hhkb/Makefile.iwrap

   1 #
   2 # Makefile for iWRAP
   3 #
   4
   5
   6 # Target file name (without extension).
   7 TARGET = hhkb_iwrap
   8
   9 # Directory common source filess exist
  10 TOP_DIR = ..
  11
  12 # Directory keyboard dependent files exist
  13 TARGET_DIR = .
  14
  15 # keyboard dependent files
  16 SRC =   main.c \
  17         keymap.c \
  18         matrix.c \
  19         led.c
  20
  21 CONFIG_H = config_iwrap.h
  22
  23
  24 # V-USB debug level: To use ps2_usart.c level must be 0
  25 # ps2_usart.c requires USART to receive PS/2 signal.
  26 OPT_DEFS = -DDEBUG_LEVEL=0
  27
  28
  29 # MCU name, you MUST set this to match the board you are using
  30 # type "make clean" after changing this, so all files will be rebuilt
  31 MCU = atmega168p
  32 # avrdude doesn't know atmega168p
  33 AVRDUDE_MCU = atmega168
  34
  35
  36 # Processor frequency.
  37 #   Normally the first thing your program should do is set the clock prescaler,
  38 #   so your program will run at the correct speed.  You should also set this
  39 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  40 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  41 F_CPU = 12000000
  42
  43
  44 # Build Options
  45 #   comment out to disable the options.
  46 #
  47 MOUSEKEY_ENABLE = yes   # Mouse keys
  48 EXTRAKEY_ENABLE = yes   # Audio control and System control
  49 #NKRO_ENABLE = yes      # USB Nkey Rollover
  50
  51
  52
  53 #---------------- Programming Options --------------------------
  54 AVRDUDE = avrdude
  55 # Type: avrdude -c ? to get a full listing.
  56 AVRDUDE_PROGRAMMER = usbasp
  57 AVRDUDE_PORT =
  58 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  59 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  60
  61 # Uncomment the following if you want avrdude's erase cycle counter.
  62 # Note that this counter needs to be initialized first using -Yn,
  63 # see avrdude manual.
  64 #AVRDUDE_ERASE_COUNTER = -y
  65
  66 # Uncomment the following if you do /not/ wish a verification to be
  67 # performed after programming the device.
  68 #AVRDUDE_NO_VERIFY = -V
  69
  70 # Increase verbosity level.  Please use this when submitting bug
  71 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  72 # to submit bug reports.
  73 #AVRDUDE_VERBOSE = -v -v
  74
  75 #AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  76 AVRDUDE_FLAGS = -p $(AVRDUDE_MCU) -c $(AVRDUDE_PROGRAMMER)
  77 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  78 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  79 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  80
  81 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  82
  83
  84
  85 # Search Path
  86 VPATH = $(TARGET_DIR)
  87
  88 include $(TOP_DIR)/protocol/iwrap.mk
  89 # To be swatchable btween Bluetooth and USB. Comment out if you don't need USB.
  90 include $(TOP_DIR)/protocol/vusb.mk
  91 include $(TOP_DIR)/protocol.mk
  92 include $(TOP_DIR)/common.mk
  93 include $(TOP_DIR)/rules.mk