converter/next_usb/config.h

   1 /*
   2 NeXT non-ADB Keyboard USB Converter
   3
   4 Copyright 2013, Benjamin Gould (bgould@github.com)
   5
   6 Based on:
   7 TMK firmware code Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
   8 Arduino code by "Ladyada" Limor Fried (http://ladyada.net/, http://adafruit.com/), released under BSD license
   9
  10 Timing reference thanks to http://m0115.web.fc2.com/ (dead link), http://cfile7.uf.tistory.com/image/14448E464F410BF22380BB
  11 Pinouts thanks to http://www.68k.org/~degs/nextkeyboard.html
  12 Keycodes from http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-6/src/sys/arch/next68k/dev/
  13
  14 This software is licensed with a Modified BSD License.
  15 All of this is supposed to be Free Software, Open Source, DFSG-free,
  16 GPL-compatible, and OK to use in both free and proprietary applications.
  17 Additions and corrections to this file are welcome.
  18
  19 Redistribution and use in source and binary forms, with or without
  20 modification, are permitted provided that the following conditions are met:
  21
  22 * Redistributions of source code must retain the above copyright
  23   notice, this list of conditions and the following disclaimer.
  24
  25 * Redistributions in binary form must reproduce the above copyright
  26   notice, this list of conditions and the following disclaimer in
  27   the documentation and/or other materials provided with the
  28   distribution.
  29
  30 * Neither the name of the copyright holders nor the names of
  31   contributors may be used to endorse or promote products derived
  32   from this software without specific prior written permission.
  33
  34 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  35 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  36 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  37 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  38 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  39 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  40 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  41 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  42 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  43 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  44 POSSIBILITY OF SUCH DAMAGE.
  45
  46 */
  47
  48 #define VENDOR_ID       0xBCBC
  49 #define PRODUCT_ID      0xBCBC
  50 #define DEVICE_VER      0x0500
  51 #define MANUFACTURER    t.m.k.
  52 #define PRODUCT         NeXT Keyboard to USB converter
  53 #define DESCRIPTION     USB converter for NeXT non-ADB Keyboard
  54
  55 /* matrix size */
  56 #define MATRIX_ROWS 12  // keycode bit: 3-0
  57 #define MATRIX_COLS  8  // keycode bit: 6-4
  58
  59 //#define DEBUG_ON_INIT 1
  60
  61 //#define TEENSY_CONFIG 1
  62 #define PRO_MICRO_CONFIG 1
  63
  64 // comment out if you don't want the keyboard's LEDs to flash upon initialization
  65 #define NEXT_KBD_INIT_FLASH_LEDS
  66
  67 //============= Start of Arduino Pro Micro Configuration ==============
  68 #ifdef PRO_MICRO_CONFIG
  69
  70 // this is the debugging LED that flashes when a key is being pressed
  71 // comment out in order to disable debugging LED
  72 #define NEXT_KBD_LED1_PORT  PORTD
  73 #define NEXT_KBD_LED1_PIN   PIND
  74 #define NEXT_KBD_LED1_DDR   DDRD
  75 #define NEXT_KBD_LED1_BIT   5
  76
  77 #define NEXT_KBD_LED1_ON    NEXT_KBD_LED1_PORT &= ~(1<<NEXT_KBD_LED1_BIT);
  78 #define NEXT_KBD_LED1_OFF   NEXT_KBD_LED1_PORT |=  (1<<NEXT_KBD_LED1_BIT);
  79
  80 // reserved for future use
  81 #define NEXT_KBD_LED2_PORT  PORTB
  82 #define NEXT_KBD_LED2_PIN   PINB
  83 #define NEXT_KBD_LED2_DDR   DDRB
  84 #define NEXT_KBD_LED2_BIT   6
  85
  86 #define NEXT_KBD_LED2_ON    NEXT_KBD_LED2_PORT &= ~(1<<NEXT_KBD_LED2_BIT);
  87 #define NEXT_KBD_LED2_OFF   NEXT_KBD_LED2_PORT |=  (1<<NEXT_KBD_LED2_BIT);
  88
  89 // corresponds to the Keyboard In wire on the NeXT connector
  90 // (red wire in NeXT connector) - pin 2 on the Pro Micro
  91 #define NEXT_KBD_OUT_PORT  PORTD
  92 #define NEXT_KBD_OUT_PIN   PIND
  93 #define NEXT_KBD_OUT_DDR   DDRD
  94 #define NEXT_KBD_OUT_BIT   1
  95
  96 // corresponds to the Keyboard Out wire on the NeXT connector
  97 // (orange wire in NeXT connector) - pin 3 on the Pro Micro
  98 #define NEXT_KBD_IN_PORT   PORTD
  99 #define NEXT_KBD_IN_PIN    PIND
 100 #define NEXT_KBD_IN_DDR    DDRD
 101 #define NEXT_KBD_IN_BIT    0
 102
 103 // this pin is an input for the power key on the NeXT keyboard
 104 // as the keyboard is powered on this should be normally high;
 105 // if it is pulled low it means the power button is being preseed
 106 // (yellow wire in NeXT connector) - pin 4 on the Pro Micro
 107 #define NEXT_KBD_PWR_PORT  PORTD
 108 #define NEXT_KBD_PWR_PIN   PIND
 109 #define NEXT_KBD_PWR_DDR   DDRD
 110 #define NEXT_KBD_PWR_BIT   4
 111
 112 #endif
 113 //============== End of Arduino Pro Micro Configuration ===============
 114
 115
 116 //================ Start of Teensy 2.0 Configuration =================
 117 #ifdef TEENSY_CONFIG
 118
 119 // this is the debugging LED that flashes when a key is being pressed
 120 // comment out in order to disable debugging LED
 121 #define NEXT_KBD_LED_PORT  PORTD
 122 #define NEXT_KBD_LED_PIN   PIND
 123 #define NEXT_KBD_LED_DDR   DDRD
 124 #define NEXT_KBD_LED_BIT   6
 125
 126 #define NEXT_KBD_LED_ON  NEXT_KBD_LED_PORT |=  (1<<NEXT_KBD_LED_BIT);
 127 #define NEXT_KBD_LED_OFF NEXT_KBD_LED_PORT &= ~(1<<NEXT_KBD_LED_BIT);
 128
 129 // corresponds to the Keyboard In wire on the NeXT connector
 130 // (red wire in NeXT connector)
 131 #define NEXT_KBD_OUT_PORT  PORTB
 132 #define NEXT_KBD_OUT_PIN   PINB
 133 #define NEXT_KBD_OUT_DDR   DDRB
 134 #define NEXT_KBD_OUT_BIT   1
 135
 136 // corresponds to the Keyboard Out wire on the NeXT connector
 137 // (orange wire in NeXT connector)
 138 #define NEXT_KBD_IN_PORT   PORTB
 139 #define NEXT_KBD_IN_PIN    PINB
 140 #define NEXT_KBD_IN_DDR    DDRB
 141 #define NEXT_KBD_IN_BIT    0
 142
 143 #endif
 144 //================= End of Teensy 2.0 Configuration ==================
 145
 146 /* key combination for command */
 147 #define IS_COMMAND() ( \
 148     (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))|| \
 149     (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL)))  \
 150 )