converter/terminal_bluefruit/config.h

   1 /*
   2 Converter for 70% IBM Terminal Keyboard
   3 Author: Benjamin Gould, 2013
   4 Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
   5
   6 This program is free software: you can redistribute it and/or modify
   7 it under the terms of the GNU General Public License as published by
   8 the Free Software Foundation, either version 2 of the License, or
   9 (at your option) any later version.
  10
  11 This program is distributed in the hope that it will be useful,
  12 but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 GNU General Public License for more details.
  15
  16 You should have received a copy of the GNU General Public License
  17 along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18 */
  19
  20 #ifndef CONFIG_H
  21 #define CONFIG_H
  22
  23
  24 #define VENDOR_ID       0xFEED
  25 #define PRODUCT_ID      0x6535
  26 #define DEVICE_VER      0x0100
  27 #define MANUFACTURER    t.m.k.
  28 #define PRODUCT         70% IBM Terminal Keyboard Converter w/ Bluetooth
  29 #define DESCRIPTION     USB converter for IBM Terminal Keyboard w/ Bluetooth
  30
  31
  32 /* matrix size */
  33 #define MATRIX_ROWS 17  // keycode bit: 3-0
  34 #define MATRIX_COLS 8   // keycode bit: 6-4
  35
  36
  37 /* legacy keymap support */
  38 // #define USE_LEGACY_KEYMAP
  39
  40
  41 /* key combination for command */
  42 #define IS_COMMAND() ( \
  43     (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
  44     (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)))  \
  45 )
  46
  47 /* USART configuration
  48  *     asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
  49  */
  50 #ifdef __AVR_ATmega32U4__
  51     #define SERIAL_UART_BAUD       9600
  52     #define SERIAL_UART_DATA       UDR1
  53     #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
  54     #define SERIAL_UART_RXD_VECT   USART1_RX_vect
  55     #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
  56     #define SERIAL_UART_INIT()     do { \
  57         UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
  58         UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
  59         UCSR1B = (1<<TXEN1);                /* TX: enable */ \
  60         UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
  61                  (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
  62         sei(); \
  63     } while(0)
  64 #else
  65 #   error "USART configuration is needed."
  66 #endif
  67
  68 /*
  69  * PS/2 Interrupt configuration
  70  */
  71 #ifdef PS2_USE_INT
  72 /* uses INT1 for clock line(ATMega32U4) */
  73 #define PS2_CLOCK_PORT  PORTD
  74 #define PS2_CLOCK_PIN   PIND
  75 #define PS2_CLOCK_DDR   DDRD
  76 #define PS2_CLOCK_BIT   1
  77
  78 #define PS2_DATA_PORT   PORTD
  79 #define PS2_DATA_PIN    PIND
  80 #define PS2_DATA_DDR    DDRD
  81 #define PS2_DATA_BIT    0
  82
  83 #define PS2_INT_INIT()  do {    \
  84     EICRA |= ((1<<ISC11) |      \
  85               (0<<ISC10));      \
  86 } while (0)
  87 #define PS2_INT_ON()  do {      \
  88     EIMSK |= (1<<INT1);         \
  89 } while (0)
  90 #define PS2_INT_OFF() do {      \
  91     EIMSK &= ~(1<<INT1);        \
  92 } while (0)
  93 #define PS2_INT_VECT    INT1_vect
  94 #endif
  95
  96
  97 /*
  98  * PS/2 Busywait configuration
  99  */
 100 #ifdef PS2_USE_BUSYWAIT
 101 #define PS2_CLOCK_PORT  PORTD
 102 #define PS2_CLOCK_PIN   PIND
 103 #define PS2_CLOCK_DDR   DDRD
 104 #define PS2_CLOCK_BIT   1
 105
 106 #define PS2_DATA_PORT   PORTD
 107 #define PS2_DATA_PIN    PIND
 108 #define PS2_DATA_DDR    DDRD
 109 #define PS2_DATA_BIT    0
 110 #endif
 111
 112 #endif