converter/m0110_usb/Makefile.teensy

   1 # Target file name (without extension).
   2 TARGET = m0110_lufa
   3
   4 # Directory common source filess exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   matrix.c \
  12         led.c \
  13         keymap_common.c \
  14         m0110.c
  15
  16 # To use own keymap file run make like: make keymap=hasu
  17 ifdef KEYMAP
  18     SRC += keymap_$(KEYMAP).c
  19 else
  20     SRC += keymap_default.c
  21 endif
  22
  23 CONFIG_H = config.h
  24
  25
  26 # MCU name, you MUST set this to match the board you are using
  27 # type "make clean" after changing this, so all files will be rebuilt
  28 #MCU = at90usb162       # Teensy 1.0
  29 MCU = atmega32u4       # Teensy 2.0
  30 #MCU = at90usb646       # Teensy++ 1.0
  31 #MCU = at90usb1286      # Teensy++ 2.0
  32
  33
  34 # Processor frequency.
  35 #   Normally the first thing your program should do is set the clock prescaler,
  36 #   so your program will run at the correct speed.  You should also set this
  37 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  38 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  39 F_CPU = 16000000
  40
  41
  42 #
  43 # LUFA specific
  44 #
  45 # Target architecture (see library "Board Types" documentation).
  46 ARCH = AVR8
  47
  48 # Input clock frequency.
  49 #     This will define a symbol, F_USB, in all source code files equal to the
  50 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  51 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  52 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  53 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  54 #     at the end, this will be done automatically to create a 32-bit value in your
  55 #     source code.
  56 #
  57 #     If no clock division is performed on the input clock inside the AVR (via the
  58 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  59 F_USB = $(F_CPU)
  60
  61 # Interrupt driven control endpoint task
  62 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  63
  64
  65 # Boot Section Size in bytes
  66 #   Teensy halfKay   512
  67 #   Atmel DFU loader 4096
  68 #   LUFA bootloader  4096
  69 OPT_DEFS += -DBOOTLOADER_SIZE=512
  70
  71
  72 # Build Options
  73 #   *Comment out* to disable the options.
  74 #
  75 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
  76 MOUSEKEY_ENABLE = yes   # Mouse keys(+4700)
  77 EXTRAKEY_ENABLE = yes   # Audio control and System control(+450)
  78 CONSOLE_ENABLE = yes    # Console for debug(+400)
  79 COMMAND_ENABLE = yes    # Commands for debug and configuration
  80 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
  81 #NKRO_ENABLE = yes      # USB Nkey Rollover - not yet supported in LUFA
  82 #KEYMAP_SECTION_ENABLE = yes    # fixed address keymap for keymap editor
  83
  84
  85
  86 #---------------- Programming Options --------------------------
  87 PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  88
  89
  90 # Search Path
  91 VPATH += $(TARGET_DIR)
  92 VPATH += $(TMK_DIR)
  93
  94
  95 include $(TMK_DIR)/protocol/lufa.mk
  96 include $(TMK_DIR)/protocol.mk
  97 include $(TMK_DIR)/common.mk
  98 include $(TMK_DIR)/rules.mk