pana_m8: Add initial files
[tmk_keyboard.git] / orphan / ascii_usb / config.h
1 /*
2 Copyright 2014 Jun Wako <wakojun@gmail.com>
3
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
8
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
13
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
16 */
17
18 #ifndef CONFIG_H
19 #define CONFIG_H
20
21 #define VENDOR_ID 0xFEED
22 #define PRODUCT_ID 0x5C01
23 #define DEVICE_VER 0x0100
24 #define MANUFACTURER t.m.k.
25 #define PRODUCT ASCII keyboard converter
26 #define DESCRIPTION converts Serial Console Terminal into USB keyboard
27
28
29 /* matrix size */
30 #define MATRIX_ROWS 16
31 #define MATRIX_COLS 16
32
33 /* key combination for command */
34 #define IS_COMMAND() ( \
35 host_get_first_key() == KC_BRK \
36 )
37
38
39 /*
40 * Serial(USART) configuration
41 * asynchronous, positive logic, 19200baud, bit order: LSB first
42 * 1-start bit, 8-data bit, odd parity, 1-stop bit
43 */
44 #ifdef __AVR_ATmega32U4__
45 #define SERIAL_UART_BAUD 19200
46 #define SERIAL_UART_DATA UDR1
47 #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
48 #define SERIAL_UART_RXD_VECT USART1_RX_vect
49 #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
50 #define SERIAL_UART_INIT() do { \
51 UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
52 UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
53 UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
54 UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
55 UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \
56 sei(); \
57 } while(0)
58 #else
59 #error "USART configuration is needed."
60 #endif
61
62 /* disable action features */
63 #define NO_ACTION_LAYER
64 #define NO_ACTION_TAPPING
65 #define NO_ACTION_ONESHOT
66 #define NO_ACTION_MACRO
67 #define NO_ACTION_FUNCTION
68
69
70 #endif
Imprint / Impressum