]> git.gir.st - tmk_keyboard.git/blob - protocol/usb_hid/USB_Host_Shield_2.0/SPP.cpp
git://git.gir.st / tmk_keyboard.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Squashed 'tmk_core/' changes from caca2c0..dc0e46e
[tmk_keyboard.git] / protocol / usb_hid / USB_Host_Shield_2.0 / SPP.cpp
1 /* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
2
3 This software may be distributed and modified under the terms of the GNU
4 General Public License version 2 (GPL2) as published by the Free Software
5 Foundation and appearing in the file GPL2.TXT included in the packaging of
6 this file. Please note that GPL2 Section 2[b] requires that all works based
7 on this software must also be made publicly available under the terms of
8 the GPL2 ("Copyleft").
9
10 Contact information
11 -------------------
12
13 Kristian Lauszus, TKJ Electronics
14 Web : http://www.tkjelectronics.com
15 e-mail : kristianl@tkjelectronics.com
16 */
17
18 #include "SPP.h"
19 // To enable serial debugging see "settings.h"
20 //#define EXTRADEBUG // Uncomment to get even more debugging data
21 //#define PRINTREPORT // Uncomment to print the report sent to the Arduino
22
23 /*
24 * CRC (reversed crc) lookup table as calculated by the table generator in ETSI TS 101 369 V6.3.0.
25 */
26 const uint8_t rfcomm_crc_table[256] PROGMEM = {/* reversed, 8-bit, poly=0x07 */
27 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
28 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
29 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
30 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
31 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
32 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
33 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
34 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
35 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
36 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
37 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
38 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
39 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
40 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
41 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
42 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
43 };
44
45 SPP::SPP(BTD *p, const char* name, const char* pin) :
46 BluetoothService(p) // Pointer to BTD class instance - mandatory
47 {
48 pBtd->btdName = name;
49 pBtd->btdPin = pin;
50
51 /* Set device cid for the SDP and RFCOMM channelse */
52 sdp_dcid[0] = 0x50; // 0x0050
53 sdp_dcid[1] = 0x00;
54 rfcomm_dcid[0] = 0x51; // 0x0051
55 rfcomm_dcid[1] = 0x00;
56
57 Reset();
58 }
59
60 void SPP::Reset() {
61 connected = false;
62 RFCOMMConnected = false;
63 SDPConnected = false;
64 waitForLastCommand = false;
65 l2cap_sdp_state = L2CAP_SDP_WAIT;
66 l2cap_rfcomm_state = L2CAP_RFCOMM_WAIT;
67 l2cap_event_flag = 0;
68 sppIndex = 0;
69 creditSent = false;
70 }
71
72 void SPP::disconnect() {
73 connected = false;
74 // First the two L2CAP channels has to be disconnected and then the HCI connection
75 if(RFCOMMConnected)
76 pBtd->l2cap_disconnection_request(hci_handle, ++identifier, rfcomm_scid, rfcomm_dcid);
77 if(RFCOMMConnected && SDPConnected)
78 delay(1); // Add delay between commands
79 if(SDPConnected)
80 pBtd->l2cap_disconnection_request(hci_handle, ++identifier, sdp_scid, sdp_dcid);
81 l2cap_sdp_state = L2CAP_DISCONNECT_RESPONSE;
82 }
83
84 void SPP::ACLData(uint8_t* l2capinbuf) {
85 if(!connected) {
86 if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
87 if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == SDP_PSM && !pBtd->sdpConnectionClaimed) {
88 pBtd->sdpConnectionClaimed = true;
89 hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
90 l2cap_sdp_state = L2CAP_SDP_WAIT; // Reset state
91 } else if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == RFCOMM_PSM && !pBtd->rfcommConnectionClaimed) {
92 pBtd->rfcommConnectionClaimed = true;
93 hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
94 l2cap_rfcomm_state = L2CAP_RFCOMM_WAIT; // Reset state
95 }
96 }
97 }
98
99 if(checkHciHandle(l2capinbuf, hci_handle)) { // acl_handle_ok
100 if((l2capinbuf[6] | (l2capinbuf[7] << 8)) == 0x0001U) { // l2cap_control - Channel ID for ACL-U
101 if(l2capinbuf[8] == L2CAP_CMD_COMMAND_REJECT) {
102 #ifdef DEBUG_USB_HOST
103 Notify(PSTR("\r\nL2CAP Command Rejected - Reason: "), 0x80);
104 D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
105 Notify(PSTR(" "), 0x80);
106 D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
107 Notify(PSTR(" Data: "), 0x80);
108 D_PrintHex<uint8_t > (l2capinbuf[17], 0x80);
109 Notify(PSTR(" "), 0x80);
110 D_PrintHex<uint8_t > (l2capinbuf[16], 0x80);
111 Notify(PSTR(" "), 0x80);
112 D_PrintHex<uint8_t > (l2capinbuf[15], 0x80);
113 Notify(PSTR(" "), 0x80);
114 D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
115 #endif
116 } else if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
117 #ifdef EXTRADEBUG
118 Notify(PSTR("\r\nL2CAP Connection Request - PSM: "), 0x80);
119 D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
120 Notify(PSTR(" "), 0x80);
121 D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
122 Notify(PSTR(" SCID: "), 0x80);
123 D_PrintHex<uint8_t > (l2capinbuf[15], 0x80);
124 Notify(PSTR(" "), 0x80);
125 D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
126 Notify(PSTR(" Identifier: "), 0x80);
127 D_PrintHex<uint8_t > (l2capinbuf[9], 0x80);
128 #endif
129 if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == SDP_PSM) { // It doesn't matter if it receives another reqeust, since it waits for the channel to disconnect in the L2CAP_SDP_DONE state, and the l2cap_event_flag will be cleared if so
130 identifier = l2capinbuf[9];
131 sdp_scid[0] = l2capinbuf[14];
132 sdp_scid[1] = l2capinbuf[15];
133 l2cap_set_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST);
134 } else if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == RFCOMM_PSM) { // ----- || -----
135 identifier = l2capinbuf[9];
136 rfcomm_scid[0] = l2capinbuf[14];
137 rfcomm_scid[1] = l2capinbuf[15];
138 l2cap_set_flag(L2CAP_FLAG_CONNECTION_RFCOMM_REQUEST);
139 }
140 } else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_RESPONSE) {
141 if((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) { // Success
142 if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) {
143 //Notify(PSTR("\r\nSDP Configuration Complete"), 0x80);
144 l2cap_set_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS);
145 } else if(l2capinbuf[12] == rfcomm_dcid[0] && l2capinbuf[13] == rfcomm_dcid[1]) {
146 //Notify(PSTR("\r\nRFCOMM Configuration Complete"), 0x80);
147 l2cap_set_flag(L2CAP_FLAG_CONFIG_RFCOMM_SUCCESS);
148 }
149 }
150 } else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_REQUEST) {
151 if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) {
152 //Notify(PSTR("\r\nSDP Configuration Request"), 0x80);
153 pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], sdp_scid);
154 } else if(l2capinbuf[12] == rfcomm_dcid[0] && l2capinbuf[13] == rfcomm_dcid[1]) {
155 //Notify(PSTR("\r\nRFCOMM Configuration Request"), 0x80);
156 pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], rfcomm_scid);
157 }
158 } else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_REQUEST) {
159 if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) {
160 //Notify(PSTR("\r\nDisconnect Request: SDP Channel"), 0x80);
161 identifier = l2capinbuf[9];
162 l2cap_set_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST);
163 } else if(l2capinbuf[12] == rfcomm_dcid[0] && l2capinbuf[13] == rfcomm_dcid[1]) {
164 //Notify(PSTR("\r\nDisconnect Request: RFCOMM Channel"), 0x80);
165 identifier = l2capinbuf[9];
166 l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RFCOMM_REQUEST);
167 }
168 } else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_RESPONSE) {
169 if(l2capinbuf[12] == sdp_scid[0] && l2capinbuf[13] == sdp_scid[1]) {
170 //Notify(PSTR("\r\nDisconnect Response: SDP Channel"), 0x80);
171 identifier = l2capinbuf[9];
172 l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RESPONSE);
173 } else if(l2capinbuf[12] == rfcomm_scid[0] && l2capinbuf[13] == rfcomm_scid[1]) {
174 //Notify(PSTR("\r\nDisconnect Response: RFCOMM Channel"), 0x80);
175 identifier = l2capinbuf[9];
176 l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RESPONSE);
177 }
178 } else if(l2capinbuf[8] == L2CAP_CMD_INFORMATION_REQUEST) {
179 #ifdef DEBUG_USB_HOST
180 Notify(PSTR("\r\nInformation request"), 0x80);
181 #endif
182 identifier = l2capinbuf[9];
183 pBtd->l2cap_information_response(hci_handle, identifier, l2capinbuf[12], l2capinbuf[13]);
184 }
185 #ifdef EXTRADEBUG
186 else {
187 Notify(PSTR("\r\nL2CAP Unknown Signaling Command: "), 0x80);
188 D_PrintHex<uint8_t > (l2capinbuf[8], 0x80);
189 }
190 #endif
191 } else if(l2capinbuf[6] == sdp_dcid[0] && l2capinbuf[7] == sdp_dcid[1]) { // SDP
192 if(l2capinbuf[8] == SDP_SERVICE_SEARCH_ATTRIBUTE_REQUEST_PDU) {
193 if(((l2capinbuf[16] << 8 | l2capinbuf[17]) == SERIALPORT_UUID) || ((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000 && (l2capinbuf[18] << 8 | l2capinbuf[19]) == SERIALPORT_UUID)) { // Check if it's sending the full UUID, see: https://www.bluetooth.org/Technical/AssignedNumbers/service_discovery.htm, we will just check the first four bytes
194 if(firstMessage) {
195 serialPortResponse1(l2capinbuf[9], l2capinbuf[10]);
196 firstMessage = false;
197 } else {
198 serialPortResponse2(l2capinbuf[9], l2capinbuf[10]); // Serialport continuation state
199 firstMessage = true;
200 }
201 } else if(((l2capinbuf[16] << 8 | l2capinbuf[17]) == L2CAP_UUID) || ((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000 && (l2capinbuf[18] << 8 | l2capinbuf[19]) == L2CAP_UUID)) {
202 if(firstMessage) {
203 l2capResponse1(l2capinbuf[9], l2capinbuf[10]);
204 firstMessage = false;
205 } else {
206 l2capResponse2(l2capinbuf[9], l2capinbuf[10]); // L2CAP continuation state
207 firstMessage = true;
208 }
209 } else
210 serviceNotSupported(l2capinbuf[9], l2capinbuf[10]); // The service is not supported
211 #ifdef EXTRADEBUG
212 Notify(PSTR("\r\nUUID: "), 0x80);
213 uint16_t uuid;
214 if((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000) // Check if it's sending the UUID as a 128-bit UUID
215 uuid = (l2capinbuf[18] << 8 | l2capinbuf[19]);
216 else // Short UUID
217 uuid = (l2capinbuf[16] << 8 | l2capinbuf[17]);
218 D_PrintHex<uint16_t > (uuid, 0x80);
219
220 Notify(PSTR("\r\nLength: "), 0x80);
221 uint16_t length = l2capinbuf[11] << 8 | l2capinbuf[12];
222 D_PrintHex<uint16_t > (length, 0x80);
223 Notify(PSTR("\r\nData: "), 0x80);
224 for(uint8_t i = 0; i < length; i++) {
225 D_PrintHex<uint8_t > (l2capinbuf[13 + i], 0x80);
226 Notify(PSTR(" "), 0x80);
227 }
228 #endif
229 }
230 #ifdef EXTRADEBUG
231 else {
232 Notify(PSTR("\r\nUnknown PDU: "), 0x80);
233 D_PrintHex<uint8_t > (l2capinbuf[8], 0x80);
234 }
235 #endif
236 } else if(l2capinbuf[6] == rfcomm_dcid[0] && l2capinbuf[7] == rfcomm_dcid[1]) { // RFCOMM
237 rfcommChannel = l2capinbuf[8] & 0xF8;
238 rfcommDirection = l2capinbuf[8] & 0x04;
239 rfcommCommandResponse = l2capinbuf[8] & 0x02;
240 rfcommChannelType = l2capinbuf[9] & 0xEF;
241 rfcommPfBit = l2capinbuf[9] & 0x10;
242
243 if(rfcommChannel >> 3 != 0x00)
244 rfcommChannelConnection = rfcommChannel;
245
246 #ifdef EXTRADEBUG
247 Notify(PSTR("\r\nRFCOMM Channel: "), 0x80);
248 D_PrintHex<uint8_t > (rfcommChannel >> 3, 0x80);
249 Notify(PSTR(" Direction: "), 0x80);
250 D_PrintHex<uint8_t > (rfcommDirection >> 2, 0x80);
251 Notify(PSTR(" CommandResponse: "), 0x80);
252 D_PrintHex<uint8_t > (rfcommCommandResponse >> 1, 0x80);
253 Notify(PSTR(" ChannelType: "), 0x80);
254 D_PrintHex<uint8_t > (rfcommChannelType, 0x80);
255 Notify(PSTR(" PF_BIT: "), 0x80);
256 D_PrintHex<uint8_t > (rfcommPfBit, 0x80);
257 #endif
258 if(rfcommChannelType == RFCOMM_DISC) {
259 #ifdef DEBUG_USB_HOST
260 Notify(PSTR("\r\nReceived Disconnect RFCOMM Command on channel: "), 0x80);
261 D_PrintHex<uint8_t > (rfcommChannel >> 3, 0x80);
262 #endif
263 connected = false;
264 sendRfcomm(rfcommChannel, rfcommDirection, rfcommCommandResponse, RFCOMM_UA, rfcommPfBit, rfcommbuf, 0x00); // UA Command
265 }
266 if(connected) {
267 /* Read the incoming message */
268 if(rfcommChannelType == RFCOMM_UIH && rfcommChannel == rfcommChannelConnection) {
269 uint8_t length = l2capinbuf[10] >> 1; // Get length
270 uint8_t offset = l2capinbuf[4] - length - 4; // Check if there is credit
271 if(checkFcs(&l2capinbuf[8], l2capinbuf[11 + length + offset])) {
272 uint8_t i = 0;
273 for(; i < length; i++) {
274 if(rfcommAvailable + i >= sizeof (rfcommDataBuffer)) {
275 #ifdef DEBUG_USB_HOST
276 Notify(PSTR("\r\nWarning: Buffer is full!"), 0x80);
277 #endif
278 break;
279 }
280 rfcommDataBuffer[rfcommAvailable + i] = l2capinbuf[11 + i + offset];
281 }
282 rfcommAvailable += i;
283 #ifdef EXTRADEBUG
284 Notify(PSTR("\r\nRFCOMM Data Available: "), 0x80);
285 Notify(rfcommAvailable, 0x80);
286 if(offset) {
287 Notify(PSTR(" - Credit: 0x"), 0x80);
288 D_PrintHex<uint8_t > (l2capinbuf[11], 0x80);
289 }
290 #endif
291 }
292 #ifdef DEBUG_USB_HOST
293 else
294 Notify(PSTR("\r\nError in FCS checksum!"), 0x80);
295 #endif
296 #ifdef PRINTREPORT // Uncomment "#define PRINTREPORT" to print the report send to the Arduino via Bluetooth
297 for(uint8_t i = 0; i < length; i++)
298 Notifyc(l2capinbuf[i + 11 + offset], 0x80);
299 #endif
300 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_RPN_CMD) { // UIH Remote Port Negotiation Command
301 #ifdef DEBUG_USB_HOST
302 Notify(PSTR("\r\nReceived UIH Remote Port Negotiation Command"), 0x80);
303 #endif
304 rfcommbuf[0] = BT_RFCOMM_RPN_RSP; // Command
305 rfcommbuf[1] = l2capinbuf[12]; // Length and shiftet like so: length << 1 | 1
306 rfcommbuf[2] = l2capinbuf[13]; // Channel: channel << 1 | 1
307 rfcommbuf[3] = l2capinbuf[14]; // Pre difined for Bluetooth, see 5.5.3 of TS 07.10 Adaption for RFCOMM
308 rfcommbuf[4] = l2capinbuf[15]; // Priority
309 rfcommbuf[5] = l2capinbuf[16]; // Timer
310 rfcommbuf[6] = l2capinbuf[17]; // Max Fram Size LSB
311 rfcommbuf[7] = l2capinbuf[18]; // Max Fram Size MSB
312 rfcommbuf[8] = l2capinbuf[19]; // MaxRatransm.
313 rfcommbuf[9] = l2capinbuf[20]; // Number of Frames
314 sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x0A); // UIH Remote Port Negotiation Response
315 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_MSC_CMD) { // UIH Modem Status Command
316 #ifdef DEBUG_USB_HOST
317 Notify(PSTR("\r\nSend UIH Modem Status Response"), 0x80);
318 #endif
319 rfcommbuf[0] = BT_RFCOMM_MSC_RSP; // UIH Modem Status Response
320 rfcommbuf[1] = 2 << 1 | 1; // Length and shiftet like so: length << 1 | 1
321 rfcommbuf[2] = l2capinbuf[13]; // Channel: (1 << 0) | (1 << 1) | (0 << 2) | (channel << 3)
322 rfcommbuf[3] = l2capinbuf[14];
323 sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x04);
324 }
325 } else {
326 if(rfcommChannelType == RFCOMM_SABM) { // SABM Command - this is sent twice: once for channel 0 and then for the channel to establish
327 #ifdef DEBUG_USB_HOST
328 Notify(PSTR("\r\nReceived SABM Command"), 0x80);
329 #endif
330 sendRfcomm(rfcommChannel, rfcommDirection, rfcommCommandResponse, RFCOMM_UA, rfcommPfBit, rfcommbuf, 0x00); // UA Command
331 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_PN_CMD) { // UIH Parameter Negotiation Command
332 #ifdef DEBUG_USB_HOST
333 Notify(PSTR("\r\nReceived UIH Parameter Negotiation Command"), 0x80);
334 #endif
335 rfcommbuf[0] = BT_RFCOMM_PN_RSP; // UIH Parameter Negotiation Response
336 rfcommbuf[1] = l2capinbuf[12]; // Length and shiftet like so: length << 1 | 1
337 rfcommbuf[2] = l2capinbuf[13]; // Channel: channel << 1 | 1
338 rfcommbuf[3] = 0xE0; // Pre difined for Bluetooth, see 5.5.3 of TS 07.10 Adaption for RFCOMM
339 rfcommbuf[4] = 0x00; // Priority
340 rfcommbuf[5] = 0x00; // Timer
341 rfcommbuf[6] = BULK_MAXPKTSIZE - 14; // Max Fram Size LSB - set to the size of received data (50)
342 rfcommbuf[7] = 0x00; // Max Fram Size MSB
343 rfcommbuf[8] = 0x00; // MaxRatransm.
344 rfcommbuf[9] = 0x00; // Number of Frames
345 sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x0A);
346 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_MSC_CMD) { // UIH Modem Status Command
347 #ifdef DEBUG_USB_HOST
348 Notify(PSTR("\r\nSend UIH Modem Status Response"), 0x80);
349 #endif
350 rfcommbuf[0] = BT_RFCOMM_MSC_RSP; // UIH Modem Status Response
351 rfcommbuf[1] = 2 << 1 | 1; // Length and shiftet like so: length << 1 | 1
352 rfcommbuf[2] = l2capinbuf[13]; // Channel: (1 << 0) | (1 << 1) | (0 << 2) | (channel << 3)
353 rfcommbuf[3] = l2capinbuf[14];
354 sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x04);
355
356 delay(1);
357 #ifdef DEBUG_USB_HOST
358 Notify(PSTR("\r\nSend UIH Modem Status Command"), 0x80);
359 #endif
360 rfcommbuf[0] = BT_RFCOMM_MSC_CMD; // UIH Modem Status Command
361 rfcommbuf[1] = 2 << 1 | 1; // Length and shiftet like so: length << 1 | 1
362 rfcommbuf[2] = l2capinbuf[13]; // Channel: (1 << 0) | (1 << 1) | (0 << 2) | (channel << 3)
363 rfcommbuf[3] = 0x8D; // Can receive frames (YES), Ready to Communicate (YES), Ready to Receive (YES), Incomig Call (NO), Data is Value (YES)
364
365 sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x04);
366 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_MSC_RSP) { // UIH Modem Status Response
367 if(!creditSent) {
368 #ifdef DEBUG_USB_HOST
369 Notify(PSTR("\r\nSend UIH Command with credit"), 0x80);
370 #endif
371 sendRfcommCredit(rfcommChannelConnection, rfcommDirection, 0, RFCOMM_UIH, 0x10, sizeof (rfcommDataBuffer)); // Send credit
372 creditSent = true;
373 timer = millis();
374 waitForLastCommand = true;
375 }
376 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[10] == 0x01) { // UIH Command with credit
377 #ifdef DEBUG_USB_HOST
378 Notify(PSTR("\r\nReceived UIH Command with credit"), 0x80);
379 #endif
380 } else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_RPN_CMD) { // UIH Remote Port Negotiation Command
381 #ifdef DEBUG_USB_HOST
382 Notify(PSTR("\r\nReceived UIH Remote Port Negotiation Command"), 0x80);
383 #endif
384 rfcommbuf[0] = BT_RFCOMM_RPN_RSP; // Command
385 rfcommbuf[1] = l2capinbuf[12]; // Length and shiftet like so: length << 1 | 1
386 rfcommbuf[2] = l2capinbuf[13]; // Channel: channel << 1 | 1
387 rfcommbuf[3] = l2capinbuf[14]; // Pre difined for Bluetooth, see 5.5.3 of TS 07.10 Adaption for RFCOMM
388 rfcommbuf[4] = l2capinbuf[15]; // Priority
389 rfcommbuf[5] = l2capinbuf[16]; // Timer
390 rfcommbuf[6] = l2capinbuf[17]; // Max Fram Size LSB
391 rfcommbuf[7] = l2capinbuf[18]; // Max Fram Size MSB
392 rfcommbuf[8] = l2capinbuf[19]; // MaxRatransm.
393 rfcommbuf[9] = l2capinbuf[20]; // Number of Frames
394 sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x0A); // UIH Remote Port Negotiation Response
395 #ifdef DEBUG_USB_HOST
396 Notify(PSTR("\r\nRFCOMM Connection is now established\r\n"), 0x80);
397 #endif
398 onInit();
399 }
400 #ifdef EXTRADEBUG
401 else if(rfcommChannelType != RFCOMM_DISC) {
402 Notify(PSTR("\r\nUnsupported RFCOMM Data - ChannelType: "), 0x80);
403 D_PrintHex<uint8_t > (rfcommChannelType, 0x80);
404 Notify(PSTR(" Command: "), 0x80);
405 D_PrintHex<uint8_t > (l2capinbuf[11], 0x80);
406 }
407 #endif
408 }
409 }
410 #ifdef EXTRADEBUG
411 else {
412 Notify(PSTR("\r\nUnsupported L2CAP Data - Channel ID: "), 0x80);
413 D_PrintHex<uint8_t > (l2capinbuf[7], 0x80);
414 Notify(PSTR(" "), 0x80);
415 D_PrintHex<uint8_t > (l2capinbuf[6], 0x80);
416 }
417 #endif
418 SDP_task();
419 RFCOMM_task();
420 }
421 }
422
423 void SPP::Run() {
424 if(waitForLastCommand && (millis() - timer) > 100) { // We will only wait 100ms and see if the UIH Remote Port Negotiation Command is send, as some deviced don't send it
425 #ifdef DEBUG_USB_HOST
426 Notify(PSTR("\r\nRFCOMM Connection is now established - Automatic\r\n"), 0x80);
427 #endif
428 onInit();
429 }
430 send(); // Send all bytes currently in the buffer
431 }
432
433 void SPP::onInit() {
434 creditSent = false;
435 waitForLastCommand = false;
436 connected = true; // The RFCOMM channel is now established
437 sppIndex = 0;
438 if(pFuncOnInit)
439 pFuncOnInit(); // Call the user function
440 };
441
442 void SPP::SDP_task() {
443 switch(l2cap_sdp_state) {
444 case L2CAP_SDP_WAIT:
445 if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST)) {
446 l2cap_clear_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST); // Clear flag
447 #ifdef DEBUG_USB_HOST
448 Notify(PSTR("\r\nSDP Incoming Connection Request"), 0x80);
449 #endif
450 pBtd->l2cap_connection_response(hci_handle, identifier, sdp_dcid, sdp_scid, PENDING);
451 delay(1);
452 pBtd->l2cap_connection_response(hci_handle, identifier, sdp_dcid, sdp_scid, SUCCESSFUL);
453 identifier++;
454 delay(1);
455 pBtd->l2cap_config_request(hci_handle, identifier, sdp_scid);
456 l2cap_sdp_state = L2CAP_SDP_SUCCESS;
457 } else if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST)) {
458 l2cap_clear_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST); // Clear flag
459 SDPConnected = false;
460 #ifdef DEBUG_USB_HOST
461 Notify(PSTR("\r\nDisconnected SDP Channel"), 0x80);
462 #endif
463 pBtd->l2cap_disconnection_response(hci_handle, identifier, sdp_dcid, sdp_scid);
464 }
465 break;
466 case L2CAP_SDP_SUCCESS:
467 if(l2cap_check_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS)) {
468 l2cap_clear_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS); // Clear flag
469 #ifdef DEBUG_USB_HOST
470 Notify(PSTR("\r\nSDP Successfully Configured"), 0x80);
471 #endif
472 firstMessage = true; // Reset bool
473 SDPConnected = true;
474 l2cap_sdp_state = L2CAP_SDP_WAIT;
475 }
476 break;
477
478 case L2CAP_DISCONNECT_RESPONSE: // This is for both disconnection response from the RFCOMM and SDP channel if they were connected
479 if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_RESPONSE)) {
480 #ifdef DEBUG_USB_HOST
481 Notify(PSTR("\r\nDisconnected L2CAP Connection"), 0x80);
482 #endif
483 pBtd->hci_disconnect(hci_handle);
484 hci_handle = -1; // Reset handle
485 Reset();
486 }
487 break;
488 }
489 }
490
491 void SPP::RFCOMM_task() {
492 switch(l2cap_rfcomm_state) {
493 case L2CAP_RFCOMM_WAIT:
494 if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_RFCOMM_REQUEST)) {
495 l2cap_clear_flag(L2CAP_FLAG_CONNECTION_RFCOMM_REQUEST); // Clear flag
496 #ifdef DEBUG_USB_HOST
497 Notify(PSTR("\r\nRFCOMM Incoming Connection Request"), 0x80);
498 #endif
499 pBtd->l2cap_connection_response(hci_handle, identifier, rfcomm_dcid, rfcomm_scid, PENDING);
500 delay(1);
501 pBtd->l2cap_connection_response(hci_handle, identifier, rfcomm_dcid, rfcomm_scid, SUCCESSFUL);
502 identifier++;
503 delay(1);
504 pBtd->l2cap_config_request(hci_handle, identifier, rfcomm_scid);
505 l2cap_rfcomm_state = L2CAP_RFCOMM_SUCCESS;
506 } else if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_RFCOMM_REQUEST)) {
507 l2cap_clear_flag(L2CAP_FLAG_DISCONNECT_RFCOMM_REQUEST); // Clear flag
508 RFCOMMConnected = false;
509 connected = false;
510 #ifdef DEBUG_USB_HOST
511 Notify(PSTR("\r\nDisconnected RFCOMM Channel"), 0x80);
512 #endif
513 pBtd->l2cap_disconnection_response(hci_handle, identifier, rfcomm_dcid, rfcomm_scid);
514 }
515 break;
516 case L2CAP_RFCOMM_SUCCESS:
517 if(l2cap_check_flag(L2CAP_FLAG_CONFIG_RFCOMM_SUCCESS)) {
518 l2cap_clear_flag(L2CAP_FLAG_CONFIG_RFCOMM_SUCCESS); // Clear flag
519 #ifdef DEBUG_USB_HOST
520 Notify(PSTR("\r\nRFCOMM Successfully Configured"), 0x80);
521 #endif
522 rfcommAvailable = 0; // Reset number of bytes available
523 bytesRead = 0; // Reset number of bytes received
524 RFCOMMConnected = true;
525 l2cap_rfcomm_state = L2CAP_RFCOMM_WAIT;
526 }
527 break;
528 }
529 }
530 /************************************************************/
531 /* SDP Commands */
532
533 /************************************************************/
534 void SPP::SDP_Command(uint8_t* data, uint8_t nbytes) { // See page 223 in the Bluetooth specs
535 pBtd->L2CAP_Command(hci_handle, data, nbytes, sdp_scid[0], sdp_scid[1]);
536 }
537
538 void SPP::serviceNotSupported(uint8_t transactionIDHigh, uint8_t transactionIDLow) { // See page 235 in the Bluetooth specs
539 l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU;
540 l2capoutbuf[1] = transactionIDHigh;
541 l2capoutbuf[2] = transactionIDLow;
542 l2capoutbuf[3] = 0x00; // MSB Parameter Length
543 l2capoutbuf[4] = 0x05; // LSB Parameter Length = 5
544 l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount
545 l2capoutbuf[6] = 0x02; // LSB AttributeListsByteCount = 2
546
547 /* Attribute ID/Value Sequence: */
548 l2capoutbuf[7] = 0x35; // Data element sequence - length in next byte
549 l2capoutbuf[8] = 0x00; // Length = 0
550 l2capoutbuf[9] = 0x00; // No continuation state
551
552 SDP_Command(l2capoutbuf, 10);
553 }
554
555 void SPP::serialPortResponse1(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
556 l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU;
557 l2capoutbuf[1] = transactionIDHigh;
558 l2capoutbuf[2] = transactionIDLow;
559 l2capoutbuf[3] = 0x00; // MSB Parameter Length
560 l2capoutbuf[4] = 0x2B; // LSB Parameter Length = 43
561 l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount
562 l2capoutbuf[6] = 0x26; // LSB AttributeListsByteCount = 38
563
564 /* Attribute ID/Value Sequence: */
565 l2capoutbuf[7] = 0x36; // Data element sequence - length in next two bytes
566 l2capoutbuf[8] = 0x00; // MSB Length
567 l2capoutbuf[9] = 0x3C; // LSB Length = 60
568
569 l2capoutbuf[10] = 0x36; // Data element sequence - length in next two bytes
570 l2capoutbuf[11] = 0x00; // MSB Length
571 l2capoutbuf[12] = 0x39; // LSB Length = 57
572
573 l2capoutbuf[13] = 0x09; // Unsigned Integer - length 2 bytes
574 l2capoutbuf[14] = 0x00; // MSB ServiceRecordHandle
575 l2capoutbuf[15] = 0x00; // LSB ServiceRecordHandle
576 l2capoutbuf[16] = 0x0A; // Unsigned int - length 4 bytes
577 l2capoutbuf[17] = 0x00; // ServiceRecordHandle value - TODO: Is this related to HCI_Handle?
578 l2capoutbuf[18] = 0x01;
579 l2capoutbuf[19] = 0x00;
580 l2capoutbuf[20] = 0x06;
581
582 l2capoutbuf[21] = 0x09; // Unsigned Integer - length 2 bytes
583 l2capoutbuf[22] = 0x00; // MSB ServiceClassIDList
584 l2capoutbuf[23] = 0x01; // LSB ServiceClassIDList
585 l2capoutbuf[24] = 0x35; // Data element sequence - length in next byte
586 l2capoutbuf[25] = 0x03; // Length = 3
587 l2capoutbuf[26] = 0x19; // UUID (universally unique identifier) - length = 2 bytes
588 l2capoutbuf[27] = 0x11; // MSB SerialPort
589 l2capoutbuf[28] = 0x01; // LSB SerialPort
590
591 l2capoutbuf[29] = 0x09; // Unsigned Integer - length 2 bytes
592 l2capoutbuf[30] = 0x00; // MSB ProtocolDescriptorList
593 l2capoutbuf[31] = 0x04; // LSB ProtocolDescriptorList
594 l2capoutbuf[32] = 0x35; // Data element sequence - length in next byte
595 l2capoutbuf[33] = 0x0C; // Length = 12
596
597 l2capoutbuf[34] = 0x35; // Data element sequence - length in next byte
598 l2capoutbuf[35] = 0x03; // Length = 3
599 l2capoutbuf[36] = 0x19; // UUID (universally unique identifier) - length = 2 bytes
600 l2capoutbuf[37] = 0x01; // MSB L2CAP
601 l2capoutbuf[38] = 0x00; // LSB L2CAP
602
603 l2capoutbuf[39] = 0x35; // Data element sequence - length in next byte
604 l2capoutbuf[40] = 0x05; // Length = 5
605 l2capoutbuf[41] = 0x19; // UUID (universally unique identifier) - length = 2 bytes
606 l2capoutbuf[42] = 0x00; // MSB RFCOMM
607 l2capoutbuf[43] = 0x03; // LSB RFCOMM
608 l2capoutbuf[44] = 0x08; // Unsigned Integer - length 1 byte
609
610 l2capoutbuf[45] = 0x02; // ContinuationState - Two more bytes
611 l2capoutbuf[46] = 0x00; // MSB length
612 l2capoutbuf[47] = 0x19; // LSB length = 25 more bytes to come
613
614 SDP_Command(l2capoutbuf, 48);
615 }
616
617 void SPP::serialPortResponse2(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
618 l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU;
619 l2capoutbuf[1] = transactionIDHigh;
620 l2capoutbuf[2] = transactionIDLow;
621 l2capoutbuf[3] = 0x00; // MSB Parameter Length
622 l2capoutbuf[4] = 0x1C; // LSB Parameter Length = 28
623 l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount
624 l2capoutbuf[6] = 0x19; // LSB AttributeListsByteCount = 25
625
626 /* Attribute ID/Value Sequence: */
627 l2capoutbuf[7] = 0x01; // Channel 1 - TODO: Try different values, so multiple servers can be used at once
628
629 l2capoutbuf[8] = 0x09; // Unsigned Integer - length 2 bytes
630 l2capoutbuf[9] = 0x00; // MSB LanguageBaseAttributeIDList
631 l2capoutbuf[10] = 0x06; // LSB LanguageBaseAttributeIDList
632 l2capoutbuf[11] = 0x35; // Data element sequence - length in next byte
633 l2capoutbuf[12] = 0x09; // Length = 9
634
635 // Identifier representing the natural language = en = English - see: "ISO 639:1988"
636 l2capoutbuf[13] = 0x09; // Unsigned Integer - length 2 bytes
637 l2capoutbuf[14] = 0x65; // 'e'
638 l2capoutbuf[15] = 0x6E; // 'n'
639
640 // "The second element of each triplet contains an identifier that specifies a character encoding used for the language"
641 // Encoding is set to 106 (UTF-8) - see: http://www.iana.org/assignments/character-sets/character-sets.xhtml
642 l2capoutbuf[16] = 0x09; // Unsigned Integer - length 2 bytes
643 l2capoutbuf[17] = 0x00; // MSB of character encoding
644 l2capoutbuf[18] = 0x6A; // LSB of character encoding (106)
645
646 // Attribute ID that serves as the base attribute ID for the natural language in the service record
647 // "To facilitate the retrieval of human-readable universal attributes in a principal language, the base attribute ID value for the primary language supported by a service record shall be 0x0100"
648 l2capoutbuf[19] = 0x09; // Unsigned Integer - length 2 bytes
649 l2capoutbuf[20] = 0x01;
650 l2capoutbuf[21] = 0x00;
651
652 l2capoutbuf[22] = 0x09; // Unsigned Integer - length 2 bytes
653 l2capoutbuf[23] = 0x01; // MSB ServiceDescription
654 l2capoutbuf[24] = 0x00; // LSB ServiceDescription
655
656 l2capoutbuf[25] = 0x25; // Text string - length in next byte
657 l2capoutbuf[26] = 0x05; // Name length
658 l2capoutbuf[27] = 'T';
659 l2capoutbuf[28] = 'K';
660 l2capoutbuf[29] = 'J';
661 l2capoutbuf[30] = 'S';
662 l2capoutbuf[31] = 'P';
663 l2capoutbuf[32] = 0x00; // No continuation state
664
665 SDP_Command(l2capoutbuf, 33);
666 }
667
668 void SPP::l2capResponse1(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
669 serialPortResponse1(transactionIDHigh, transactionIDLow); // These has to send all the supported functions, since it only supports virtual serialport it just sends the message again
670 }
671
672 void SPP::l2capResponse2(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
673 serialPortResponse2(transactionIDHigh, transactionIDLow); // Same data as serialPortResponse2
674 }
675 /************************************************************/
676 /* RFCOMM Commands */
677
678 /************************************************************/
679 void SPP::RFCOMM_Command(uint8_t* data, uint8_t nbytes) {
680 pBtd->L2CAP_Command(hci_handle, data, nbytes, rfcomm_scid[0], rfcomm_scid[1]);
681 }
682
683 void SPP::sendRfcomm(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t* data, uint8_t length) {
684 l2capoutbuf[0] = channel | direction | CR | extendAddress; // RFCOMM Address
685 l2capoutbuf[1] = channelType | pfBit; // RFCOMM Control
686 l2capoutbuf[2] = length << 1 | 0x01; // Length and format (always 0x01 bytes format)
687 uint8_t i = 0;
688 for(; i < length; i++)
689 l2capoutbuf[i + 3] = data[i];
690 l2capoutbuf[i + 3] = calcFcs(l2capoutbuf);
691 #ifdef EXTRADEBUG
692 Notify(PSTR(" - RFCOMM Data: "), 0x80);
693 for(i = 0; i < length + 4; i++) {
694 D_PrintHex<uint8_t > (l2capoutbuf[i], 0x80);
695 Notify(PSTR(" "), 0x80);
696 }
697 #endif
698 RFCOMM_Command(l2capoutbuf, length + 4);
699 }
700
701 void SPP::sendRfcommCredit(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t credit) {
702 l2capoutbuf[0] = channel | direction | CR | extendAddress; // RFCOMM Address
703 l2capoutbuf[1] = channelType | pfBit; // RFCOMM Control
704 l2capoutbuf[2] = 0x01; // Length = 0
705 l2capoutbuf[3] = credit; // Credit
706 l2capoutbuf[4] = calcFcs(l2capoutbuf);
707 #ifdef EXTRADEBUG
708 Notify(PSTR(" - RFCOMM Credit Data: "), 0x80);
709 for(uint8_t i = 0; i < 5; i++) {
710 D_PrintHex<uint8_t > (l2capoutbuf[i], 0x80);
711 Notify(PSTR(" "), 0x80);
712 }
713 #endif
714 RFCOMM_Command(l2capoutbuf, 5);
715 }
716
717 /* CRC on 2 bytes */
718 uint8_t SPP::crc(uint8_t *data) {
719 return (pgm_read_byte(&rfcomm_crc_table[pgm_read_byte(&rfcomm_crc_table[0xFF ^ data[0]]) ^ data[1]]));
720 }
721
722 /* Calculate FCS */
723 uint8_t SPP::calcFcs(uint8_t *data) {
724 uint8_t temp = crc(data);
725 if((data[1] & 0xEF) == RFCOMM_UIH)
726 return (0xFF - temp); // FCS on 2 bytes
727 else
728 return (0xFF - pgm_read_byte(&rfcomm_crc_table[temp ^ data[2]])); // FCS on 3 bytes
729 }
730
731 /* Check FCS */
732 bool SPP::checkFcs(uint8_t *data, uint8_t fcs) {
733 uint8_t temp = crc(data);
734 if((data[1] & 0xEF) != RFCOMM_UIH)
735 temp = pgm_read_byte(&rfcomm_crc_table[temp ^ data[2]]); // FCS on 3 bytes
736 return (pgm_read_byte(&rfcomm_crc_table[temp ^ fcs]) == 0xCF);
737 }
738
739 /* Serial commands */
740 #if defined(ARDUINO) && ARDUINO >=100
741
742 size_t SPP::write(uint8_t data) {
743 return write(&data, 1);
744 }
745 #else
746
747 void SPP::write(uint8_t data) {
748 write(&data, 1);
749 }
750 #endif
751
752 #if defined(ARDUINO) && ARDUINO >=100
753
754 size_t SPP::write(const uint8_t *data, size_t size) {
755 #else
756
757 void SPP::write(const uint8_t *data, size_t size) {
758 #endif
759 for(uint8_t i = 0; i < size; i++) {
760 if(sppIndex >= sizeof (sppOutputBuffer) / sizeof (sppOutputBuffer[0]))
761 send(); // Send the current data in the buffer
762 sppOutputBuffer[sppIndex++] = data[i]; // All the bytes are put into a buffer and then send using the send() function
763 }
764 #if defined(ARDUINO) && ARDUINO >=100
765 return size;
766 #endif
767 }
768
769 void SPP::send() {
770 if(!connected || !sppIndex)
771 return;
772 uint8_t length; // This is the length of the string we are sending
773 uint8_t offset = 0; // This is used to keep track of where we are in the string
774
775 l2capoutbuf[0] = rfcommChannelConnection | 0 | 0 | extendAddress; // RFCOMM Address
776 l2capoutbuf[1] = RFCOMM_UIH; // RFCOMM Control
777
778 while(sppIndex) { // We will run this while loop until this variable is 0
779 if(sppIndex > (sizeof (l2capoutbuf) - 4)) // Check if the string is larger than the outgoing buffer
780 length = sizeof (l2capoutbuf) - 4;
781 else
782 length = sppIndex;
783
784 l2capoutbuf[2] = length << 1 | 1; // Length
785 uint8_t i = 0;
786 for(; i < length; i++)
787 l2capoutbuf[i + 3] = sppOutputBuffer[i + offset];
788 l2capoutbuf[i + 3] = calcFcs(l2capoutbuf); // Calculate checksum
789
790 RFCOMM_Command(l2capoutbuf, length + 4);
791
792 sppIndex -= length;
793 offset += length; // Increment the offset
794 }
795 }
796
797 int SPP::available(void) {
798 return rfcommAvailable;
799 };
800
801 void SPP::discard(void) {
802 rfcommAvailable = 0;
803 }
804
805 int SPP::peek(void) {
806 if(rfcommAvailable == 0) // Don't read if there is nothing in the buffer
807 return -1;
808 return rfcommDataBuffer[0];
809 }
810
811 int SPP::read(void) {
812 if(rfcommAvailable == 0) // Don't read if there is nothing in the buffer
813 return -1;
814 uint8_t output = rfcommDataBuffer[0];
815 for(uint8_t i = 1; i < rfcommAvailable; i++)
816 rfcommDataBuffer[i - 1] = rfcommDataBuffer[i]; // Shift the buffer one left
817 rfcommAvailable--;
818 bytesRead++;
819 if(bytesRead > (sizeof (rfcommDataBuffer) - 5)) { // We will send the command just before it runs out of credit
820 bytesRead = 0;
821 sendRfcommCredit(rfcommChannelConnection, rfcommDirection, 0, RFCOMM_UIH, 0x10, sizeof (rfcommDataBuffer)); // Send more credit
822 #ifdef EXTRADEBUG
823 Notify(PSTR("\r\nSent "), 0x80);
824 Notify((uint8_t)sizeof (rfcommDataBuffer), 0x80);
825 Notify(PSTR(" more credit"), 0x80);
826 #endif
827 }
828 return output;
829 }
custom keymap for my minivan; forked from http://github.com/evangs/tmk_keyboard
Imprint / Impressum