keyboard/hbk/Makefile

   1 # Target file name (without extension).
   2 TARGET = hbk
   3
   4 # Directory common source filess exist
   5 TOP_DIR = ../..
   6
   7 # Directory keyboard dependent files exist
   8 TARGET_DIR = .
   9
  10 # keyboard dependent files
  11 SRC =   main.c \
  12         keymap.c \
  13         matrix.c \
  14         led.c
  15
  16 CONFIG_H = config.h
  17
  18
  19 # MCU name, you MUST set this to match the board you are using
  20 # type "make clean" after changing this, so all files will be rebuilt
  21 #MCU = at90usb162       # Teensy 1.0
  22 MCU = atmega32u4       # Teensy 2.0
  23 #MCU = at90usb646       # Teensy++ 1.0
  24 #MCU = at90usb1286      # Teensy++ 2.0
  25
  26
  27 # Processor frequency.
  28 #   Normally the first thing your program should do is set the clock prescaler,
  29 #   so your program will run at the correct speed.  You should also set this
  30 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  31 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  32 F_CPU = 16000000
  33
  34
  35 # Build Options
  36 #   comment out to disable the options.
  37 #
  38 MOUSEKEY_ENABLE = yes   # Mouse keys
  39 #PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
  40 EXTRAKEY_ENABLE = yes   # Audio control and System control
  41 #NKRO_ENABLE = yes      # USB Nkey Rollover
  42
  43
  44
  45 #---------------- Programming Options --------------------------
  46 #PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  47 PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
  48               /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
  49               /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
  50
  51
  52
  53 include $(TOP_DIR)/protocol/pjrc.mk
  54 include $(TOP_DIR)/protocol.mk
  55 include $(TOP_DIR)/common.mk
  56 include $(TOP_DIR)/rules.mk