protocol/usb_hid/USB_Host_Shield_2.0/examples/PSBuzz/PSBuzz.ino

   1 /*
   2  Example sketch for the Playstation Buzz library - developed by Kristian Lauszus
   3  For more information visit my blog: http://blog.tkjelectronics.dk/ or
   4  send me an e-mail:  kristianl@tkjelectronics.com
   5  */
   6
   7 #include <PSBuzz.h>
   8
   9 // Satisfy the IDE, which needs to see the include statment in the ino too.
  10 #ifdef dobogusinclude
  11 #include <spi4teensy3.h>
  12 #include <SPI.h>
  13 #endif
  14
  15 USB Usb;
  16 PSBuzz Buzz(&Usb);
  17
  18 void setup() {
  19   Serial.begin(115200);
  20 #if !defined(__MIPSEL__)
  21   while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
  22 #endif
  23   if (Usb.Init() == -1) {
  24     Serial.print(F("\r\nOSC did not start"));
  25     while (1); // Halt
  26   }
  27   Serial.println(F("\r\nPS Buzz Library Started"));
  28 }
  29
  30 void loop() {
  31   Usb.Task();
  32
  33   if (Buzz.connected()) {
  34     for (uint8_t i = 0; i < 4; i++) {
  35       if (Buzz.getButtonClick(RED, i)) {
  36         Buzz.setLedToggle(i); // Toggle the LED
  37         Serial.println(F("RED"));
  38       }
  39       if (Buzz.getButtonClick(YELLOW, i))
  40         Serial.println(F("YELLOW"));
  41       if (Buzz.getButtonClick(GREEN, i))
  42         Serial.println(F("GREEN"));
  43       if (Buzz.getButtonClick(ORANGE, i))
  44         Serial.println(F("ORANGE"));
  45       if (Buzz.getButtonClick(BLUE, i))
  46         Serial.println(F("BLUE"));
  47     }
  48   }
  49 }