keyboard/teensy_lc_onekey/Makefile

   1 # Target file name (without extension).
   2 PROJECT = ch
   3
   4 # Directory common source files exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # project specific files
  11 SRC =   matrix.c \
  12             led.c
  13
  14 ifdef KEYMAP
  15     SRC := keymap_$(KEYMAP).c $(SRC)
  16 else
  17     SRC := keymap_plain.c $(SRC)
  18 endif
  19
  20 CONFIG_H = config.h
  21
  22 ## chip/board settings
  23 # - the next two should match the directories in
  24 #   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
  25 # - For Teensies, FAMILY = KINETIS and SERIES is either
  26 #   KL2x (LC) or K20x (3.0,3.1,3.2).
  27 MCU_FAMILY = KINETIS
  28 MCU_SERIES = KL2x
  29
  30 # Linker script to use
  31 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
  32 #   or <this_dir>/ld/
  33 # - NOTE: a custom ld script is needed for EEPROM on Teensy LC
  34 # - LDSCRIPT =
  35 #   - MKL26Z64 for Teensy LC
  36 #   - MK20DX128 for Teensy 3.0
  37 #   - MK20DX256 for Teensy 3.1 and 3.2
  38 MCU_LDSCRIPT = MKL26Z64
  39
  40 # Startup code to use
  41 #  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
  42 # - STARTUP =
  43 #   - kl2x for Teensy LC
  44 #   - k20x5 for Teensy 3.0
  45 #   - k20x7 for Teensy 3.1 and 3.2
  46 MCU_STARTUP = kl2x
  47
  48 # Board: it should exist either in <chibios>/os/hal/boards/
  49 #  or <this_dir>/boards
  50 # - BOARD =
  51 #   - PJRC_TEENSY_LC for Teensy LC
  52 #   - PJRC_TEENSY_3 for Teensy 3.0
  53 #   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
  54 BOARD = PJRC_TEENSY_LC
  55
  56 # Cortex version
  57 # Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
  58 MCU  = cortex-m0plus
  59
  60 # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
  61 # I.e. 6 for Teensy LC; 7 for Teensy 3.x
  62 ARMV = 6
  63
  64 # Build Options
  65 #   comment out to disable the options.
  66 #
  67 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration
  68 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
  69 MOUSEKEY_ENABLE = yes   # Mouse keys
  70 EXTRAKEY_ENABLE = yes   # Audio control and System control
  71 CONSOLE_ENABLE = yes    # Console for debug
  72 COMMAND_ENABLE = yes    # Commands for debug and configuration
  73 SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  74 NKRO_ENABLE = yes           # USB Nkey Rollover
  75
  76 include $(TMK_DIR)/tool/chibios/common.mk
  77 include $(TMK_DIR)/tool/chibios/chibios.mk