orphan/phantom/Makefile.pjrc

   1 #----------------------------------------------------------------------------
   2 # On command line:
   3 #
   4 # make all = Make software.
   5 #
   6 # make clean = Clean out built project files.
   7 #
   8 # make coff = Convert ELF to AVR COFF.
   9 #
  10 # make extcoff = Convert ELF to AVR Extended COFF.
  11 #
  12 # make program = Download the hex file to the device.
  13 #                Please customize your programmer settings(PROGRAM_CMD)
  14 #
  15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
  16 #               (must have teensy_loader_cli installed).
  17 #
  18 # make dfu = Download the hex file to the device, using dfu-programmer (must
  19 #            have dfu-programmer installed).
  20 #
  21 # make flip = Download the hex file to the device, using Atmel FLIP (must
  22 #             have Atmel FLIP installed).
  23 #
  24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  25 #               (must have dfu-programmer installed).
  26 #
  27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  28 #                (must have Atmel FLIP installed).
  29 #
  30 # make debug = Start either simulavr or avarice as specified for debugging,
  31 #              with avr-gdb or avr-insight as the front end for debugging.
  32 #
  33 # make filename.s = Just compile filename.c into the assembler code only.
  34 #
  35 # make filename.i = Create a preprocessed source file for use in submitting
  36 #                   bug reports to the GCC project.
  37 #
  38 # To rebuild project do "make clean" then "make all".
  39 #----------------------------------------------------------------------------
  40
  41 # Target file name (without extension).
  42 TARGET = phantom_pjrc
  43
  44 # Directory common source filess exist
  45 TMK_DIR = ../../tmk_core
  46
  47 # Directory keyboard dependent files exist
  48 TARGET_DIR = .
  49
  50 # keyboard dependent files
  51 SRC =   keymap.c \
  52         matrix.c \
  53         led.c
  54
  55 CONFIG_H = config.h
  56
  57
  58 # MCU name, you MUST set this to match the board you are using
  59 # type "make clean" after changing this, so all files will be rebuilt
  60 #MCU = at90usb162       # Teensy 1.0
  61 MCU = atmega32u4       # Teensy 2.0
  62 #MCU = at90usb646       # Teensy++ 1.0
  63 #MCU = at90usb1286      # Teensy++ 2.0
  64
  65
  66 # Processor frequency.
  67 #   Normally the first thing your program should do is set the clock prescaler,
  68 #   so your program will run at the correct speed.  You should also set this
  69 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  70 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  71 F_CPU = 16000000
  72
  73
  74 # Build Options
  75 #   comment out to disable the options.
  76 #
  77 BOOTMAGIC_ENABLE = yes  # Virtual DIP switch configuration(+1000)
  78 #MOUSEKEY_ENABLE = yes  # Mouse keys(+5000)
  79 EXTRAKEY_ENABLE = yes   # Audio control and System control(+600)
  80 CONSOLE_ENABLE = yes    # Console for debug
  81 COMMAND_ENABLE = yes    # Commands for debug and configuration
  82 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  83 #NKRO_ENABLE = yes      # USB Nkey Rollover(+500)
  84 #PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
  85
  86
  87 # Search Path
  88 VPATH += $(TARGET_DIR)
  89 VPATH += $(TMK_DIR)
  90
  91 include $(TMK_DIR)/protocol/pjrc.mk
  92 include $(TMK_DIR)/common.mk
  93 include $(TMK_DIR)/rules.mk
  94
  95 ansi: OPT_DEFS += -DLAYOUT_ANSI
  96 ansi: all
  97
  98 ansi_150: OPT_DEFS += -DLAYOUT_ANSI_150
  99 ansi_150: all
 100
 101 iso: OPT_DEFS += -DLAYOUT_ISO
 102 iso: all
 103
 104 iso_150: OPT_DEFS += -DLAYOUT_ISO_150
 105 iso_150: all
 106
 107 7bit: OPT_DEFS += -DLAYOUT_7BIT
 108 7bit: all