ps2_vusb/Makefile

   1 # Target file name (without extension).
   2 TARGET = ps2_vusb
   3
   4 # Directory common source filess exist
   5 COMMON_DIR = ..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 TARGET_SRC =    main.c \
  12                 keymap.c \
  13                 matrix.c \
  14                 led.c \
  15                 ps2_usart.c \
  16                 sendchar_dummy.c
  17 #               sendchar_usart.c
  18
  19 OPT_DEFS = -DDEBUG_LEVEL=0
  20
  21
  22 # MCU name, you MUST set this to match the board you are using
  23 # type "make clean" after changing this, so all files will be rebuilt
  24 #MCU = at90usb162       # Teensy 1.0
  25 #MCU = atmega32u4       # Teensy 2.0
  26 #MCU = at90usb646       # Teensy++ 1.0
  27 #MCU = at90usb1286      # Teensy++ 2.0
  28 MCU = atmega168
  29
  30
  31 # Processor frequency.
  32 #   Normally the first thing your program should do is set the clock prescaler,
  33 #   so your program will run at the correct speed.  You should also set this
  34 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  35 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  36 F_CPU = 20000000
  37
  38
  39 # Build Options
  40 #   comment out to disable the options.
  41 #
  42 MOUSEKEY_ENABLE = yes   # Mouse keys
  43 #USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
  44 #USB_NKRO_ENABLE = yes  # USB Nkey Rollover
  45
  46
  47
  48 #---------------- Programming Options (avrdude) ----------------
  49 # Type: avrdude -c ? to get a full listing.
  50 AVRDUDE_PROGRAMMER = usbasp
  51 AVRDUDE_PORT =
  52 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  53 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  54
  55 # Uncomment the following if you want avrdude's erase cycle counter.
  56 # Note that this counter needs to be initialized first using -Yn,
  57 # see avrdude manual.
  58 #AVRDUDE_ERASE_COUNTER = -y
  59
  60 # Uncomment the following if you do /not/ wish a verification to be
  61 # performed after programming the device.
  62 #AVRDUDE_NO_VERIFY = -V
  63
  64 # Increase verbosity level.  Please use this when submitting bug
  65 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  66 # to submit bug reports.
  67 #AVRDUDE_VERBOSE = -v -v
  68
  69 #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  70 AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
  71 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  72 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  73 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  74
  75
  76
  77 include $(COMMON_DIR)/Makefile.vusb
  78 include $(COMMON_DIR)/Makefile.common