converter/sun_usb/config.h

   1 /*
   2 Copyright 2012 Jun Wako <wakojun@gmail.com>
   3
   4 This program is free software: you can redistribute it and/or modify
   5 it under the terms of the GNU General Public License as published by
   6 the Free Software Foundation, either version 2 of the License, or
   7 (at your option) any later version.
   8
   9 This program is distributed in the hope that it will be useful,
  10 but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 GNU General Public License for more details.
  13
  14 You should have received a copy of the GNU General Public License
  15 along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16 */
  17
  18 #ifndef CONFIG_H
  19 #define CONFIG_H
  20
  21 /* controller configuration */
  22 #include "controller_teensy.h"
  23
  24 #define VENDOR_ID       0xFEED
  25 #define PRODUCT_ID      0x3333
  26 #define MANUFACTURER    t.m.k.
  27 #define PRODUCT         Sun keyboard converter
  28 #define DESCRIPTION     converts Sun keyboard protocol into USB
  29
  30
  31 /* matrix size */
  32 #define MATRIX_ROWS 16
  33 #define MATRIX_COLS 8
  34
  35
  36 /* key combination for command */
  37 #define IS_COMMAND() ( \
  38     keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
  39     keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
  40 )
  41
  42
  43 /* Serial(USART) configuration
  44  *     asynchronous, negative logic, 1200baud, no flow control
  45  *     1-start bit, 8-data bit, non parity, 1-stop bit
  46  */
  47 #ifdef __AVR_ATmega32U4__
  48 #   define SERIAL_RX_VECT        USART1_RX_vect
  49 #   define SERIAL_RX_DATA        UDR1
  50 #   define SERIAL_RX_BAUD        1200
  51 #   define SERIAL_RX_UBBR        ((F_CPU/(16UL*SERIAL_RX_BAUD))-1)
  52 #   define SERIAL_RX_INIT()      do { \
  53         UBRR1L = (uint8_t) SERIAL_RX_UBBR; \
  54         UBRR1H = (uint8_t) (SERIAL_RX_UBBR>>8); \
  55         UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
  56     } while(0)
  57 #else
  58 #   error "Serial(USART) configuration is needed."
  59 #endif
  60
  61 #endif