converter/ps2_usb/Makefile.pjrc

   1 # Target file name (without extension).
   2 TARGET = ps2_usb_pjrc
   3
   4 # Directory common source filess exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap_common.c \
  12         matrix.c \
  13         led.c
  14
  15 ifdef KEYMAP
  16     SRC := keymap_$(KEYMAP).c $(SRC)
  17 else
  18     SRC := keymap_plain.c $(SRC)
  19 endif
  20
  21 CONFIG_H = config.h
  22
  23
  24 # MCU name, you MUST set this to match the board you are using
  25 # type "make clean" after changing this, so all files will be rebuilt
  26 #MCU = at90usb162       # Teensy 1.0
  27 MCU = atmega32u4       # Teensy 2.0
  28 #MCU = at90usb646       # Teensy++ 1.0
  29 #MCU = at90usb1286      # Teensy++ 2.0
  30
  31
  32 # Processor frequency.
  33 #   Normally the first thing your program should do is set the clock prescaler,
  34 #   so your program will run at the correct speed.  You should also set this
  35 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  36 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  37 F_CPU = 16000000
  38
  39
  40 # Boot Section Size in *bytes*
  41 #   Teensy halfKay   512
  42 #   Teensy++ halfKay 1024
  43 #   Atmel DFU loader 4096
  44 #   LUFA bootloader  4096
  45 #   USBaspLoader     2048
  46 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  47
  48
  49 # Build Options
  50 #   *Comment out* to disable the options.
  51 #
  52 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
  53 MOUSEKEY_ENABLE = yes   # Mouse keys
  54 EXTRAKEY_ENABLE = yes   # Audio control and System control
  55 CONSOLE_ENABLE = yes    # Console for debug(+400)
  56 COMMAND_ENABLE = yes    # Commands for debug and configuration
  57 NKRO_ENABLE = yes       # USB Nkey Rollover
  58
  59
  60 # PS/2 Options
  61 #
  62 #PS2_USE_USART = yes    # uses hardware USART engine for PS/2 signal receive(recomened)
  63 #PS2_USE_INT = yes      # uses external interrupt for falling edge of PS/2 clock pin
  64 PS2_USE_BUSYWAIT = yes  # uses primitive reference code
  65
  66
  67 # Search Path
  68 VPATH += $(TARGET_DIR)
  69 VPATH += $(TMK_DIR)
  70
  71
  72 include $(TMK_DIR)/protocol.mk
  73 include $(TMK_DIR)/protocol/pjrc.mk
  74 include $(TMK_DIR)/common.mk
  75 include $(TMK_DIR)/rules.mk