remove experimental return, cleanup slash_question key
[tmk_keyboard.git] / keyboard / caravan / Makefile.pjrc
1 #----------------------------------------------------------------------------
2 # On command line:
3 #
4 # make all = Make software.
5 #
6 # make clean = Clean out built project files.
7 #
8 # make coff = Convert ELF to AVR COFF.
9 #
10 # make extcoff = Convert ELF to AVR Extended COFF.
11 #
12 # make program = Download the hex file to the device.
13 # Please customize your programmer settings(PROGRAM_CMD)
14 #
15 # make teensy = Download the hex file to the device, using teensy_loader_cli.
16 # (must have teensy_loader_cli installed).
17 #
18 # make dfu = Download the hex file to the device, using dfu-programmer (must
19 # have dfu-programmer installed).
20 #
21 # make flip = Download the hex file to the device, using Atmel FLIP (must
22 # have Atmel FLIP installed).
23 #
24 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
25 # (must have dfu-programmer installed).
26 #
27 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
28 # (must have Atmel FLIP installed).
29 #
30 # make debug = Start either simulavr or avarice as specified for debugging,
31 # with avr-gdb or avr-insight as the front end for debugging.
32 #
33 # make filename.s = Just compile filename.c into the assembler code only.
34 #
35 # make filename.i = Create a preprocessed source file for use in submitting
36 # bug reports to the GCC project.
37 #
38 # To rebuild project do "make clean" then "make all".
39 #----------------------------------------------------------------------------
40
41 # Target file name (without extension).
42 TARGET = gh60_pjrc
43
44 # Directory common source filess exist
45 TMK_DIR = ../../tmk_core
46
47 # Directory keyboard dependent files exist
48 TARGET_DIR = .
49
50 # project specific files
51 SRC = keymap_common.c \
52 matrix.c \
53 led.c
54
55 ifdef KEYMAP
56 SRC := keymap_$(KEYMAP).c $(SRC)
57 else
58 SRC := keymap_poker.c $(SRC)
59 endif
60
61 CONFIG_H = config.h
62
63
64 # MCU name, you MUST set this to match the board you are using
65 # type "make clean" after changing this, so all files will be rebuilt
66 MCU = atmega32u4
67 #MCU = at90usb1286
68
69
70 # Processor frequency.
71 # Normally the first thing your program should do is set the clock prescaler,
72 # so your program will run at the correct speed. You should also set this
73 # variable to same clock speed. The _delay_ms() macro uses this, and many
74 # examples use this variable to calculate timings. Do not add a "UL" here.
75 F_CPU = 16000000
76
77
78 # Boot Section Size in *bytes*
79 # Teensy halfKay 512
80 # Atmel DFU loader 4096
81 # LUFA bootloader 4096
82 OPT_DEFS += -DBOOTLOADER_SIZE=4096
83
84
85 # Build Options
86 # comment out to disable the options.
87 #
88 BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
89 MOUSEKEY_ENABLE = yes # Mouse keys(+5000)
90 EXTRAKEY_ENABLE = yes # Audio control and System control(+600)
91 CONSOLE_ENABLE = yes # Console for debug
92 COMMAND_ENABLE = yes # Commands for debug and configuration
93 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
94 NKRO_ENABLE = yes # USB Nkey Rollover(+500)
95 #PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
96
97
98 # Search Path
99 VPATH += $(TARGET_DIR)
100 VPATH += $(TMK_DIR)
101
102 include $(TMK_DIR)/protocol/pjrc.mk
103 include $(TMK_DIR)/common.mk
104 include $(TMK_DIR)/rules.mk
105
106 plain: OPT_DEFS += -DKEYMAP_PLAIN
107 plain: all
108
109 poker: OPT_DEFS += -DKEYMAP_POKER
110 poker: all
111
112 poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
113 poker_set: all
114
115 poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
116 poker_bit: all
Imprint / Impressum