Move some projects to 'orphan' directory
[tmk_keyboard.git] / orphan / ghost_squid / Makefile.lufa
1 #----------------------------------------------------------------------------
2 # On command line:
3 #
4 # make all = Make software.
5 #
6 # make clean = Clean out built project files.
7 #
8 # make coff = Convert ELF to AVR COFF.
9 #
10 # make extcoff = Convert ELF to AVR Extended COFF.
11 #
12 # make program = Download the hex file to the device.
13 # Please customize your programmer settings(PROGRAM_CMD)
14 #
15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
16 # (must have teensy_loader_cli installed).
17 #
18 # make dfu = Download the hex file to the device, using dfu-programmer (must
19 # have dfu-programmer installed).
20 #
21 # make flip = Download the hex file to the device, using Atmel FLIP (must
22 # have Atmel FLIP installed).
23 #
24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
25 # (must have dfu-programmer installed).
26 #
27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
28 # (must have Atmel FLIP installed).
29 #
30 # make debug = Start either simulavr or avarice as specified for debugging,
31 # with avr-gdb or avr-insight as the front end for debugging.
32 #
33 # make filename.s = Just compile filename.c into the assembler code only.
34 #
35 # make filename.i = Create a preprocessed source file for use in submitting
36 # bug reports to the GCC project.
37 #
38 # To rebuild project do "make clean" then "make all".
39 #----------------------------------------------------------------------------
40
41 # Target file name (without extension).
42 TARGET = ghostsquid_lufa
43
44 # Directory common source filess exist
45 TMK_DIR = ../../tmk_core
46
47 # Directory keyboard dependent files exist
48 TARGET_DIR = .
49
50 # List C source files here. (C dependencies are automatically generated.)
51 SRC = keymap.c \
52 matrix.c \
53 led.c
54
55 CONFIG_H = config.h
56
57 # MCU name
58 MCU = atmega32u2
59
60 # Processor frequency.
61 # This will define a symbol, F_CPU, in all source code files equal to the
62 # processor frequency in Hz. You can then use this symbol in your source code to
63 # calculate timings. Do NOT tack on a 'UL' at the end, this will be done
64 # automatically to create a 32-bit value in your source code.
65 #
66 # This will be an integer division of F_USB below, as it is sourced by
67 # F_USB after it has run through any CPU prescalers. Note that this value
68 # does not *change* the processor frequency - it should merely be updated to
69 # reflect the processor speed set externally so that the code can use accurate
70 # software delays.
71 F_CPU = 16000000
72
73 #
74 # LUFA specific
75 #
76 # Target architecture (see library "Board Types" documentation).
77 ARCH = AVR8
78
79 # Input clock frequency.
80 # This will define a symbol, F_USB, in all source code files equal to the
81 # input clock frequency (before any prescaling is performed) in Hz. This value may
82 # differ from F_CPU if prescaling is used on the latter, and is required as the
83 # raw input clock is fed directly to the PLL sections of the AVR for high speed
84 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
85 # at the end, this will be done automatically to create a 32-bit value in your
86 # source code.
87 #
88 # If no clock division is performed on the input clock inside the AVR (via the
89 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
90 F_USB = $(F_CPU)
91
92
93 # Build Options
94 # comment out to disable the options.
95 #
96 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
97 MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
98 EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
99 #CONSOLE_ENABLE = yes # Console for debug(+400)
100 COMMAND_ENABLE = yes # Commands for debug and configuration
101 #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
102 #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
103
104
105 # Boot Section Size in bytes
106 # Teensy halfKay 512
107 # Atmel DFU loader 4096
108 # LUFA bootloader 4096
109 OPT_DEFS += -DBOOTLOADER_SIZE=4096
110
111 # Search Path
112 VPATH += $(TARGET_DIR)
113 VPATH += $(TMK_DIR)
114
115 include $(TMK_DIR)/protocol/lufa.mk
116 include $(TMK_DIR)/common.mk
117 include $(TMK_DIR)/rules.mk
Imprint / Impressum