keyboard/onekey/Makefile.vusb

   1 # Target file name (without extension).
   2 TARGET = onekey_vusb
   3
   4 # Directory common source filess exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap.c \
  12         matrix.c \
  13         led.c
  14
  15 CONFIG_H = config.h
  16
  17
  18 # MCU name, you MUST set this to match the board you are using
  19 # type "make clean" after changing this, so all files will be rebuilt
  20 #MCU = atmega168p
  21 MCU = atmega328p
  22
  23
  24 # Processor frequency.
  25 #   Normally the first thing your program should do is set the clock prescaler,
  26 #   so your program will run at the correct speed.  You should also set this
  27 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  28 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  29 F_CPU = 12000000
  30
  31
  32 # Build Options
  33 #   comment out to disable the options.
  34 #
  35 #MOUSEKEY_ENABLE = yes  # Mouse keys
  36 #EXTRAKEY_ENABLE = yes  # Audio control and System control
  37 #NKRO_ENABLE = yes      # USB Nkey Rollover
  38
  39
  40
  41 #---------------- Programming Options --------------------------
  42 AVRDUDE = avrdude
  43 # Type: avrdude -c ? to get a full listing.
  44 AVRDUDE_PROGRAMMER = usbasp
  45 AVRDUDE_PORT =
  46 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  47 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  48
  49 # Uncomment the following if you want avrdude's erase cycle counter.
  50 # Note that this counter needs to be initialized first using -Yn,
  51 # see avrdude manual.
  52 #AVRDUDE_ERASE_COUNTER = -y
  53
  54 # Uncomment the following if you do /not/ wish a verification to be
  55 # performed after programming the device.
  56 #AVRDUDE_NO_VERIFY = -V
  57
  58 # Increase verbosity level.  Please use this when submitting bug
  59 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  60 # to submit bug reports.
  61 #AVRDUDE_VERBOSE = -v -v
  62
  63 #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  64 AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
  65 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  66 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  67 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  68
  69 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  70
  71
  72 # Boot Section Size in bytes
  73 #   Teensy halfKay   512
  74 #   Atmel DFU loader 4096
  75 #   LUFA bootloader  4096
  76 #   USBasp           2048
  77 OPT_DEFS += -DBOOTLOADER_SIZE=2048
  78
  79
  80 # Search Path
  81 VPATH += $(TARGET_DIR)
  82 VPATH += $(TMK_DIR)
  83
  84
  85 include $(TMK_DIR)/protocol.mk
  86 include $(TMK_DIR)/common.mk
  87 include $(TMK_DIR)/protocol/vusb.mk
  88 include $(TMK_DIR)/rules.mk