protocol/lufa/LUFA-git/LUFA/Drivers/USB/Core/Device.h

   1 /*
   2              LUFA Library
   3      Copyright (C) Dean Camera, 2014.
   4
   5   dean [at] fourwalledcubicle [dot] com
   6            www.lufa-lib.org
   7 */
   8
   9 /*
  10   Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
  11
  12   Permission to use, copy, modify, distribute, and sell this
  13   software and its documentation for any purpose is hereby granted
  14   without fee, provided that the above copyright notice appear in
  15   all copies and that both that the copyright notice and this
  16   permission notice and warranty disclaimer appear in supporting
  17   documentation, and that the name of the author not be used in
  18   advertising or publicity pertaining to distribution of the
  19   software without specific, written prior permission.
  20
  21   The author disclaims all warranties with regard to this
  22   software, including all implied warranties of merchantability
  23   and fitness.  In no event shall the author be liable for any
  24   special, indirect or consequential damages or any damages
  25   whatsoever resulting from loss of use, data or profits, whether
  26   in an action of contract, negligence or other tortious action,
  27   arising out of or in connection with the use or performance of
  28   this software.
  29 */
  30
  31 /** \file
  32  *  \brief Common USB Device definitions for all architectures.
  33  *  \copydetails Group_Device
  34  *
  35  *  \note This file should not be included directly. It is automatically included as needed by the USB driver
  36  *        dispatch header located in LUFA/Drivers/USB/USB.h.
  37  */
  38
  39 /** \ingroup Group_USB
  40  *  \defgroup Group_Device Device Management
  41  *  \brief USB Device management definitions for USB device mode.
  42  *
  43  *  USB Device mode related definitions common to all architectures. This module contains definitions which
  44  *  are used when the USB controller is initialized in device mode.
  45  *
  46  *  @{
  47  */
  48
  49 #ifndef __USBDEVICE_H__
  50 #define __USBDEVICE_H__
  51
  52         /* Includes: */
  53                 #include "../../../Common/Common.h"
  54                 #include "USBMode.h"
  55                 #include "StdDescriptors.h"
  56                 #include "USBInterrupt.h"
  57                 #include "Endpoint.h"
  58
  59         /* Enable C linkage for C++ Compilers: */
  60                 #if defined(__cplusplus)
  61                         extern "C" {
  62                 #endif
  63
  64         /* Preprocessor Checks: */
  65                 #if !defined(__INCLUDE_FROM_USB_DRIVER)
  66                         #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
  67                 #endif
  68
  69         /* Public Interface - May be used in end-application: */
  70                 /* Enums: */
  71                         /** Enum for the various states of the USB Device state machine. Only some states are
  72                          *  implemented in the LUFA library - other states are left to the user to implement.
  73                          *
  74                          *  For information on each possible USB device state, refer to the USB 2.0 specification.
  75                          *
  76                          *  \see \ref USB_DeviceState, which stores the current device state machine state.
  77                          */
  78                         enum USB_Device_States_t
  79                         {
  80                                 DEVICE_STATE_Unattached                   = 0, /**< Internally implemented by the library. This state indicates
  81                                                                                 *   that the device is not currently connected to a host.
  82                                                                                 */
  83                                 DEVICE_STATE_Powered                      = 1, /**< Internally implemented by the library. This state indicates
  84                                                                                 *   that the device is connected to a host, but enumeration has not
  85                                                                                 *   yet begun.
  86                                                                                 */
  87                                 DEVICE_STATE_Default                      = 2, /**< Internally implemented by the library. This state indicates
  88                                                                                 *   that the device's USB bus has been reset by the host and it is
  89                                                                                 *   now waiting for the host to begin the enumeration process.
  90                                                                                 */
  91                                 DEVICE_STATE_Addressed                    = 3, /**< Internally implemented by the library. This state indicates
  92                                                                                 *   that the device has been addressed by the USB Host, but is not
  93                                                                                 *   yet configured.
  94                                                                                 */
  95                                 DEVICE_STATE_Configured                   = 4, /**< May be implemented by the user project. This state indicates
  96                                                                                 *   that the device has been enumerated by the host and is ready
  97                                                                                 *   for USB communications to begin.
  98                                                                                 */
  99                                 DEVICE_STATE_Suspended                    = 5, /**< May be implemented by the user project. This state indicates
 100                                                                                 *   that the USB bus has been suspended by the host, and the device
 101                                                                                 *   should power down to a minimal power level until the bus is
 102                                                                                 *   resumed.
 103                                                                                 */
 104                         };
 105
 106                 /* Function Prototypes: */
 107                         /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
 108                          *  index and language ID. This function MUST be overridden in the user application (added with full, identical
 109                          *  prototype and name so that the library can call it to retrieve descriptor data.
 110                          *
 111                          *  \param[in] wValue                  The type of the descriptor to retrieve in the upper byte, and the index in the
 112                          *                                     lower byte (when more than one descriptor of the given type exists, such as the
 113                          *                                     case of string descriptors). The type may be one of the standard types defined
 114                          *                                     in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
 115                          *  \param[in] wIndex                  The language ID of the string to return if the \c wValue type indicates
 116                          *                                     \ref DTYPE_String, otherwise zero for standard descriptors, or as defined in a
 117                          *                                     class-specific standards.
 118                          *  \param[out] DescriptorAddress      Pointer to the descriptor in memory. This should be set by the routine to
 119                          *                                     the address of the descriptor.
 120                          *  \param[out] DescriptorMemorySpace  A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory
 121                          *                                     space in which the descriptor is stored. This parameter does not exist when one
 122                          *                                     of the \c USE_*_DESCRIPTORS compile time options is used, or on architectures which
 123                          *                                     use a unified address space.
 124                          *
 125                          *  \note By default, the library expects all descriptors to be located in flash memory via the \c PROGMEM attribute.
 126                          *        If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to
 127                          *        allow the descriptors to be changed dynamically at runtime) either the \c USE_RAM_DESCRIPTORS or the
 128                          *        \c USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D
 129                          *        switch.
 130                          *
 131                          *  \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise.
 132                          */
 133                         uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 134                                                             const uint8_t wIndex,
 135                                                             const void** const DescriptorAddress
 136                         #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)) && \
 137                             !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
 138                                                             , uint8_t* const DescriptorMemorySpace
 139                         #endif
 140                                                             ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 141
 142         /* Architecture Includes: */
 143                 #if (ARCH == ARCH_AVR8)
 144                         #include "AVR8/Device_AVR8.h"
 145                 #elif (ARCH == ARCH_UC3)
 146                         #include "UC3/Device_UC3.h"
 147                 #elif (ARCH == ARCH_XMEGA)
 148                         #include "XMEGA/Device_XMEGA.h"
 149                 #endif
 150
 151         /* Disable C linkage for C++ Compilers: */
 152                 #if defined(__cplusplus)
 153                         }
 154                 #endif
 155
 156 #endif
 157
 158 /** @} */
 159