converter/sun_usb/Makefile

   1 # Target file name (without extension).
   2 TARGET = sun_usb
   3
   4 # Directory common source filess exist
   5 TOP_DIR = ../..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap.c \
  12         matrix.c \
  13         led.c \
  14         command_extra.c \
  15         protocol/serial_soft.c
  16
  17 CONFIG_H = config.h
  18
  19
  20 # MCU name, you MUST set this to match the board you are using
  21 # type "make clean" after changing this, so all files will be rebuilt
  22 #MCU = at90usb162       # Teensy 1.0
  23 MCU = atmega32u4       # Teensy 2.0
  24 #MCU = at90usb646       # Teensy++ 1.0
  25 #MCU = at90usb1286      # Teensy++ 2.0
  26
  27
  28 # Processor frequency.
  29 #   Normally the first thing your program should do is set the clock prescaler,
  30 #   so your program will run at the correct speed.  You should also set this
  31 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  32 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  33 F_CPU = 16000000
  34
  35
  36 #
  37 # LUFA specific
  38 #
  39 # Target architecture (see library "Board Types" documentation).
  40 ARCH = AVR8
  41
  42 # Input clock frequency.
  43 #     This will define a symbol, F_USB, in all source code files equal to the
  44 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  45 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  46 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  47 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  48 #     at the end, this will be done automatically to create a 32-bit value in your
  49 #     source code.
  50 #
  51 #     If no clock division is performed on the input clock inside the AVR (via the
  52 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  53 F_USB = $(F_CPU)
  54
  55 # Interrupt driven control endpoint task
  56 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  57
  58
  59 # Build Options
  60 #   *Comment out* to disable the options.
  61 #
  62 MOUSEKEY_ENABLE = yes   # Mouse keys
  63 EXTRAKEY_ENABLE = yes   # Audio control and System control
  64 CONSOLE_ENABLE = yes    # Console for debug
  65 #NKRO_ENABLE = yes      # USB Nkey Rollover
  66
  67
  68 # Boot Section Size in bytes
  69 #   Teensy halfKay   512
  70 #   Atmel DFU loader 4096
  71 #   LUFA bootloader  4096
  72 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  73
  74
  75 # Search Path
  76 VPATH += $(TARGET_DIR)
  77 VPATH += $(TOP_DIR)
  78
  79
  80 include $(TOP_DIR)/protocol/lufa.mk
  81 include $(TOP_DIR)/protocol.mk
  82 include $(TOP_DIR)/common.mk
  83 include $(TOP_DIR)/rules.mk