protocol/lufa/LUFA-git/Projects/Webserver/Lib/uip/uipopt.h

   1 /**
   2  * \addtogroup uip
   3  * @{
   4  */
   5
   6 /**
   7  * \defgroup uipopt Configuration options for uIP
   8  * @{
   9  *
  10  * uIP is configured using the per-project configuration file
  11  * "uipopt.h". This file contains all compile-time options for uIP and
  12  * should be tweaked to match each specific project. The uIP
  13  * distribution contains a documented example "uipopt.h" that can be
  14  * copied and modified for each project.
  15  */
  16
  17 /**
  18  * \file
  19  * Configuration options for uIP.
  20  * \author Adam Dunkels <adam@dunkels.com>
  21  *
  22  * This file is used for tweaking various configuration options for
  23  * uIP. You should make a copy of this file into one of your project's
  24  * directories instead of editing this example "uipopt.h" file that
  25  * comes with the uIP distribution.
  26  */
  27
  28 /*
  29  * Copyright (c) 2001-2003, Adam Dunkels.
  30  * All rights reserved.
  31  *
  32  * Redistribution and use in source and binary forms, with or without
  33  * modification, are permitted provided that the following conditions
  34  * are met:
  35  * 1. Redistributions of source code must retain the above copyright
  36  *    notice, this list of conditions and the following disclaimer.
  37  * 2. Redistributions in binary form must reproduce the above copyright
  38  *    notice, this list of conditions and the following disclaimer in the
  39  *    documentation and/or other materials provided with the distribution.
  40  * 3. The name of the author may not be used to endorse or promote
  41  *    products derived from this software without specific prior
  42  *    written permission.
  43  *
  44  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
  45  * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  46  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  47  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  48  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  49  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
  50  * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  51  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
  52  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  53  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  54  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  55  *
  56  * This file is part of the uIP TCP/IP stack.
  57  *
  58  * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $
  59  *
  60  */
  61
  62 #ifndef __UIPOPT_H__
  63 #define __UIPOPT_H__
  64
  65 #include "Config/AppConfig.h"
  66
  67 #ifndef UIP_LITTLE_ENDIAN
  68 #define UIP_LITTLE_ENDIAN  3412
  69 #endif /* UIP_LITTLE_ENDIAN */
  70 #ifndef UIP_BIG_ENDIAN
  71 #define UIP_BIG_ENDIAN     1234
  72 #endif /* UIP_BIG_ENDIAN */
  73
  74 /*------------------------------------------------------------------------------*/
  75
  76 /**
  77  * \defgroup uipoptstaticconf Static configuration options
  78  * @{
  79  *
  80  * These configuration options can be used for setting the IP address
  81  * settings statically, but only if UIP_FIXEDADDR is set to 1. The
  82  * configuration options for a specific node includes IP address,
  83  * netmask and default router as well as the Ethernet address. The
  84  * netmask, default router and Ethernet address are applicable only
  85  * if uIP should be run over Ethernet.
  86  *
  87  * This options are meaningful only for the IPv4 code.
  88  *
  89  * All of these should be changed to suit your project.
  90  */
  91
  92 /**
  93  * Determines if uIP should use a fixed IP address or not.
  94  *
  95  * If uIP should use a fixed IP address, the settings are set in the
  96  * uipopt.h file. If not, the macros uip_sethostaddr(),
  97  * uip_setdraddr() and uip_setnetmask() should be used instead.
  98  *
  99  * \hideinitializer
 100  */
 101 #define UIP_FIXEDADDR    0
 102
 103 /**
 104  * Ping IP address assignment.
 105  *
 106  * uIP uses a "ping" packets for setting its own IP address if this
 107  * option is set. If so, uIP will start with an empty IP address and
 108  * the destination IP address of the first incoming "ping" (ICMP echo)
 109  * packet will be used for setting the hosts IP address.
 110  *
 111  * \note This works only if UIP_FIXEDADDR is 0.
 112  *
 113  * \hideinitializer
 114  */
 115 #ifdef UIP_CONF_PINGADDRCONF
 116 #define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF
 117 #else /* UIP_CONF_PINGADDRCONF */
 118 #define UIP_PINGADDRCONF 0
 119 #endif /* UIP_CONF_PINGADDRCONF */
 120
 121
 122 /**
 123  * Specifies if the uIP ARP module should be compiled with a fixed
 124  * Ethernet MAC address or not.
 125  *
 126  * If this configuration option is 0, the macro uip_setethaddr() can
 127  * be used to specify the Ethernet address at run-time.
 128  *
 129  * \hideinitializer
 130  */
 131 #define UIP_FIXEDETHADDR 0
 132
 133 /** @} */
 134 /*------------------------------------------------------------------------------*/
 135 /**
 136  * \defgroup uipoptip IP configuration options
 137  * @{
 138  *
 139  */
 140 /**
 141  * The IP TTL (time to live) of IP packets sent by uIP.
 142  *
 143  * This should normally not be changed.
 144  */
 145 #define UIP_TTL         64
 146
 147 /**
 148  * The maximum time an IP fragment should wait in the reassembly
 149  * buffer before it is dropped.
 150  *
 151  */
 152 #define UIP_REASS_MAXAGE 60 /*60s*/
 153
 154 /**
 155  * Turn on support for IP packet reassembly.
 156  *
 157  * uIP supports reassembly of fragmented IP packets. This features
 158  * requires an additional amount of RAM to hold the reassembly buffer
 159  * and the reassembly code size is approximately 700 bytes.  The
 160  * reassembly buffer is of the same size as the uip_buf buffer
 161  * (configured by UIP_BUFSIZE).
 162  *
 163  * \note IP packet reassembly is not heavily tested.
 164  *
 165  * \hideinitializer
 166  */
 167 #ifdef UIP_CONF_REASSEMBLY
 168 #define UIP_REASSEMBLY UIP_CONF_REASSEMBLY
 169 #else /* UIP_CONF_REASSEMBLY */
 170 #define UIP_REASSEMBLY 0
 171 #endif /* UIP_CONF_REASSEMBLY */
 172 /** @} */
 173
 174 /*------------------------------------------------------------------------------*/
 175 /**
 176  * \defgroup uipoptipv6 IPv6 configuration options
 177  * @{
 178  *
 179  */
 180
 181 /** The maximum transmission unit at the IP Layer*/
 182 #define UIP_LINK_MTU 1280
 183
 184 #ifndef UIP_CONF_IPV6
 185 /** Do we use IPv6 or not (default: no) */
 186 #define UIP_CONF_IPV6                 0
 187 #endif
 188
 189 #ifndef UIP_CONF_IPV6_QUEUE_PKT
 190 /** Do we do per %neighbor queuing during address resolution (default: no) */
 191 #define UIP_CONF_IPV6_QUEUE_PKT       0
 192 #endif
 193
 194 #ifndef UIP_CONF_IPV6_CHECKS
 195 /** Do we do IPv6 consistency checks (highly recommended, default: yes) */
 196 #define UIP_CONF_IPV6_CHECKS          1
 197 #endif
 198
 199 #ifndef UIP_CONF_IPV6_REASSEMBLY
 200 /** Do we do IPv6 fragmentation (default: no) */
 201 #define UIP_CONF_IPV6_REASSEMBLY      0
 202 #endif
 203
 204 #ifndef UIP_CONF_NETIF_MAX_ADDRESSES
 205 /** Default number of IPv6 addresses associated to the node's interface */
 206 #define UIP_CONF_NETIF_MAX_ADDRESSES  3
 207 #endif
 208
 209 #ifndef UIP_CONF_ND6_MAX_PREFIXES
 210 /** Default number of IPv6 prefixes associated to the node's interface */
 211 #define UIP_CONF_ND6_MAX_PREFIXES     3
 212 #endif
 213
 214 #ifndef UIP_CONF_ND6_MAX_NEIGHBORS
 215 /** Default number of neighbors that can be stored in the %neighbor cache */
 216 #define UIP_CONF_ND6_MAX_NEIGHBORS    4
 217 #endif
 218
 219 #ifndef UIP_CONF_ND6_MAX_DEFROUTERS
 220 /** Minimum number of default routers */
 221 #define UIP_CONF_ND6_MAX_DEFROUTERS   2
 222 #endif
 223 /** @} */
 224
 225 /*------------------------------------------------------------------------------*/
 226 /**
 227  * \defgroup uipoptudp UDP configuration options
 228  * @{
 229  *
 230  * \note The UDP support in uIP is still not entirely complete; there
 231  * is no support for sending or receiving broadcast or multicast
 232  * packets, but it works well enough to support a number of vital
 233  * applications such as DNS queries, though
 234  */
 235
 236 /**
 237  * Toggles whether UDP support should be compiled in or not.
 238  *
 239  * \hideinitializer
 240  */
 241 #ifdef UIP_CONF_UDP
 242 #define UIP_UDP UIP_CONF_UDP
 243 #else /* UIP_CONF_UDP */
 244 #define UIP_UDP           1
 245 #endif /* UIP_CONF_UDP */
 246
 247 /**
 248  * Toggles if UDP checksums should be used or not.
 249  *
 250  * \note Support for UDP checksums is currently not included in uIP,
 251  * so this option has no function.
 252  *
 253  * \hideinitializer
 254  */
 255 #ifdef UIP_CONF_UDP_CHECKSUMS
 256 #define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS
 257 #else
 258 #define UIP_UDP_CHECKSUMS 0
 259 #endif
 260
 261 /**
 262  * The maximum amount of concurrent UDP connections.
 263  *
 264  * \hideinitializer
 265  */
 266 #ifdef UIP_CONF_UDP_CONNS
 267 #define UIP_UDP_CONNS UIP_CONF_UDP_CONNS
 268 #else /* UIP_CONF_UDP_CONNS */
 269 #define UIP_UDP_CONNS    10
 270 #endif /* UIP_CONF_UDP_CONNS */
 271
 272 /**
 273  * The name of the function that should be called when UDP datagrams arrive.
 274  *
 275  * \hideinitializer
 276  */
 277
 278
 279 /** @} */
 280 /*------------------------------------------------------------------------------*/
 281 /**
 282  * \defgroup uipopttcp TCP configuration options
 283  * @{
 284  */
 285
 286 /**
 287  * Toggles whether TCP support should be compiled in or not.
 288  *
 289  * \hideinitializer
 290  */
 291 #ifdef UIP_CONF_TCP
 292 #define UIP_TCP UIP_CONF_TCP
 293 #else /* UIP_CONF_TCP */
 294 #define UIP_TCP           1
 295 #endif /* UIP_CONF_TCP */
 296
 297 /**
 298  * Determines if support for opening connections from uIP should be
 299  * compiled in.
 300  *
 301  * If the applications that are running on top of uIP for this project
 302  * do not need to open outgoing TCP connections, this configuration
 303  * option can be turned off to reduce the code size of uIP.
 304  *
 305  * \hideinitializer
 306  */
 307 #ifndef UIP_CONF_ACTIVE_OPEN
 308 #define UIP_ACTIVE_OPEN 1
 309 #else /* UIP_CONF_ACTIVE_OPEN */
 310 #define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN
 311 #endif /* UIP_CONF_ACTIVE_OPEN */
 312
 313 /**
 314  * The maximum number of simultaneously open TCP connections.
 315  *
 316  * Since the TCP connections are statically allocated, turning this
 317  * configuration knob down results in less RAM used. Each TCP
 318  * connection requires approximately 30 bytes of memory.
 319  *
 320  * \hideinitializer
 321  */
 322 #ifndef UIP_CONF_MAX_CONNECTIONS
 323 #define UIP_CONNS       10
 324 #else /* UIP_CONF_MAX_CONNECTIONS */
 325 #define UIP_CONNS UIP_CONF_MAX_CONNECTIONS
 326 #endif /* UIP_CONF_MAX_CONNECTIONS */
 327
 328
 329 /**
 330  * The maximum number of simultaneously listening TCP ports.
 331  *
 332  * Each listening TCP port requires 2 bytes of memory.
 333  *
 334  * \hideinitializer
 335  */
 336 #ifndef UIP_CONF_MAX_LISTENPORTS
 337 #define UIP_LISTENPORTS 20
 338 #else /* UIP_CONF_MAX_LISTENPORTS */
 339 #define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS
 340 #endif /* UIP_CONF_MAX_LISTENPORTS */
 341
 342 /**
 343  * Determines if support for TCP urgent data notification should be
 344  * compiled in.
 345  *
 346  * Urgent data (out-of-band data) is a rarely used TCP feature that
 347  * very seldom would be required.
 348  *
 349  * \hideinitializer
 350  */
 351 #if !defined(UIP_URGDATA)
 352 #define UIP_URGDATA      0
 353 #endif
 354
 355 /**
 356  * The initial retransmission timeout counted in timer pulses.
 357  *
 358  * This should not be changed.
 359  */
 360 #if !defined(UIP_RTO)
 361 #define UIP_RTO         3
 362 #endif
 363
 364 /**
 365  * The maximum number of times a segment should be retransmitted
 366  * before the connection should be aborted.
 367  *
 368  * This should not be changed.
 369  */
 370 #if !defined(UIP_MAXRTX)
 371 #define UIP_MAXRTX      8
 372 #endif
 373
 374 /**
 375  * The maximum number of times a SYN segment should be retransmitted
 376  * before a connection request should be deemed to have been
 377  * unsuccessful.
 378  *
 379  * This should not need to be changed.
 380  */
 381 #if !defined(UIP_MAXSYNRTX)
 382 #define UIP_MAXSYNRTX      5
 383 #endif
 384
 385 /**
 386  * The TCP maximum segment size.
 387  *
 388  * This is should not be to set to more than
 389  * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN.
 390  */
 391 #ifdef UIP_CONF_TCP_MSS
 392 #define UIP_TCP_MSS UIP_CONF_TCP_MSS
 393 #else
 394 #define UIP_TCP_MSS     (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN)
 395 #endif
 396
 397 /**
 398  * The size of the advertised receiver's window.
 399  *
 400  * Should be set low (i.e., to the size of the uip_buf buffer) if the
 401  * application is slow to process incoming data, or high (32768 bytes)
 402  * if the application processes data quickly.
 403  *
 404  * \hideinitializer
 405  */
 406 #ifndef UIP_CONF_RECEIVE_WINDOW
 407 #define UIP_RECEIVE_WINDOW UIP_TCP_MSS
 408 #else
 409 #define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW
 410 #endif
 411
 412 /**
 413  * How long a connection should stay in the TIME_WAIT state.
 414  *
 415  * This configuration option has no real implication, and it should be
 416  * left untouched.
 417  */
 418 #define UIP_TIME_WAIT_TIMEOUT 120
 419
 420
 421 /** @} */
 422 /*------------------------------------------------------------------------------*/
 423 /**
 424  * \defgroup uipoptarp ARP configuration options
 425  * @{
 426  */
 427
 428 /**
 429  * The size of the ARP table.
 430  *
 431  * This option should be set to a larger value if this uIP node will
 432  * have many connections from the local network.
 433  *
 434  * \hideinitializer
 435  */
 436 #ifdef UIP_CONF_ARPTAB_SIZE
 437 #define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE
 438 #else
 439 #define UIP_ARPTAB_SIZE 8
 440 #endif
 441
 442 /**
 443  * The maximum age of ARP table entries measured in 10ths of seconds.
 444  *
 445  * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD
 446  * default).
 447  */
 448 #define UIP_ARP_MAXAGE 120
 449
 450
 451 /** @} */
 452
 453 /*------------------------------------------------------------------------------*/
 454
 455 /**
 456  * \defgroup uipoptmac layer 2 options (for ipv6)
 457  * @{
 458  */
 459
 460 #define UIP_DEFAULT_PREFIX_LEN 64
 461
 462 /** @} */
 463
 464 /*------------------------------------------------------------------------------*/
 465
 466 /**
 467  * \defgroup uipoptsics 6lowpan options (for ipv6)
 468  * @{
 469  */
 470 /**
 471  * Timeout for packet reassembly at the 6lowpan layer
 472  * (should be < 60s)
 473  */
 474 #ifdef SICSLOWPAN_CONF_MAXAGE
 475 #define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE
 476 #else
 477 #define SICSLOWPAN_REASS_MAXAGE 20
 478 #endif
 479
 480 /**
 481  * Do we compress the IP header or not (default: no)
 482  */
 483 #ifndef SICSLOWPAN_CONF_COMPRESSION
 484 #define SICSLOWPAN_CONF_COMPRESSION 0
 485 #endif
 486
 487 /**
 488  * If we use IPHC compression, how many address contexts do we support
 489  */
 490 #ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS
 491 #define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1
 492 #endif
 493
 494 /**
 495  * Do we support 6lowpan fragmentation
 496  */
 497 #ifndef SICSLOWPAN_CONF_FRAG
 498 #define SICSLOWPAN_CONF_FRAG  0
 499 #endif
 500
 501 /** @} */
 502
 503 /*------------------------------------------------------------------------------*/
 504
 505 /**
 506  * \defgroup uipoptgeneral General configuration options
 507  * @{
 508  */
 509
 510 /**
 511  * The size of the uIP packet buffer.
 512  *
 513  * The uIP packet buffer should not be smaller than 60 bytes, and does
 514  * not need to be larger than 1514 bytes. Lower size results in lower
 515  * TCP throughput, larger size results in higher TCP throughput.
 516  *
 517  * \hideinitializer
 518  */
 519 #ifndef UIP_CONF_BUFFER_SIZE
 520 #define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN
 521 #else /* UIP_CONF_BUFFER_SIZE */
 522 #define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE
 523 #endif /* UIP_CONF_BUFFER_SIZE */
 524
 525
 526 /**
 527  * Determines if statistics support should be compiled in.
 528  *
 529  * The statistics is useful for debugging and to show the user.
 530  *
 531  * \hideinitializer
 532  */
 533 #ifndef UIP_CONF_STATISTICS
 534 #define UIP_STATISTICS  0
 535 #else /* UIP_CONF_STATISTICS */
 536 #define UIP_STATISTICS UIP_CONF_STATISTICS
 537 #endif /* UIP_CONF_STATISTICS */
 538
 539 /**
 540  * Determines if logging of certain events should be compiled in.
 541  *
 542  * This is useful mostly for debugging. The function uip_log()
 543  * must be implemented to suit the architecture of the project, if
 544  * logging is turned on.
 545  *
 546  * \hideinitializer
 547  */
 548 #ifndef UIP_CONF_LOGGING
 549 #define UIP_LOGGING     0
 550 #else /* UIP_CONF_LOGGING */
 551 #define UIP_LOGGING     UIP_CONF_LOGGING
 552 #endif /* UIP_CONF_LOGGING */
 553
 554 /**
 555  * Broadcast support.
 556  *
 557  * This flag configures IP broadcast support. This is useful only
 558  * together with UDP.
 559  *
 560  * \hideinitializer
 561  *
 562  */
 563 #ifndef UIP_CONF_BROADCAST
 564 #define UIP_BROADCAST 0
 565 #else /* UIP_CONF_BROADCAST */
 566 #define UIP_BROADCAST UIP_CONF_BROADCAST
 567 #endif /* UIP_CONF_BROADCAST */
 568
 569 /**
 570  * Print out a uIP log message.
 571  *
 572  * This function must be implemented by the module that uses uIP, and
 573  * is called by uIP whenever a log message is generated.
 574  */
 575 void uip_log(char *msg);
 576
 577 /**
 578  * The link level header length.
 579  *
 580  * This is the offset into the uip_buf where the IP header can be
 581  * found. For Ethernet, this should be set to 14. For SLIP, this
 582  * should be set to 0.
 583  *
 584  * \note we probably won't use this constant for other link layers than
 585  * ethernet as they have variable header length (this is due to variable
 586  * number and type of address fields and to optional security features)
 587  * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14
 588  *       802.11 -> 4 + (6*3/4) + 2
 589  * \hideinitializer
 590  */
 591 #ifdef UIP_CONF_LLH_LEN
 592 #define UIP_LLH_LEN UIP_CONF_LLH_LEN
 593 #else /* UIP_LLH_LEN */
 594 #define UIP_LLH_LEN     14
 595 #endif /* UIP_CONF_LLH_LEN */
 596
 597 /** @} */
 598 /*------------------------------------------------------------------------------*/
 599 /**
 600  * \defgroup uipoptcpu CPU architecture configuration
 601  * @{
 602  *
 603  * The CPU architecture configuration is where the endianess of the
 604  * CPU on which uIP is to be run is specified. Most CPUs today are
 605  * little endian, and the most notable exception are the Motorolas
 606  * which are big endian. The BYTE_ORDER macro should be changed to
 607  * reflect the CPU architecture on which uIP is to be run.
 608  */
 609
 610 /**
 611  * The byte order of the CPU architecture on which uIP is to be run.
 612  *
 613  * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or
 614  * UIP_LITTLE_ENDIAN (Intel byte order).
 615  *
 616  * \hideinitializer
 617  */
 618 #ifdef UIP_CONF_BYTE_ORDER
 619 #define UIP_BYTE_ORDER     UIP_CONF_BYTE_ORDER
 620 #else /* UIP_CONF_BYTE_ORDER */
 621 #define UIP_BYTE_ORDER     UIP_LITTLE_ENDIAN
 622 #endif /* UIP_CONF_BYTE_ORDER */
 623
 624 /** @} */
 625 /*------------------------------------------------------------------------------*/
 626
 627 #include <ff.h>
 628 #include <stdbool.h>
 629 #include <stdint.h>
 630
 631 #include "timer.h"
 632
 633 typedef uint8_t u8_t;
 634 typedef uint16_t u16_t;
 635 typedef uint32_t u32_t;
 636 typedef uint32_t uip_stats_t;
 637
 638 /**
 639  * \defgroup uipoptapp Application specific configurations
 640  * @{
 641  *
 642  * An uIP application is implemented using a single application
 643  * function that is called by uIP whenever a TCP/IP event occurs. The
 644  * name of this function must be registered with uIP at compile time
 645  * using the UIP_APPCALL definition.
 646  *
 647  * uIP applications can store the application state within the
 648  * uip_conn structure by specifying the type of the application
 649  * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t.
 650  *
 651  * The file containing the definitions must be included in the
 652  * uipopt.h file.
 653  *
 654  * The following example illustrates how this can look.
 655  \code
 656
 657  void httpd_appcall(void);
 658  #define UIP_APPCALL     httpd_appcall
 659
 660  struct httpd_state {
 661  u8_t state;
 662  u16_t count;
 663  char *dataptr;
 664  char *script;
 665  };
 666  typedef struct httpd_state uip_tcp_appstate_t
 667  \endcode
 668 */
 669 #define UIP_UDP_APPCALL uIPManagement_UDPCallback
 670 void UIP_UDP_APPCALL(void);
 671
 672 /**
 673  * \var #define UIP_APPCALL
 674  *
 675  * The name of the application function that uIP should call in
 676  * response to TCP/IP events.
 677  *
 678  */
 679 #define UIP_APPCALL     uIPManagement_TCPCallback
 680 void UIP_APPCALL(void);
 681
 682 /**
 683  * \var typedef uip_tcp_appstate_t
 684  *
 685  * The type of the application state that is to be stored in the
 686  * uip_conn structure. This usually is typedef:ed to a struct holding
 687  * application state information.
 688  */
 689 typedef union
 690 {
 691         struct
 692         {
 693                 uint8_t  CurrentState;
 694                 uint8_t  NextState;
 695
 696                 char     FileName[MAX_URI_LENGTH];
 697                 FIL      FileHandle;
 698                 bool     FileOpen;
 699                 uint32_t ACKedFilePos;
 700                 uint16_t SentChunkSize;
 701         } HTTPServer;
 702
 703         struct
 704         {
 705                 uint8_t  CurrentState;
 706                 uint8_t  NextState;
 707
 708                 uint8_t  IssuedCommand;
 709         } TELNETServer;
 710 } uip_tcp_appstate_t;
 711
 712 /**
 713  * \var typedef uip_udp_appstate_t
 714  *
 715  * The type of the application state that is to be stored in the
 716  * uip_conn structure. This usually is typedef:ed to a struct holding
 717  * application state information.
 718  */
 719 typedef union
 720 {
 721         struct
 722         {
 723                 uint8_t      CurrentState;
 724                 struct timer Timeout;
 725
 726                 struct
 727                 {
 728                         uint8_t AllocatedIP[4];
 729                         uint8_t Netmask[4];
 730                         uint8_t GatewayIP[4];
 731                         uint8_t ServerIP[4];
 732                 } DHCPOffer_Data;
 733         } DHCPClient;
 734 } uip_udp_appstate_t;
 735 /** @} */
 736
 737 #endif /* __UIPOPT_H__ */
 738 /** @} */
 739 /** @} */
 740