protocol/usb_hid/USB_Host_Shield_2.0/WiiCameraReadme.md

   1 Please see <http://wiibrew.org/wiki/Wiimote#IR_Camera> for the complete capabilities of the Wii camera. The IR camera code was written based on the above website and with support from Kristian Lauszus.
   2
   3 This library is large, if you run into memory problems when uploading to the Arduino, disable serial debugging.
   4
   5 To enable the IR camera code, simply set ```ENABLE_WII_IR_CAMERA``` to 1 in [settings.h](settings.h).
   6
   7 This library implements the following settings:
   8
   9 * Report sensitivity mode: 00 00 00 00 00 00 90 00 41    40 00   Suggested by inio (high sensitivity)
  10 * Data Format: Extended mode (0x03).  Full mode is not working yet. The output reports 0x3e and 0x3f need tampering with
  11         * In this mode the camera outputs x and y coordinates and a size dimension for the 4 brightest points.
  12
  13 Again, read through <http://wiibrew.org/wiki/Wiimote#IR_Camera> to get an understanding of the camera and its settings.