converter/x68k_usb/Makefile

   1 #
   2 # Makefile for PJRC Teensy
   3 #
   4
   5
   6 # Target file name (without extension).
   7 TARGET = x68k_usb_pjrc
   8
   9 # Directory common source filess exist
  10 TOP_DIR = ../..
  11
  12 # Directory keyboard dependent files exist
  13 TARGET_DIR = .
  14
  15 # keyboard dependent files
  16 SRC =   keymap.c \
  17         matrix.c \
  18         led.c \
  19         x68k.c
  20
  21 CONFIG_H = config_pjrc.h
  22
  23
  24 # MCU name, you MUST set this to match the board you are using
  25 # type "make clean" after changing this, so all files will be rebuilt
  26 #MCU = at90usb162       # Teensy 1.0
  27 MCU = atmega32u4       # Teensy 2.0
  28 #MCU = at90usb646       # Teensy++ 1.0
  29 #MCU = at90usb1286      # Teensy++ 2.0
  30
  31
  32 # Processor frequency.
  33 #   Normally the first thing your program should do is set the clock prescaler,
  34 #   so your program will run at the correct speed.  You should also set this
  35 #   variable to same clock speed.  The _delay_ms() macro uses this, and many
  36 #   examples use this variable to calculate timings.  Do not add a "UL" here.
  37 F_CPU = 16000000
  38
  39
  40 # Build Options
  41 #   *Comment out* to disable the options.
  42 #
  43 MOUSEKEY_ENABLE = yes   # Mouse keys
  44 EXTRAKEY_ENABLE = yes   # Audio control and System control
  45 NKRO_ENABLE = yes       # USB Nkey Rollover
  46
  47
  48
  49 #---------------- Programming Options --------------------------
  50 AVRDUDE = avrdude
  51 # Type: avrdude -c ? to get a full listing.
  52 AVRDUDE_PROGRAMMER = avr109
  53 AVRDUDE_PORT = /dev/ttyACM0
  54 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  55 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  56
  57 # Uncomment the following if you want avrdude's erase cycle counter.
  58 # Note that this counter needs to be initialized first using -Yn,
  59 # see avrdude manual.
  60 #AVRDUDE_ERASE_COUNTER = -y
  61
  62 # Uncomment the following if you do /not/ wish a verification to be
  63 # performed after programming the device.
  64 #AVRDUDE_NO_VERIFY = -V
  65
  66 # Increase verbosity level.  Please use this when submitting bug
  67 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  68 # to submit bug reports.
  69 #AVRDUDE_VERBOSE = -v -v
  70
  71 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  72 #AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
  73 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  74 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  75 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  76
  77 #PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  78 #PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
  79 PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
  80
  81
  82 # Search Path
  83 VPATH += $(TARGET_DIR)
  84 VPATH += $(TOP_DIR)
  85
  86
  87 include $(TOP_DIR)/protocol/pjrc.mk
  88 include $(TOP_DIR)/protocol.mk
  89 include $(TOP_DIR)/common.mk
  90 include $(TOP_DIR)/rules.mk