converter/sun_usb/Makefile

   1 # Target file name (without extension).
   2 TARGET = sun_usb
   3
   4 # Directory common source filess exist
   5 TMK_DIR = ../../tmk_core
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   keymap.c \
  12         matrix.c \
  13         led.c \
  14         command_extra.c \
  15         protocol/serial_soft.c
  16
  17 CONFIG_H = config.h
  18
  19
  20 # MCU name, you MUST set this to match the board you are using
  21 # type "make clean" after changing this, so all files will be rebuilt
  22 #MCU = at90usb162       # Teensy 1.0
  23 #MCU = atmega32u4       # Teensy 2.0
  24 #MCU = at90usb646       # Teensy++ 1.0
  25 #MCU = at90usb1286      # Teensy++ 2.0
  26 MCU = atmega32u2
  27
  28
  29 # Processor frequency.
  30 #   Normally the first thing your program should do is set the clock prescaler,
  31 #   so your program will run at the correct speed.  You should also set this
  32 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  33 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  34 F_CPU = 16000000
  35
  36
  37 #
  38 # LUFA specific
  39 #
  40 # Target architecture (see library "Board Types" documentation).
  41 ARCH = AVR8
  42
  43 # Input clock frequency.
  44 #     This will define a symbol, F_USB, in all source code files equal to the
  45 #     input clock frequency (before any prescaling is performed) in Hz. This value may
  46 #     differ from F_CPU if prescaling is used on the latter, and is required as the
  47 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
  48 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
  49 #     at the end, this will be done automatically to create a 32-bit value in your
  50 #     source code.
  51 #
  52 #     If no clock division is performed on the input clock inside the AVR (via the
  53 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
  54 F_USB = $(F_CPU)
  55
  56 # Interrupt driven control endpoint task
  57 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
  58
  59
  60 # Build Options
  61 #   *Comment out* to disable the options.
  62 #
  63 MOUSEKEY_ENABLE = yes   # Mouse keys
  64 EXTRAKEY_ENABLE = yes   # Audio control and System control
  65 CONSOLE_ENABLE = yes    # Console for debug
  66 COMMAND_ENABLE = yes    # Commands for debug and configuration
  67 #NKRO_ENABLE = yes      # USB Nkey Rollover
  68
  69
  70 # Boot Section Size in bytes
  71 #   Teensy halfKay   512
  72 #   Atmel DFU loader 4096
  73 #   LUFA bootloader  4096
  74 OPT_DEFS += -DBOOTLOADER_SIZE=4096
  75
  76
  77 # Search Path
  78 VPATH += $(TARGET_DIR)
  79 VPATH += $(TMK_DIR)
  80
  81
  82 include $(TMK_DIR)/protocol/lufa.mk
  83 include $(TMK_DIR)/protocol.mk
  84 include $(TMK_DIR)/common.mk
  85 include $(TMK_DIR)/rules.mk