific
  81 #
  82 # Target architecture (see library "Board Types" documentation).
  83 ARCH ?= AVR8
  84
  85 # Input clock frequency.
  86 #     This will define a symbol, F_USB, in all source code files equal to the
  87 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  88 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  89 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  90 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  91 #     at the end, this will be done automatically to create a 32-bit value in your
  92 #     source code.
  93 #
  94 #     If no clock division is performed on the input clock inside the AVR (via the
  95 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  96 F_USB ?= $(F_CPU)
  97
  98 # Interrupt driven control endpoint task
  99 #OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 100
 101
 102 # Boot Section Size in *bytes*
 103 #   Teensy halfKay   512
 104 #   Teensy++ halfKay 1024
 105 #   Atmel DFU loader 4096       (TMK Alt Controller)
 106 #   LUFA bootloader  4096
 107 #   USBaspLoader     2048
 108 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 109
 110
 111 # Build Options
 112 #   comment out to disable the options.
 113 #
 114 #BOOTMAGIC_ENABLE ?= yes        # Virtual DIP switch configuration
 115 MOUSEKEY_ENABLE ?= yes          # Mouse keys
 116 EXTRAKEY_ENABLE ?= yes          # Audio control and System control
 117 CONSOLE_ENABLE ?= yes           # Console for debug
 118 COMMAND_ENABLE ?= yes           # Commands for debug and configuration
 119 NKRO_ENABLE ?= yes              # USB Nkey Rollover
 120 #HHKB_JP ?= yes                 # HHKB JP support
 121 #UNIMAP_ENABLE ?= yes           # Universal keymap
 122 #ACTIONMAP_ENABLE ?= yes        # Use 16bit actionmap instead of 8bit keymap
 123 #KEYMAP_SECTION_ENABLE ?= yes   # fixed address keymap for keymap editor
 124
 125 #OPT_DEFS += -DNO_ACTION_TAPPING
 126 #OPT_DEFS += -DNO_ACTION_LAYER
 127 #OPT_DEFS += -DNO_ACTION_MACRO
 128
 129
 130 #
 131 # Keymap file
 132 #
 133 ifeq (yes,$(strip $(UNIMAP_ENABLE)))
 134     KEYMAP_FILE = unimap
 135 else
 136     ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
 137         KEYMAP_FILE = actionmap
 138     else
 139         KEYMAP_FILE = keymap
 140     endif
 141 endif
 142 ifdef KEYMAP
 143     SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
 144 else
 145     ifeq (yes,$(strip $(HHKB_JP)))
 146         SRC := $(KEYMAP_FILE)_jp.c $(SRC)
 147     else
 148         SRC := $(KEYMAP_FILE)_hhkb.c $(SRC)
 149     endif
 150 endif
 151
 152
 153 ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
 154     OPT_DEFS += -DHHKB_JP
 155 endif
 156
 157
 158 # Search Path
 159 VPATH += $(TARGET_DIR)
 160 VPATH += $(TMK_DIR)
 161
 162 ifeq (yes,$(strip $(RN42_ENABLE)))
 163 include rn42.mk
 164 include $(TMK_DIR)/protocol.mk
 165 endif
 166 include $(TMK_DIR)/protocol/lufa.mk
 167 include $(TMK_DIR)/common.mk
 168 include $(TMK_DIR)/rules.mk
 169
 170 debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
 171 debug-on: all
 172
 173 debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
 174 debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
 175 debug-off: all