converter/ps2_usb/Makefile.pjrc

   1 # Target file name (without extension).
   2 TARGET = ps2_usb_pjrc
   3
   4 # Directory common source filess exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   matrix.c \
  12         led.c
  13
  14 ifdef KEYMAP
  15     SRC := keymap_$(KEYMAP).c $(SRC)
  16 else
  17     SRC := keymap_plain.c $(SRC)
  18 endif
  19
  20 CONFIG_H = config.h
  21
  22
  23 # MCU name, you MUST set this to match the board you are using
  24 # type "make clean" after changing this, so all files will be rebuilt
  25 #MCU = at90usb162       # Teensy 1.0
  26 MCU = atmega32u4       # Teensy 2.0
  27 #MCU = at90usb646       # Teensy++ 1.0
  28 #MCU = at90usb1286      # Teensy++ 2.0
  29
  30
  31 # Processor frequency.
  32 #   Normally the first thing your program should do is set the clock prescaler,
  33 #   so your program will run at the correct speed.  You should also set this
  34 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  35 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  36 F_CPU = 16000000
  37
  38
  39 # Boot Section Size in *bytes*
  40 #   Teensy halfKay   512
  41 #   Teensy++ halfKay 1024
  42 #   Atmel DFU loader 4096
  43 #   LUFA bootloader  4096
  44 #   USBaspLoader     2048
  45 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  46
  47
  48 # Build Options
  49 #   *Comment out* to disable the options.
  50 #
  51 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
  52 MOUSEKEY_ENABLE = yes   # Mouse keys
  53 EXTRAKEY_ENABLE = yes   # Audio control and System control
  54 CONSOLE_ENABLE = yes    # Console for debug(+400)
  55 COMMAND_ENABLE = yes    # Commands for debug and configuration
  56 NKRO_ENABLE = yes       # USB Nkey Rollover
  57
  58
  59 # PS/2 Options
  60 #
  61 #PS2_USE_USART = yes    # uses hardware USART engine for PS/2 signal receive(recomened)
  62 #PS2_USE_INT = yes      # uses external interrupt for falling edge of PS/2 clock pin
  63 PS2_USE_BUSYWAIT = yes  # uses primitive reference code
  64
  65
  66 # Search Path
  67 VPATH += $(TARGET_DIR)
  68 VPATH += $(TMK_DIR)
  69
  70
  71 include $(TMK_DIR)/protocol.mk
  72 include $(TMK_DIR)/protocol/pjrc.mk
  73 include $(TMK_DIR)/common.mk
  74 include $(TMK_DIR)/rules.mk