keyboard/infinity_chibios/Makefile

   1 # Target file name (without extension).
   2 PROJECT = ch
   3
   4 # Directory common source files exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # project specific files
  11 SRC =   matrix.c \
  12         led.c
  13
  14 ifdef KEYMAP
  15     SRC := keymap_$(KEYMAP).c $(SRC)
  16 else
  17     SRC := keymap_plain.c $(SRC)
  18 endif
  19
  20 CONFIG_H = config.h
  21
  22 ## chip/board settings
  23 # - the next two should match the directories in
  24 #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
  25 # - For Teensies, FAMILY = KINETIS and SERIES is either
  26 #   KL2x (LC) or K20x (3.0,3.1,3.2).
  27 # - For Infinity KB, SERIES = K20x
  28 MCU_FAMILY = KINETIS
  29 MCU_SERIES = K20x
  30
  31 # Linker script to use
  32 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
  33 #   or <this_dir>/ld/
  34 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
  35 # - LDSCRIPT =
  36 #   - MKL26Z64 for Teensy LC
  37 #   - MK20DX128 for Teensy 3.0
  38 #   - MK20DX256 for Teensy 3.1 and 3.2
  39 #   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
  40 MCU_LDSCRIPT = MK20DX128BLDR4
  41
  42 # Startup code to use
  43 #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
  44 # - STARTUP =
  45 #   - kl2x for Teensy LC
  46 #   - k20x5 for Teensy 3.0 and Infinity KB
  47 #   - k20x7 for Teensy 3.1 and 3.2
  48 MCU_STARTUP = k20x5
  49
  50 # Board: it should exist either in <chibios>/os/hal/boards/
  51 #  or <this_dir>/boards
  52 # - BOARD =
  53 #   - PJRC_TEENSY_LC for Teensy LC
  54 #   - PJRC_TEENSY_3 for Teensy 3.0
  55 #   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
  56 #   - MCHCK_K20 for Infinity KB
  57 BOARD = MCHCK_K20
  58
  59 # Cortex version
  60 # Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
  61 MCU  = cortex-m4
  62
  63 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
  64 # I.e. 6 for Teensy LC; 7 for Teensy 3.x
  65 ARMV = 7
  66
  67 # Vector table for application
  68 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
  69 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
  70 OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
  71
  72 # Build Options
  73 #   comment out to disable the options.
  74 #
  75 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
  76 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
  77 MOUSEKEY_ENABLE = yes   # Mouse keys
  78 EXTRAKEY_ENABLE = yes   # Audio control and System control
  79 CONSOLE_ENABLE = yes    # Console for debug
  80 COMMAND_ENABLE = yes    # Commands for debug and configuration
  81 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  82 NKRO_ENABLE = yes           # USB Nkey Rollover
  83
  84 include $(TMK_DIR)/tool/chibios/common.mk
  85 include $(TMK_DIR)/tool/chibios/chibios.mk
  86
  87 program: $(BUILDDIR)/$(PROJECT).bin
  88         dfu-util -D $(BUILDDIR)/$(PROJECT).bin