converter/adb_usb/Makefile.pjrc

   1 # Target file name (without extension).
   2 TARGET = adb_usb_pjrc
   3
   4 # Directory common source filess exist
   5 TOP_DIR = ../..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap_common.c \
  12         matrix.c \
  13         led.c \
  14         adb.c
  15
  16 ifdef KEYMAP
  17     SRC := keymap_$(KEYMAP).c $(SRC)
  18 else
  19     SRC := keymap_ansi.c $(SRC)
  20 endif
  21
  22 CONFIG_H = config.h
  23
  24
  25 # MCU name, you MUST set this to match the board you are using
  26 # type "make clean" after changing this, so all files will be rebuilt
  27 #MCU = at90usb162       # Teensy 1.0
  28 MCU = atmega32u4       # Teensy 2.0
  29 #MCU = at90usb646       # Teensy++ 1.0
  30 #MCU = at90usb1286      # Teensy++ 2.0
  31
  32
  33 # Processor frequency.
  34 #   Normally the first thing your program should do is set the clock prescaler,
  35 #   so your program will run at the correct speed.  You should also set this
  36 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  37 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  38 F_CPU = 16000000
  39
  40
  41 # Boot Section Size in *bytes*
  42 #   Teensy halfKay   512
  43 #   Teensy++ halfKay 1024
  44 #   Atmel DFU loader 4096
  45 #   LUFA bootloader  4096
  46 #   USBaspLoader     2048
  47 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  48
  49
  50 # Build Options
  51 #   comment out to disable the options.
  52 #
  53 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration(+1000)
  54 MOUSEKEY_ENABLE = yes   # Mouse keys(+5000)
  55 EXTRAKEY_ENABLE = yes   # Audio control and System control(+600)
  56 CONSOLE_ENABLE = yes    # Console for debug
  57 COMMAND_ENABLE = yes    # Commands for debug and configuration
  58 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  59 #NKRO_ENABLE = yes      # USB Nkey Rollover(+500)
  60
  61
  62 # Search Path
  63 VPATH += $(TARGET_DIR)
  64 VPATH += $(TOP_DIR)
  65
  66 include $(TOP_DIR)/protocol/pjrc.mk
  67 include $(TOP_DIR)/protocol.mk
  68 include $(TOP_DIR)/common.mk
  69 include $(TOP_DIR)/rules.mk