alps64: Add unimap support
[tmk_keyboard.git] / keyboard / alps64 / Makefile
1 # Target file name (without extension).
2 TARGET ?= alps64
3
4 # Directory common source filess exist
5 TMK_DIR ?= ../../tmk_core
6
7 # Directory keyboard dependent files exist
8 TARGET_DIR ?= .
9
10 # project specific files
11 SRC ?= matrix.c \
12 led.c
13
14 CONFIG_H ?= config.h
15
16
17 # MCU name
18 MCU ?= atmega32u2
19
20 # Processor frequency.
21 # This will define a symbol, F_CPU, in all source code files equal to the
22 # processor frequency in Hz. You can then use this symbol in your source code to
23 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
24 # automatically to create a 32-bit value in your source code.
25 #
26 # This will be an integer division of F_USB below, as it is sourced by
27 # F_USB after it has run through any CPU prescalers. Note that this value
28 # does not *change* the processor frequency - it should merely be updated to
29 # reflect the processor speed set externally so that the code can use accurate
30 # software delays.
31 F_CPU ?= 16000000
32
33
34 #
35 # LUFA specific
36 #
37 # Target architecture (see library "Board Types" documentation).
38 ARCH ?= AVR8
39
40 # Input clock frequency.
41 # This will define a symbol, F_USB, in all source code files equal to the
42 # input clock frequency (before any prescaling is performed) in Hz. This value may
43 # differ from F_CPU if prescaling is used on the latter, and is required as the
44 # raw input clock is fed directly to the PLL sections of the AVR for high speed
45 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
46 # at the end, this will be done automatically to create a 32-bit value in your
47 # source code.
48 #
49 # If no clock division is performed on the input clock inside the AVR (via the
50 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
51 F_USB ?= $(F_CPU)
52
53 # Interrupt driven control endpoint task(+60)
54 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
55
56
57 # Boot Section Size in *bytes*
58 # Teensy halfKay 512
59 # Teensy++ halfKay 1024
60 # Atmel DFU loader 4096
61 # LUFA bootloader 4096
62 # USBaspLoader 2048
63 BOOTLOADER_SIZE ?= 4096
64 OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE)
65
66
67 # Build Options
68 # comment out to disable the options.
69 #
70 BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
71 MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
72 EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
73 CONSOLE_ENABLE ?= yes # Console for debug(+400)
74 COMMAND_ENABLE ?= yes # Commands for debug and configuration
75 #SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
76 #NKRO_ENABLE ?= yes # USB Nkey Rollover
77 #ACTIONMAP_ENABLE ?= yes # Use 16bit action codes in keymap instead of 8bit keycodes
78
79
80 #
81 # Keymap file
82 #
83 ifeq (yes,$(strip $(UNIMAP_ENABLE)))
84 KEYMAP_FILE = unimap
85 else
86 ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
87 KEYMAP_FILE = actionmap
88 else
89 KEYMAP_FILE = keymap
90 endif
91 endif
92 ifdef KEYMAP
93 SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
94 else
95 SRC := $(KEYMAP_FILE)_plain.c $(SRC)
96 endif
97
98
99 # Optimize size but this may cause error "relocation truncated to fit"
100 #EXTRALDFLAGS = -Wl,--relax
101
102 # Search Path
103 VPATH += $(TARGET_DIR)
104 VPATH += $(TMK_DIR)
105
106 include $(TMK_DIR)/protocol/lufa.mk
107 include $(TMK_DIR)/common.mk
108 include $(TMK_DIR)/rules.mk
Imprint / Impressum