converter/news_usb/Makefile.pjrc

   1 #
   2 # Makefile for PJRC Teensy
   3 #
   4
   5
   6 # Target file name (without extension).
   7 TARGET = news_usb_pjrc
   8
   9 # Directory common source filess exist
  10 TMK_DIR = ../../tmk_core
  11
  12 # Directory keyboard dependent files exist
  13 TARGET_DIR = .
  14
  15 # keyboard dependent files
  16 SRC =   keymap.c \
  17         matrix.c \
  18         led.c \
  19         news.c
  20
  21 CONFIG_H = config_pjrc.h
  22
  23
  24 # MCU name, you MUST set this to match the board you are using
  25 # type "make clean" after changing this, so all files will be rebuilt
  26 #MCU = at90usb162       # Teensy 1.0
  27 MCU = atmega32u4       # Teensy 2.0
  28 #MCU = at90usb646       # Teensy++ 1.0
  29 #MCU = at90usb1286      # Teensy++ 2.0
  30
  31
  32 # Processor frequency.
  33 #   Normally the first thing your program should do is set the clock prescaler,
  34 #   so your program will run at the correct speed.  You should also set this
  35 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  36 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  37 F_CPU = 16000000
  38
  39
  40 # Boot Section Size in *bytes*
  41 #   Teensy halfKay   512
  42 #   Teensy++ halfKay 1024
  43 #   Atmel DFU loader 4096
  44 #   LUFA bootloader  4096
  45 #   USBaspLoader     2048
  46 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  47
  48
  49 # Build Options
  50 #   *Comment out* to disable the options.
  51 #
  52 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration(+1000)
  53 MOUSEKEY_ENABLE = yes   # Mouse keys(+5000)
  54 EXTRAKEY_ENABLE = yes   # Audio control and System control(+600)
  55 CONSOLE_ENABLE = yes    # Console for debug
  56 COMMAND_ENABLE = yes    # Commands for debug and configuration
  57 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  58 NKRO_ENABLE = yes       # USB Nkey Rollover(+500)
  59
  60
  61
  62 #---------------- Programming Options --------------------------
  63 PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  64
  65
  66 # Search Path
  67 VPATH += $(TARGET_DIR)
  68 VPATH += $(TMK_DIR)
  69
  70
  71 include $(TMK_DIR)/protocol/pjrc.mk
  72 include $(TMK_DIR)/protocol.mk
  73 include $(TMK_DIR)/common.mk
  74 include $(TMK_DIR)/rules.mk