converter/ps2_usb/Makefile.jis

   1 # Target file name (without extension).
   2 TARGET = ps2_usb_jis
   3
   4 # Directory common source filess exist
   5 TOP_DIR = ../..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10
  11 # MCU name, you MUST set this to match the board you are using
  12 # type "make clean" after changing this, so all files will be rebuilt
  13 #MCU = at90usb162       # Teensy 1.0
  14 MCU = atmega32u4       # Teensy 2.0
  15 #MCU = at90usb646       # Teensy++ 1.0
  16 #MCU = at90usb1286      # Teensy++ 2.0
  17
  18
  19 # Processor frequency.
  20 #   Normally the first thing your program should do is set the clock prescaler,
  21 #   so your program will run at the correct speed.  You should also set this
  22 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  23 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  24 F_CPU = 16000000
  25
  26
  27 # Build Options
  28 #   *Comment out* to disable the options.
  29 #
  30 MOUSEKEY_ENABLE = yes   # Mouse keys
  31 EXTRAKEY_ENABLE = yes   # Audio control and System control
  32 NKRO_ENABLE = yes       # USB Nkey Rollover
  33
  34 #PS2_USE_USART = yes    # uses hardware USART engine for PS/2 signal receive(recomened)
  35 #PS2_USE_INT = yes      # uses external interrupt for falling edge of PS/2 clock pin
  36 PS2_USE_BUSYWAIT = yes  # uses primitive reference code
  37
  38
  39 # keyboard dependent files
  40 SRC =   keymap_jis.c \
  41         matrix.c \
  42         led.c
  43
  44
  45 ifdef PS2_USE_USART
  46     SRC += protocol/ps2_usart.c
  47     OPT_DEFS += -DPS2_USE_USART
  48 endif
  49 ifdef PS2_USE_INT
  50     SRC += protocol/ps2.c
  51     OPT_DEFS += -DPS2_USE_INT
  52 endif
  53 ifdef PS2_USE_BUSYWAIT
  54     SRC += protocol/ps2.c
  55     OPT_DEFS += -DPS2_USE_BUSYWAIT
  56 endif
  57
  58
  59 #CONFIG_H = config_pjrc_usart.h
  60 CONFIG_H = config.h
  61
  62
  63 #---------------- Programming Options --------------------------
  64 PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  65
  66
  67 # Search Path
  68 VPATH += $(TARGET_DIR)
  69 VPATH += $(TOP_DIR)
  70
  71
  72 include $(TOP_DIR)/protocol/pjrc.mk
  73 include $(TOP_DIR)/protocol.mk
  74 include $(TOP_DIR)/common.mk
  75 include $(TOP_DIR)/rules.mk