keyboard/stm32_f072_onekey/halconf.h

   1 /*
   2     ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
   3
   4     Licensed under the Apache License, Version 2.0 (the "License");
   5     you may not use this file except in compliance with the License.
   6     You may obtain a copy of the License at
   7
   8         http://www.apache.org/licenses/LICENSE-2.0
   9
  10     Unless required by applicable law or agreed to in writing, software
  11     distributed under the License is distributed on an "AS IS" BASIS,
  12     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  13     See the License for the specific language governing permissions and
  14     limitations under the License.
  15 */
  16
  17 /**
  18  * @file    templates/halconf.h
  19  * @brief   HAL configuration header.
  20  * @details HAL configuration file, this file allows to enable or disable the
  21  *          various device drivers from your application. You may also use
  22  *          this file in order to override the device drivers default settings.
  23  *
  24  * @addtogroup HAL_CONF
  25  * @{
  26  */
  27
  28 #ifndef _HALCONF_H_
  29 #define _HALCONF_H_
  30
  31 #include "mcuconf.h"
  32
  33 /**
  34  * @brief   Enables the PAL subsystem.
  35  */
  36 #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
  37 #define HAL_USE_PAL                 TRUE
  38 #endif
  39
  40 /**
  41  * @brief   Enables the ADC subsystem.
  42  */
  43 #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
  44 #define HAL_USE_ADC                 FALSE
  45 #endif
  46
  47 /**
  48  * @brief   Enables the CAN subsystem.
  49  */
  50 #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
  51 #define HAL_USE_CAN                 FALSE
  52 #endif
  53
  54 /**
  55  * @brief   Enables the DAC subsystem.
  56  */
  57 #if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
  58 #define HAL_USE_DAC                 FALSE
  59 #endif
  60
  61 /**
  62  * @brief   Enables the EXT subsystem.
  63  */
  64 #if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
  65 #define HAL_USE_EXT                 FALSE
  66 #endif
  67
  68 /**
  69  * @brief   Enables the GPT subsystem.
  70  */
  71 #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
  72 #define HAL_USE_GPT                 FALSE
  73 #endif
  74
  75 /**
  76  * @brief   Enables the I2C subsystem.
  77  */
  78 #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
  79 #define HAL_USE_I2C                 FALSE
  80 #endif
  81
  82 /**
  83  * @brief   Enables the I2S subsystem.
  84  */
  85 #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
  86 #define HAL_USE_I2S                 FALSE
  87 #endif
  88
  89 /**
  90  * @brief   Enables the ICU subsystem.
  91  */
  92 #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
  93 #define HAL_USE_ICU                 FALSE
  94 #endif
  95
  96 /**
  97  * @brief   Enables the MAC subsystem.
  98  */
  99 #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
 100 #define HAL_USE_MAC                 FALSE
 101 #endif
 102
 103 /**
 104  * @brief   Enables the MMC_SPI subsystem.
 105  */
 106 #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
 107 #define HAL_USE_MMC_SPI             FALSE
 108 #endif
 109
 110 /**
 111  * @brief   Enables the PWM subsystem.
 112  */
 113 #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
 114 #define HAL_USE_PWM                 FALSE
 115 #endif
 116
 117 /**
 118  * @brief   Enables the RTC subsystem.
 119  */
 120 #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
 121 #define HAL_USE_RTC                 FALSE
 122 #endif
 123
 124 /**
 125  * @brief   Enables the SDC subsystem.
 126  */
 127 #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
 128 #define HAL_USE_SDC                 FALSE
 129 #endif
 130
 131 /**
 132  * @brief   Enables the SERIAL subsystem.
 133  */
 134 #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
 135 #define HAL_USE_SERIAL              FALSE
 136 #endif
 137
 138 /**
 139  * @brief   Enables the SERIAL over USB subsystem.
 140  */
 141 #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
 142 #define HAL_USE_SERIAL_USB          FALSE
 143 #endif
 144
 145 /**
 146  * @brief   Enables the SPI subsystem.
 147  */
 148 #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
 149 #define HAL_USE_SPI                 FALSE
 150 #endif
 151
 152 /**
 153  * @brief   Enables the UART subsystem.
 154  */
 155 #if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
 156 #define HAL_USE_UART                FALSE
 157 #endif
 158
 159 /**
 160  * @brief   Enables the USB subsystem.
 161  */
 162 #if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
 163 #define HAL_USE_USB                 TRUE
 164 #endif
 165
 166 /**
 167  * @brief   Enables the WDG subsystem.
 168  */
 169 #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
 170 #define HAL_USE_WDG                 FALSE
 171 #endif
 172
 173 /*===========================================================================*/
 174 /* ADC driver related settings.                                              */
 175 /*===========================================================================*/
 176
 177 /**
 178  * @brief   Enables synchronous APIs.
 179  * @note    Disabling this option saves both code and data space.
 180  */
 181 #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
 182 #define ADC_USE_WAIT                TRUE
 183 #endif
 184
 185 /**
 186  * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
 187  * @note    Disabling this option saves both code and data space.
 188  */
 189 #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 190 #define ADC_USE_MUTUAL_EXCLUSION    TRUE
 191 #endif
 192
 193 /*===========================================================================*/
 194 /* CAN driver related settings.                                              */
 195 /*===========================================================================*/
 196
 197 /**
 198  * @brief   Sleep mode related APIs inclusion switch.
 199  */
 200 #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
 201 #define CAN_USE_SLEEP_MODE          TRUE
 202 #endif
 203
 204 /*===========================================================================*/
 205 /* I2C driver related settings.                                              */
 206 /*===========================================================================*/
 207
 208 /**
 209  * @brief   Enables the mutual exclusion APIs on the I2C bus.
 210  */
 211 #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 212 #define I2C_USE_MUTUAL_EXCLUSION    TRUE
 213 #endif
 214
 215 /*===========================================================================*/
 216 /* MAC driver related settings.                                              */
 217 /*===========================================================================*/
 218
 219 /**
 220  * @brief   Enables an event sources for incoming packets.
 221  */
 222 #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
 223 #define MAC_USE_ZERO_COPY           FALSE
 224 #endif
 225
 226 /**
 227  * @brief   Enables an event sources for incoming packets.
 228  */
 229 #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
 230 #define MAC_USE_EVENTS              TRUE
 231 #endif
 232
 233 /*===========================================================================*/
 234 /* MMC_SPI driver related settings.                                          */
 235 /*===========================================================================*/
 236
 237 /**
 238  * @brief   Delays insertions.
 239  * @details If enabled this options inserts delays into the MMC waiting
 240  *          routines releasing some extra CPU time for the threads with
 241  *          lower priority, this may slow down the driver a bit however.
 242  *          This option is recommended also if the SPI driver does not
 243  *          use a DMA channel and heavily loads the CPU.
 244  */
 245 #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
 246 #define MMC_NICE_WAITING            TRUE
 247 #endif
 248
 249 /*===========================================================================*/
 250 /* SDC driver related settings.                                              */
 251 /*===========================================================================*/
 252
 253 /**
 254  * @brief   Number of initialization attempts before rejecting the card.
 255  * @note    Attempts are performed at 10mS intervals.
 256  */
 257 #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
 258 #define SDC_INIT_RETRY              100
 259 #endif
 260
 261 /**
 262  * @brief   Include support for MMC cards.
 263  * @note    MMC support is not yet implemented so this option must be kept
 264  *          at @p FALSE.
 265  */
 266 #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
 267 #define SDC_MMC_SUPPORT             FALSE
 268 #endif
 269
 270 /**
 271  * @brief   Delays insertions.
 272  * @details If enabled this options inserts delays into the MMC waiting
 273  *          routines releasing some extra CPU time for the threads with
 274  *          lower priority, this may slow down the driver a bit however.
 275  */
 276 #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
 277 #define SDC_NICE_WAITING            TRUE
 278 #endif
 279
 280 /*===========================================================================*/
 281 /* SERIAL driver related settings.                                           */
 282 /*===========================================================================*/
 283
 284 /**
 285  * @brief   Default bit rate.
 286  * @details Configuration parameter, this is the baud rate selected for the
 287  *          default configuration.
 288  */
 289 #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
 290 #define SERIAL_DEFAULT_BITRATE      38400
 291 #endif
 292
 293 /**
 294  * @brief   Serial buffers size.
 295  * @details Configuration parameter, you can change the depth of the queue
 296  *          buffers depending on the requirements of your application.
 297  * @note    The default is 64 bytes for both the transmission and receive
 298  *          buffers.
 299  */
 300 #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
 301 #define SERIAL_BUFFERS_SIZE         16
 302 #endif
 303
 304 /*===========================================================================*/
 305 /* SERIAL_USB driver related setting.                                        */
 306 /*===========================================================================*/
 307
 308 /**
 309  * @brief   Serial over USB buffers size.
 310  * @details Configuration parameter, the buffer size must be a multiple of
 311  *          the USB data endpoint maximum packet size.
 312  * @note    The default is 64 bytes for both the transmission and receive
 313  *          buffers.
 314  */
 315 #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
 316 #define SERIAL_USB_BUFFERS_SIZE     256
 317 #endif
 318
 319 /*===========================================================================*/
 320 /* SPI driver related settings.                                              */
 321 /*===========================================================================*/
 322
 323 /**
 324  * @brief   Enables synchronous APIs.
 325  * @note    Disabling this option saves both code and data space.
 326  */
 327 #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
 328 #define SPI_USE_WAIT                TRUE
 329 #endif
 330
 331 /**
 332  * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
 333  * @note    Disabling this option saves both code and data space.
 334  */
 335 #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
 336 #define SPI_USE_MUTUAL_EXCLUSION    TRUE
 337 #endif
 338
 339 #endif /* _HALCONF_H_ */
 340
 341 /** @} */