protocol/usb_hid/USB_Host_Shield_2.0/settings.h

   1 /* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
   2
   3 This software may be distributed and modified under the terms of the GNU
   4 General Public License version 2 (GPL2) as published by the Free Software
   5 Foundation and appearing in the file GPL2.TXT included in the packaging of
   6 this file. Please note that GPL2 Section 2[b] requires that all works based
   7 on this software must also be made publicly available under the terms of
   8 the GPL2 ("Copyleft").
   9
  10 Contact information
  11 -------------------
  12
  13 Circuits At Home, LTD
  14 Web      :  http://www.circuitsathome.com
  15 e-mail   :  support@circuitsathome.com
  16  */
  17
  18 #ifndef USB_HOST_SHIELD_SETTINGS_H
  19 #define USB_HOST_SHIELD_SETTINGS_H
  20 #include "macros.h"
  21
  22 ////////////////////////////////////////////////////////////////////////////////
  23 // DEBUGGING
  24 ////////////////////////////////////////////////////////////////////////////////
  25
  26 /* Set this to 1 to activate serial debugging */
  27 #define ENABLE_UHS_DEBUGGING 0
  28
  29 /* This can be used to select which serial port to use for debugging if
  30  * multiple serial ports are available.
  31  * For example Serial3.
  32  */
  33 #ifndef USB_HOST_SERIAL
  34 #define USB_HOST_SERIAL Serial
  35 #endif
  36
  37 ////////////////////////////////////////////////////////////////////////////////
  38 // Manual board activation
  39 ////////////////////////////////////////////////////////////////////////////////
  40
  41 /* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */
  42 #define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually
  43
  44 /* Set this to 1 if you are using a Black Widdow */
  45 #define USE_UHS_BLACK_WIDDOW 0
  46
  47 /* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */
  48 #define USE_XMEM_SPI_LOCK 0
  49
  50 ////////////////////////////////////////////////////////////////////////////////
  51 // Wii IR camera
  52 ////////////////////////////////////////////////////////////////////////////////
  53
  54 /* Set this to 1 to activate code for the Wii IR camera */
  55 #define ENABLE_WII_IR_CAMERA 0
  56
  57 ////////////////////////////////////////////////////////////////////////////////
  58 // MASS STORAGE
  59 ////////////////////////////////////////////////////////////////////////////////
  60 // <<<<<<<<<<<<<<<< IMPORTANT >>>>>>>>>>>>>>>
  61 // Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives.
  62 // Each LUN needs ~13 bytes to be able to track the state of each unit.
  63 #ifndef MASS_MAX_SUPPORTED_LUN
  64 #define MASS_MAX_SUPPORTED_LUN 8
  65 #endif
  66
  67 ////////////////////////////////////////////////////////////////////////////////
  68 // Set to 1 to use the faster spi4teensy3 driver.
  69 ////////////////////////////////////////////////////////////////////////////////
  70 #ifndef USE_SPI4TEENSY3
  71 #define USE_SPI4TEENSY3 1
  72 #endif
  73
  74 ////////////////////////////////////////////////////////////////////////////////
  75 // AUTOMATIC Settings
  76 ////////////////////////////////////////////////////////////////////////////////
  77
  78 // No user serviceable parts below this line.
  79 // DO NOT change anything below here unless you are a developer!
  80
  81 #include "version_helper.h"
  82
  83 #if defined(__GNUC__) && defined(__AVR__)
  84 #ifndef GCC_VERSION
  85 #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
  86 #endif
  87 #if GCC_VERSION < 40602 // Test for GCC < 4.6.2
  88 #ifdef PROGMEM
  89 #undef PROGMEM
  90 #define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4
  91 #ifdef PSTR
  92 #undef PSTR
  93 #define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source
  94 #endif
  95 #endif
  96 #endif
  97 #endif
  98
  99 #if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING
 100 #define DEBUG_USB_HOST
 101 #endif
 102
 103 #if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA
 104 #define WIICAMERA
 105 #endif
 106
 107 // To use some other locking (e.g. freertos),
 108 // define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock.
 109 // NOTE: NO argument is passed. You have to do this within your routine for
 110 // whatever you are using to lock and unlock.
 111 #if !defined(XMEM_ACQUIRE_SPI)
 112 #if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API)
 113 #include <xmem.h>
 114 #else
 115 #define XMEM_ACQUIRE_SPI() (void(0))
 116 #define XMEM_RELEASE_SPI() (void(0))
 117 #endif
 118 #endif
 119
 120 #if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP)
 121 #include <xmem.h>
 122 #else
 123 #define EXT_RAM 0
 124 #endif
 125
 126 #if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__))
 127 #define USING_SPI4TEENSY3 USE_SPI4TEENSY3
 128 #else
 129 #define USING_SPI4TEENSY3 0
 130 #endif
 131
 132 #if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(RBL_NRF51822) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3
 133 #include <SPI.h> // Use the Arduino SPI library for the Arduino Due, RedBearLab nRF51822, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available
 134 #endif
 135 #if defined(__PIC32MX__) || defined(__PIC32MZ__)
 136 #include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library
 137 #endif
 138
 139 #endif /* SETTINGS_H */